diff --git a/translations/monero.ts b/translations/monero.ts index 5ca882bb3..c768d69c5 100644 --- a/translations/monero.ts +++ b/translations/monero.ts @@ -4,23 +4,23 @@ Monero::AddressBookImpl - + Invalid destination address - + Invalid payment ID. Short payment ID should only be used in an integrated address - + Invalid payment ID - - Integrated address and long payment id can't be used at the same time + + Integrated address and long payment ID can't be used at the same time @@ -37,32 +37,32 @@ - + daemon is busy. Please try again later. - + no connection to daemon. Please make sure daemon is running. - + transaction %s was rejected by daemon with status: - + . Reason: - + Unknown exception: - + Unhandled exception @@ -81,323 +81,324 @@ - + Claimed change does not go to a paid address - + Claimed change is larger than payment to the change address - + Change goes to more than one address - + sending %s to %s - + with no destinations - + %s change to %s - + no change - - Loaded %lu transactions, for %s, fee %s, %s, %s, with min mixin %lu. %s + + Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu. %s Monero::WalletImpl - + payment id has invalid format, expected 16 or 64 character hex string: - + Failed to add short payment id: - - + + daemon is busy. Please try again later. - - + + no connection to daemon. Please make sure daemon is running. - - + + RPC error: - + + + not enough outputs for specified ring size + + + + + + found outputs to use + + + + + Please sweep unmixable outputs. + + + + failed to get random outputs to mix - - + + not enough money to transfer, available only %s, sent amount %s - + failed to parse address - + failed to parse secret spend key - + No view key supplied, cancelled - + failed to parse secret view key - + failed to verify secret spend key - + spend key does not match address - + failed to verify secret view key - + view key does not match address - + failed to generate new wallet: - + + Failed to send import wallet request + + + + Failed to load unsigned transactions - + Failed to load transaction from file - + Wallet is view only - + failed to save file - + + Key images can only be imported with a trusted daemon + + + + Failed to import key images: - + + Failed to get subaddress label: + + + + + Failed to set subaddress label: + + + + failed to get random outputs to mix: %s - - + + + not enough money to transfer, overall balance only %s, sent amount %s + + + + + not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee) - - - not enough outputs for specified mixin_count - - - - - + + output amount - - - found outputs to mix - - - - - + + transaction was not constructed - - + + transaction %s was rejected by daemon with status: - - + + one of destinations is zero - - + + failed to find a suitable way to split transactions - - + + unknown transfer error: - - + + internal error: - - + + unexpected error: - - + + unknown error - + + + + + + + Failed to parse txid + + + + + no tx keys found for this txid + + + + + + Failed to parse tx key + + + + + + + + Failed to parse address + + + + + Address must not be a subaddress + + + + Rescan spent can only be used with a trusted daemon - - Monero::WalletManagerImpl - - - failed to parse txid - - - - - - failed to parse tx key - - - - - failed to parse address - - - - - failed to get transaction from daemon - - - - - failed to parse transaction from daemon - - - - - failed to validate transaction from daemon - - - - - failed to get the right transaction from daemon - - - - - failed to generate key derivation from supplied parameters - - - - - error: - - - - - received - - - - - in txid - - - - - received nothing in txid - - - Wallet - + Failed to parse address - + Failed to parse key - + failed to verify key - + key does not match address @@ -405,1227 +406,1748 @@ command_line - + yes + + + no + + cryptonote::rpc_args - + Specify IP to bind RPC server - + Specify username[:password] required for RPC server - + Confirm rpc-bind-ip value is NOT a loopback (local) IP - + + Specify a comma separated list of origins to allow cross origin resource sharing + + + + Invalid IP address given for -- - + permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with -- - + Username specified with -- - + + cannot be empty + + + requires RFC server password -- + + cryptonote::simple_wallet - + Commands: - + failed to read wallet password - + invalid password - - start_mining [<number_of_threads>] - Start mining in daemon - - - - - Stop mining in daemon - - - - - Save current blockchain data - - - - - Show current wallet balance - - - - - Show blockchain height - - - - - Show current wallet public address - - - - - Show this help - - - - + set seed: needs an argument. available options: language - + set: unrecognized argument(s) - + wallet file path not valid: - + Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting. - + usage: payment_id - - sweep_below <amount_threshold> [mixin] address [] - Send all unlocked outputs below the threshold to an address - - - - - Generate a new random full size payment id - these will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids - - - - + needs an argument - - - - - - - + + + + + + + + + + 0 or 1 - - integer >= 2 - - - - + 0, 1, 2, 3, or 4 - + + unsigned integer - + NOTE: the following 25 words can be used to recover access to your wallet. Write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control. - + --restore-deterministic-wallet uses --generate-new-wallet, not --wallet-file - + specify a recovery parameter with the --electrum-seed="words list here" - + specify a wallet path with --generate-new-wallet (not --wallet-file) - + wallet failed to connect to daemon: - + Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version. - + List of available languages for your wallet's seed: - + Enter the number corresponding to the language of your choice: - + You had been using a deprecated version of the wallet. Please use the new seed that we provide. - - + + Generated new wallet: - - + + + failed to generate new wallet: - + Opened watch-only wallet - + Opened wallet - + You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet. - + You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now. - + failed to load wallet: - + Use the "help" command to see the list of available commands. - + Wallet data saved - + Mining started in daemon - + mining has NOT been started: - + Mining stopped in daemon - + mining has NOT been stopped: - + Blockchain saved - - - + + + Height - - - + transaction - - received - - - - + spent - + unsupported transaction format - + Starting refresh... - + Refresh done, blocks received: - - + + payment id has invalid format, expected 16 or 64 character hex string: - + bad locked_blocks parameter: - - + + + a single transaction cannot use more than one payment id: - - + + + + failed to set up payment id, though it was decoded correctly - - - - - + + + + + + + + transaction cancelled. - + + + Is this okay anyway? (Y/Yes/N/No): + + + + + There is currently a %u block backlog at that fee level. Is this okay? (Y/Yes/N/No): + + + + + Failed to check for backlog: + + + + + + +Transaction + + + + + + Spending from address index %d + + + + + + + WARNING: Outputs of multiple addresses are being used together, which might potentially compromise your privacy. + + + + + Sending %s. - + Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s - + The transaction fee is %s - + , of which %s is dust from change - + . - + A total of %s from dust change will be sent to dust address - + . This transaction will unlock on block %llu, in approximately %s days (assuming 2 minutes per block) - - - + + + + + + + + Failed to write transaction(s) to file - - - + + + + + + + + Unsigned transaction(s) successfully written to file: - - - - - Not enough money in unlocked balance - - - - - - - - Failed to find a way to create transactions. This is usually due to dust which is so small it cannot pay for itself in fees, or trying to send more money than the unlocked balance, or not leaving enough for fees - - - - - - - Reason: - - - - - - - failed to find a suitable way to split transactions - - - - + No unmixable outputs found - + No address given - + + failed to parse Payment ID + + + + + usage: sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] + + + + + failed to parse key image + + + + + No outputs found + + + + + Multiple transactions are created, which is not supposed to happen + + + + + The transaction uses multiple or no inputs, which is not supposed to happen + + + + missing threshold amount - + invalid amount threshold - + + donations are not enabled on the testnet + + + + + usage: donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] + + + + Claimed change does not go to a paid address - + Claimed change is larger than payment to the change address - + sending %s to %s - + + dummy output(s) + + + + with no destinations - + + Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu, %s. %sIs this okay? (Y/Yes/N/No): + + + + + This is a multisig wallet, it can only sign with sign_multisig + + + + + usage: sign_transfer [export] + + + + Failed to sign transaction - + Failed to sign transaction: - + + Transaction raw hex data exported to + + + + Failed to load transaction from file - - daemon is busy. Please try again later - - - - - - - - - + + RPC error: - + wallet is watch-only and has no spend key - + + + Your original password was incorrect. - + Error with wallet rewrite: - + priority must be 0, 1, 2, 3, or 4 - + + priority must be 0, 1, 2, 3, or 4 - - priority must be 0, 1, 2, 3, or 4 - - - - + invalid unit - + + invalid count: must be an unsigned integer - + invalid value - - Same as transfer, but using an older transaction building algorithm - - - - - sweep_all [mixin] address [] - Send all unlocked balance to an address - - - - - donate [<mixin_count>] <amount> [payment_id] - Donate <amount> to the development team (donate.getmonero.org) - - - - - set_log <level>|<categories> - Change current log detail (level must be <0-4>) - - - - - address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] - Print all entries in the address book, optionally adding/deleting an entry to/from it - - - - - show_transfers [in|out|pending|failed|pool] [<min_height> [<max_height>]] - Show incoming/outgoing transfers within an optional height range - - - - - Show information about a transfer to/from this address - - - - - Change wallet password - - - - + usage: set_log <log_level_number_0-4> | <categories> - + (Y/Yes/N/No): - - + + bad m_restore_height parameter: - + date format must be YYYY-MM-DD - + Restore height is: - - + + Is this okay? (Y/Yes/N/No): - + Daemon is local, assuming trusted - + Password for new watch-only wallet - + invalid arguments. Please use start_mining [<number_of_threads>] [do_bg_mining] [ignore_battery], <number_of_threads> should be from 1 to - - - - - + internal error: - - - - - - + + + unexpected error: - - - - - - + + + + + + + + + unknown error - + refresh failed: - + Blocks received: - + unlocked balance: - - - + + + amount - - spent + + false - - global index + + Unknown command: - - tx id + + Command usage: - - No incoming transfers + + Command description: - - No incoming available transfers + + wallet is multisig but not yet finalized - - No incoming unavailable transfers + + Enter optional seed encryption passphrase, empty to see raw seed - - expected at least one payment ID + + Failed to retrieve seed - - payment + + wallet is multisig and has no seed - - transaction + + Cannot connect to daemon - - height + + Current fee is %s monero per kB - - unlock time - - - - - No payments with id - - - - - - - failed to get blockchain height: - - - - - failed to connect to the daemon - - - - - -Transaction %llu/%llu: txid=%s - - - - - -Input %llu/%llu: amount=%s - - - - - failed to get output: - - - - - output key's originating block height shouldn't be higher than the blockchain height - - - - - -Originating block heights: - - - - - -| - - - - - - | - - - - - - -Warning: Some input keys being spent are from - - - - - , which can break the anonymity of ring signature. Make sure this is intentional! - - - - - - wrong number of arguments - - - - - - No payment id is included with this transaction. Is this okay? (Y/Yes/N/No): - - - - - - No outputs found, or daemon is not ready - - - - - - - - failed to get random outputs to mix: - - - - - - Sweeping %s in %llu transactions for a total fee of %s. Is this okay? (Y/Yes/N/No): - - - - - Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No): - - - - - Donating - - - - - Loaded %lu transactions, for %s, fee %s, %s, %s, with min mixin %lu. %sIs this okay? (Y/Yes/N/No): - - - - - This is a watch only wallet - - - - - usage: show_transfer <txid> - - - - - Transaction ID not found - - - - - true - - - - - failed to parse refresh type - - - - - - wallet is watch-only and has no seed - - - - - - wallet is non-deterministic and has no seed - - - - - - wallet is watch-only and cannot transfer - - - - - - - mixin must be an integer >= 2 - - - - - could not change default mixin - - - - - could not change default priority + + Error: failed to estimate backlog array size: - Synchronize transactions and balance - - - - - incoming_transfers [available|unavailable] - Show incoming transfers, all or filtered by availability - - - - - payments <PID_1> [<PID_2> ... <PID_N>] - Show payments for given payment ID[s] - - - - - transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) - - - - - locked_transfer [<mixin_count>] <addr> <amount> <lockblocks>(Number of blocks to lock the transaction for, max 1000000) [<payment_id>] - - - - - Send all unmixable outputs to yourself with mixin 0 + Error: bad estimated backlog array size - Sign a transaction from a file + (current) - - Submit a signed transaction from a file + + %u block (%u minutes) backlog at priority %u%s - - integrated_address [PID] - Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID - - - - - Save wallet data - - - - - Save a watch-only keys file + + %u to %u block (%u to %u minutes) backlog at priority %u - Display private view key + No backlog at priority - - Display private spend key - - - - - Display Electrum-style mnemonic seed - - - - - Available options: seed language - set wallet seed language; always-confirm-transfers <1|0> - whether to confirm unsplit txes; print-ring-members <1|0> - whether to print detailed information about ring members during confirmation; store-tx-info <1|0> - whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference; default-mixin <n> - set default mixin (default is 4); auto-refresh <1|0> - whether to automatically sync new blocks from the daemon; refresh-type <full|optimize-coinbase|no-coinbase|default> - set wallet refresh behaviour; priority [0|1|2|3|4] - default/unimportant/normal/elevated/priority fee; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - set default monero (sub-)unit; min-outputs-count [n] - try to keep at least that many outputs of value at least min-outputs-value; min-outputs-value [n] - try to keep at least min-outputs-count outputs of at least that value; merge-destinations <1|0> - whether to merge multiple payments to the same destination address - - - - - Rescan blockchain for spent outputs - - - - - Get transaction key (r) for a given <txid> - - - - - Check amount going to <address> in <txid> - - - - - Generate a signature to prove payment to <address> in <txid> using the transaction secret key (r) without revealing it - - - - - Check tx proof for payment going to <address> in <txid> - - - - - unspent_outputs [<min_amount> <max_amount>] - Show unspent outputs within an optional amount range - - - - - Rescan blockchain from scratch - - - - - Set an arbitrary string note for a txid - - - - - Get a string note for a txid + + + This wallet is already multisig - Show wallet status information - - - - - Sign the contents of a file - - - - - Verify a signature on the contents of a file - - - - - Export a signed set of key images - - - - - Import signed key images list and verify their spent status - - - - - Export a set of outputs owned by this wallet + + wallet is watch-only and cannot be made multisig - Import set of outputs owned by this wallet + + This wallet has been used before, please use a new wallet to create a multisig wallet - - full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) + + Your password is incorrect. - - monero, millinero, micronero, nanonero, piconero + + Send this multisig info to all other participants, then use make_multisig <threshold> <info1> [<info2>...] with others' multisig info - - Wallet name not valid. Please try again or use Ctrl-C to quit. + + This includes the PRIVATE view key, so needs to be disclosed only to that multisig wallet's participants + + + + + usage: make_multisig <threshold> <multisiginfo1> [<multisiginfo2>...] + + + + + Invalid threshold + + + + + Another step is needed + + + + + Send this multisig info to all other participants, then use finalize_multisig <info1> [<info2>...] with others' multisig info + + + + + Error creating multisig: + + + + + Error creating multisig: new wallet is not multisig + + + + + multisig address: + + + + + + + This wallet is not multisig + + + + + This wallet is already finalized + + + + + usage: finalize_multisig <multisiginfo1> [<multisiginfo2>...] + + + + + Failed to finalize multisig - Wallet and key files found, loading... + Failed to finalize multisig: - - Key file found but not wallet file. Regenerating... + + + + + + This multisig wallet is not yet finalized - - Key file not found. Failed to open wallet: + + usage: export_multisig_info <filename> - - Generating new wallet... + + Error exporting multisig info: + + + + + Multisig info exported to - can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-json="jsonfilename" and --generate-from-keys="wallet_name" + usage: import_multisig_info <filename1> [<filename2>...] - one for each other participant - - can't specify both --restore-deterministic-wallet and --non-deterministic + + Multisig info imported - - Electrum-style word list failed verification + + Failed to import multisig info: - - - - - - No data supplied, cancelled + + Failed to update spent status after importing multisig info: - - - - - - - - - - failed to parse address - - - - - - failed to parse view key secret key - - - - - - failed to verify view key secret key - - - - - - view key does not match standard address - - - - - - - account creation failed + + Untrusted daemon, spent status may be incorrect. Use a trusted daemon and run "rescan_spent" + - failed to parse spend key secret key + + This is not a multisig wallet - - failed to verify spend key secret key + + usage: sign_multisig <filename> + + + + + Failed to sign multisig transaction + + + + + Multisig error: + + + + + Failed to sign multisig transaction: + + + + + It may be relayed to the network with submit_multisig + + + + + usage: submit_multisig <filename> + + + + + + Failed to load multisig transaction from file - spend key does not match standard address + + Multisig transaction signed by only %u signers, needs %u more signatures - - failed to open account + + + Transaction successfully submitted, transaction + + + + + + You can check its status by using the `show_transfers` command. + + + + + usage: export_raw_multisig <filename> + + + + + Failed to export multisig transaction to file + + + + + Saved exported multisig transaction file(s): + + + + + + + ring size must be an integer >= + + + + + could not change default ring size + + + + + Invalid height + + + + + start_mining [<number_of_threads>] [bg_mining] [ignore_battery] + + + + + Start mining in the daemon (bg_mining and ignore_battery are optional booleans). + + + + + Stop mining in the daemon. + + + + + set_daemon <host>[:<port>] + + + + + Set another daemon to connect to. + + + + + Save the current blockchain data. + + + + + Synchronize the transactions and balance. + + + + + balance [detail] + + + + + Show the wallet's balance of the currently selected account. + + + + + incoming_transfers [available|unavailable] [verbose] [index=<N1>[,<N2>[,...]]] + + + + + Show the incoming transfers, all or filtered by availability and address index. + + + + + payments <PID_1> [<PID_2> ... <PID_N>] + + + + + Show the payments for the given payment IDs. + + + + + Show the blockchain height. + + + + + transfer_original [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] + + + + + Transfer <amount> to <address> using an older transaction building algorithm. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] + + + + + Transfer <amount> to <address>. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + locked_transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <addr> <amount> <lockblocks> [<payment_id>] + + + + + Transfer <amount> to <address> and lock it for <lockblocks> (max. 1000000). If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + Send all unmixable outputs to yourself with ring_size 1 + + + + + sweep_all [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] + + + + + Send all unlocked balance to an address. If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. + + + + + sweep_below <amount_threshold> [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] + + + + + Send all unlocked outputs below the threshold to an address. + + + + + sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] + + + + + Send a single output of the given key image to an address without change. + + + + + donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] + + + + + Donate <amount> to the development team (donate.getmonero.org). + + + + + sign_transfer <file> - - - - - wallet is null + Sign a transaction from a <file>. - - Daemon either is not started or wrong port was passed. Please make sure daemon is running or restart the wallet with the correct daemon address. + + Submit a signed transaction from a file. - - - invalid language choice entered. Please try again. - + + set_log <level>|{+,-,}<categories> - - View key: + + Change the current log detail (level must be <0-4>). - + + account + account new <label text with white spaces allowed> + account switch <index> + account label <index> <label text with white spaces allowed> + account tag <tag_name> <account_index_1> [<account_index_2> ...] + account untag <account_index_1> [<account_index_2> ...] + account tag_description <tag_name> <description> + + + + + If no arguments are specified, the wallet shows all the existing accounts along with their balances. +If the "new" argument is specified, the wallet creates a new account with its label initialized by the provided label text (which can be empty). +If the "switch" argument is specified, the wallet switches to the account specified by <index>. +If the "label" argument is specified, the wallet sets the label of the account specified by <index> to the provided label text. +If the "tag" argument is specified, a tag <tag_name> is assigned to the specified accounts <account_index_1>, <account_index_2>, .... +If the "untag" argument is specified, the tags assigned to the specified accounts <account_index_1>, <account_index_2> ..., are removed. +If the "tag_description" argument is specified, the tag <tag_name> is assigned an arbitrary text <description>. + + + + + address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed>] + + + + + If no arguments are specified or <index> is specified, the wallet shows the default or specified address. If "all" is specified, the walllet shows all the existing addresses in the currently selected account. If "new " is specified, the wallet creates a new address with the provided label text (which can be empty). If "label" is specified, the wallet sets the label of the address specified by <index> to the provided label text. + + + + + integrated_address [<payment_id> | <address>] + + + + + Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID + + + + + address_book [(add ((<address> [pid <id>])|<integrated address>) [<description possibly with whitespaces>])|(delete <index>)] + + + + + Print all entries in the address book, optionally adding/deleting an entry to/from it. + + + + + Save the wallet data. + + + + + Save a watch-only keys file. + + + + + Display the private view key. + + + + + Display the private spend key. + + + + + Display the Electrum-style mnemonic seed + + + + + set <option> [<value>] + + + + + Available options: + seed language + Set the wallet's seed language. + always-confirm-transfers <1|0> + Whether to confirm unsplit txes. + print-ring-members <1|0> + Whether to print detailed information about ring members during confirmation. + store-tx-info <1|0> + Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference. + default-ring-size <n> + Set the default ring size (default and minimum is 5). + auto-refresh <1|0> + Whether to automatically synchronize new blocks from the daemon. + refresh-type <full|optimize-coinbase|no-coinbase|default> + Set the wallet's refresh behaviour. + priority [0|1|2|3|4] + Set the fee too default/unimportant/normal/elevated/priority. + confirm-missing-payment-id <1|0> + ask-password <1|0> + unit <monero|millinero|micronero|nanonero|piconero> + Set the default monero (sub-)unit. + min-outputs-count [n] + Try to keep at least that many outputs of value at least min-outputs-value. + min-outputs-value [n] + Try to keep at least min-outputs-count outputs of at least that value. + merge-destinations <1|0> + Whether to merge multiple payments to the same destination address. + confirm-backlog <1|0> + Whether to warn if there is transaction backlog. + confirm-backlog-threshold [n] + Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks. + refresh-from-block-height [n] + Set the height before which to ignore blocks. + auto-low-priority <1|0> + Whether to automatically use the low priority fee level when it's safe to do so. + + + + + Display the encrypted Electrum-style mnemonic seed. + + + + + Rescan the blockchain for spent outputs. + + + + + get_tx_key <txid> + + + + + Get the transaction key (r) for a given <txid>. + + + + + check_tx_key <txid> <txkey> <address> + + + + + Check the amount going to <address> in <txid>. + + + + + get_tx_proof <txid> <address> [<message>] + + + + + Generate a signature proving funds sent to <address> in <txid>, optionally with a challenge string <message>, using either the transaction secret key (when <address> is not your wallet's address) or the view secret key (otherwise), which does not disclose the secret key. + + + + + check_tx_proof <txid> <address> <signature_file> [<message>] + + + + + Check the proof for funds going to <address> in <txid> with the challenge string <message> if any. + + + + + get_spend_proof <txid> [<message>] + + + + + Generate a signature proving that you generated <txid> using the spend secret key, optionally with a challenge string <message>. + + + + + check_spend_proof <txid> <signature_file> [<message>] + + + + + Check a signature proving that the signer generated <txid>, optionally with a challenge string <message>. + + + + + get_reserve_proof (all|<amount>) [<message>] + + + + + Generate a signature proving that you own at least this much, optionally with a challenge string <message>. +If 'all' is specified, you prove the entire sum of all of your existing accounts' balances. +Otherwise, you prove the reserve of the smallest possible amount above <amount> available in your current account. + + + + + check_reserve_proof <address> <signature_file> [<message>] + + + + + Check a signature proving that the owner of <address> holds at least this much, optionally with a challenge string <message>. + + + + + show_transfers [in|out|pending|failed|pool] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] + + + + + Show the incoming/outgoing transfers within an optional height range. + + + + + unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] + + + + + Show the unspent outputs of a specified address within an optional amount range. + + + + + Rescan the blockchain from scratch. + + + + + set_tx_note <txid> [free text note] + + + + + Set an arbitrary string note for a <txid>. + + + + + get_tx_note <txid> + + + + + Get a string note for a txid. + + + + + set_description [free text note] + + + + + Set an arbitrary description for the wallet. + + + + + Get the description of the wallet. + + + + + Show the wallet's status. + + + + + Show the wallet's information. + + + + + sign <file> + + + + + Sign the contents of a file. + + + + + verify <filename> <address> <signature> + + + + + Verify a signature on the contents of a file. + + + + + export_key_images <file> + + + + + Export a signed set of key images to a <file>. + + + + + import_key_images <file> + + + + + Import a signed key images list and verify their spent status. + + + + + export_outputs <file> + + + + + Export a set of outputs owned by this wallet. + + + + + import_outputs <file> + + + + + Import a set of outputs owned by this wallet. + + + + + show_transfer <txid> + + + + + Show information about a transfer to/from this address. + + + + + Change the wallet's password. + + + + + Generate a new random full size payment id. These will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids. + + + + + Print the information about the current fee and transaction backlog. + + + + + Export data needed to create a multisig wallet + + + + + make_multisig <threshold> <string1> [<string>...] + + + + + Turn this wallet into a multisig wallet + + + + + finalize_multisig <string> [<string>...] + + + + + Turn this wallet into a multisig wallet, extra step for N-1/N wallets + + + + + export_multisig_info <filename> + + + + + Export multisig info for other participants + + + + + import_multisig_info <filename> [<filename>...] + + + + + Import multisig info from other participants + + + + + sign_multisig <filename> + + + + + Sign a multisig transaction from a file + + + + + submit_multisig <filename> + + + + + Submit a signed multisig transaction from a file + + + + + export_raw_multisig_tx <filename> + + + + + Export a signed multisig transaction to a file + + + + + help [<command>] + + + + + Show the help section or the documentation about a <command>. + + + + + integer >= + + + + + block height + + + + + No wallet found with that name. Confirm creation of new wallet named: + + + + + can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-spend-key="wallet_name", --generate-from-keys="wallet_name", --generate-from-multisig-keys="wallet_name" and --generate-from-json="jsonfilename" + + + + + can't specify both --restore-deterministic-wallet or --restore-multisig-wallet and --non-deterministic + + + + + --restore-multisig-wallet uses --generate-new-wallet, not --wallet-file + + + + + specify a recovery parameter with the --electrum-seed="multisig seed here" + + + + + Multisig seed failed verification + + + + + Enter seed encryption passphrase, empty if none + + + + + + This address is a subaddress which cannot be used here. + + + + + Error: expected M/N, but got: + + + + + Error: expected N > 1 and N <= M, but got: + + + + + Error: M/N is currently unsupported. + + + + + Generating master wallet from %u of %u multisig wallet keys + + + + + failed to parse secret view key + + + + + failed to verify secret view key + + + + + Secret spend key (%u of %u): + + + + + Error: M/N is currently unsupported + + + + + Restore height + + + + + Still apply restore height? (Y/Yes/N/No): + + + + + Warning: using an untrusted daemon at %s, privacy will be lessened + + + + + Daemon either is not started or wrong port was passed. Please make sure daemon is running or change the daemon address using the 'set_daemon' command. + + + + Your wallet has been generated! To start synchronizing with the daemon, use the "refresh" command. Use the "help" command to see the list of available commands. +Use "help <command>" to see a command's documentation. Always use the "exit" command when closing monero-wallet-cli to save your current session's state. Otherwise, you might need to synchronize your wallet again (your wallet keys are NOT at risk in any case). @@ -1633,965 +2155,1718 @@ your wallet again (your wallet keys are NOT at risk in any case). - - You may want to remove the file "%s" and try again + + failed to generate new mutlisig wallet - - failed to deinitialize wallet + + Generated new %u/%u multisig wallet: - - - this command requires a trusted daemon. Enable with --trusted-daemon + + Opened %u/%u multisig wallet%s - - blockchain can't be saved: + + Use "help <command>" to see a command's documentation. + - - - - - - daemon is busy. Please try again later. - - - - - - - - - no connection to daemon. Please make sure daemon is running. - - - - - refresh error: - - - - - Balance: - - - - - pubkey - - - - - key image - - - - - - unlocked - - - - - ringct - - - - - T - - - - - F - - - - - locked - - - - - RingCT - - - - - - - - - - - payment ID has invalid format, expected 16 or 64 character hex string: - - - - - failed to get spent status - - - - - the same transaction - - - - - blocks that are temporally very close - - - - - Locked blocks too high, max 1000000 (˜4 yrs) - - - - - usage: get_tx_proof <txid> <dest_address> [<tx_key>] - - - - - failed to parse tx_key - - - - - Tx secret key was found for the given txid, but you've also provided another tx secret key which doesn't match the found one. - - - - - Tx secret key wasn't found in the wallet file. Provide it as the optional third parameter if you have it elsewhere. - - - - - Signature: - - - - - usage: check_tx_proof <txid> <address> <signature> - - - - - Signature header check error - - - - - - - Signature decoding error - - - - - Tx pubkey was not found - - - - - Good signature - - - - - Bad signature - - - - - failed to generate key derivation - - - - - usage: integrated_address [payment ID] - - - - - Integrated address: account %s, payment ID %s - - - - - Standard address: - - - - - failed to parse payment ID or address - - - - - usage: address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] - - - - - failed to parse payment ID - - - - - failed to parse index - - - - - Address book is empty. - - - - - Index: - - - - - Address: - - - - - Payment ID: - - - - - Description: - - - - - usage: set_tx_note [txid] free text note - - - - - usage: get_tx_note [txid] - - - - - usage: sign <filename> - - - - - wallet is watch-only and cannot sign - - - - - - - failed to read file - - - - - usage: verify <filename> <address> <signature> - - - - - Bad signature from - - - - - Good signature from - - - - - usage: export_key_images <filename> - - - - - wallet is watch-only and cannot export key images - - - - - - failed to save file - - - - - Signed key images exported to - - - - - usage: import_key_images <filename> - - - - - usage: export_outputs <filename> - - - - - Outputs exported to - - - - - usage: import_outputs <filename> - - - - - - amount is wrong: - - - - - - expected number from 0 to - - - - - Money successfully sent, transaction - - - - - no connection to daemon. Please, make sure daemon is running. - - - - - - - - not enough outputs for specified mixin_count - - - - - - - - output amount - - - - - - - - found outputs to mix - - - - - - - - transaction was not constructed - - - - - - - - transaction %s was rejected by daemon with status: - - - - - - - - one of destinations is zero - - - - - Failed to find a suitable way to split transactions - - - - - - - - unknown transfer error: - - - - - Sweeping - - - - - Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No) - - - - - - - Money successfully sent, transaction: - - - - - Change goes to more than one address - - - - - %s change to %s - - - - - no change + + wallet is multisig and cannot save a watch-only version - Transaction successfully signed to file + missing daemon URL argument - - usage: get_tx_key <txid> + + Unexpected array length - Exited simple_wallet::set_daemon() - - - - - - - - failed to parse txid + + This does not seem to be a valid daemon URL. - - Tx key: + + + txid - - no tx keys found for this txid + + + idx + + + + + (Some owned outputs have partial key images - import_multisig_info needed) + + + + + Currently selected account: [ + + + + + ] + + + + + Tag: + + + + + (No tag assigned) + + + + + Balance per address: + + + + + Address + + + + + + Balance + + + + + + Unlocked balance + + + + + Outputs + + + + + + Label + + + + + %8u %6s %21s %21s %7u %21s + + + + + usage: balance [detail] - usage: check_tx_key <txid> <txkey> <address> - - - - - - failed to parse tx key + + usage: incoming_transfers [available|unavailable] [verbose] [index=<N>] - - failed to get transaction from daemon + spent - - - failed to parse transaction from daemon + + global index - - - failed to validate transaction from daemon + + tx id + + + + + + addr index - - failed to get the right transaction from daemon + No incoming transfers - - failed to generate key derivation from supplied parameters + + No incoming available transfers - - error: + + No incoming unavailable transfers - - received + + expected at least one payment ID - - in txid + + payment - - received nothing in txid + + transaction + + + + + height + + + + + unlock time + + + + + No payments with id + + + + + + + failed to get blockchain height: + + + + + + + + + failed to connect to the daemon + + + + + +Transaction %llu/%llu: txid=%s + + + + + +Input %llu/%llu: amount=%s + + + + + failed to get output: + + + + + output key's originating block height shouldn't be higher than the blockchain height + + + + + +Originating block heights: + + + + + +| + + + + + + | + + + + + + +Warning: Some input keys being spent are from + + + + + , which can break the anonymity of ring signature. Make sure this is intentional! + + + + + + Ring size must not be 0 + + + + + + ring size %u is too small, minimum is %u + + + + + wrong number of arguments + + + + + + + No payment id is included with this transaction. Is this okay? (Y/Yes/N/No): + + + + + + No outputs found, or daemon is not ready + + + + + Transaction successfully saved to + + + + + + , txid + + + + + Failed to save transaction to + + + + + + Sweeping %s in %llu transactions for a total fee of %s. Is this okay? (Y/Yes/N/No): + + + + + + + Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No): + + + + + Donating + + + + + This is a watch only wallet + + + + + usage: show_transfer <txid> + + + + + Double spend seen on the network: this transaction may or may not end up being mined + + + + + Transaction ID not found + + + + + true + + + + + failed to parse refresh type + + + + + + wallet is watch-only and has no seed + + + + + + wallet is non-deterministic and has no seed + + + + + + wallet is watch-only and cannot transfer + + + + + could not change default priority + + + + + full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) + + + + + monero, millinero, micronero, nanonero, piconero + + + + + Wallet name not valid. Please try again or use Ctrl-C to quit. + + + + + Wallet and key files found, loading... + + + + + Key file found but not wallet file. Regenerating... + + + + + Key file not found. Failed to open wallet: + + + + + Generating new wallet... + + + + + Electrum-style word list failed verification + + + + + + + + + + + + + + No data supplied, cancelled + + + + + + + + + + + + + + + + failed to parse address + + + + + + failed to parse view key secret key + + + + + + failed to verify view key secret key + + + + + + + view key does not match standard address + + + + + + + + + account creation failed + + + + + + + failed to parse spend key secret key + + + + + + failed to verify spend key secret key + + + + + + spend key does not match standard address + + + + + failed to open account + + + + + + + + + wallet is null + + + + + + invalid language choice entered. Please try again. + + + + + + View key: + + + + + You may want to remove the file "%s" and try again + + + + + failed to deinitialize wallet + + + + + + + this command requires a trusted daemon. Enable with --trusted-daemon + + + + + blockchain can't be saved: + + + + + + daemon is busy. Please try again later. + + + + + + no connection to daemon. Please make sure daemon is running. + + + + + refresh error: + + + + + Balance: + + + + + pubkey + + + + + key image + + + + + + unlocked + + + + + ringct + + + + + T + + + + + F + + + + + locked + + + + + RingCT + + + + + - - WARNING: this transaction is not yet included in the blockchain! + payment ID has invalid format, expected 16 or 64 character hex string: - - This transaction has %u confirmations - - - - - WARNING: failed to determine number of confirmations! + + failed to get spent status - usage: show_transfers [in|out|all|pending|failed] [<min_height> [<max_height>]] + the same transaction - + + blocks that are temporally very close + + + + + Locked blocks too high, max 1000000 (˜4 yrs) + + + + + + Good signature + + + + + + + Bad signature + + + + + usage: integrated_address [payment ID] + + + + + Standard address: + + + + + failed to parse payment ID or address + + + + + usage: address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] + + + + + failed to parse payment ID + + + + + failed to parse index + + + + + Address book is empty. + + + + + Index: + + + + + + Address: + + + + + Payment ID: + + + + + + Description: + + + + + usage: set_tx_note [txid] free text note + + + + + usage: get_tx_note [txid] + + + + + usage: sign <filename> + + + + + wallet is watch-only and cannot sign + + + + + + + + failed to read file + + + + + usage: check_tx_proof <txid> <address> <signature_file> [<message>] + + + + + + + failed to load signature file + + + + + usage: get_spend_proof <txid> [<message>] + + + + + wallet is watch-only and cannot generate the proof + + + + + usage: check_spend_proof <txid> <signature_file> [<message>] + + + + + usage: get_reserve_proof (all|<amount>) [<message>] + + + + + The reserve proof can be generated only by a full wallet + + + + + usage: check_reserve_proof <address> <signature_file> [<message>] + + + + + Address must not be a subaddress + + + + + Good signature -- total: %s, spent: %s, unspent: %s + + + + + usage: show_transfers [in|out|all|pending|failed] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] + + + + + [Double spend seen on the network: this transaction may or may not end up being mined] + + + + + usage: unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] + + + + + There is no unspent output in the specified address + + + + + (no daemon) + + + + + (out of sync) + + + + + (Untitled account) + + + + + + + + + + failed to parse index: + + + + + + specify an index between 0 and + + + + + usage: + account + account new <label text with white spaces allowed> + account switch <index> + account label <index> <label text with white spaces allowed> + account tag <tag_name> <account_index_1> [<account_index_2> ...] + account untag <account_index_1> [<account_index_2> ...] + account tag_description <tag_name> <description> + + + + + +Grand total: + Balance: + + + + + , unlocked balance: + + + + + Untagged accounts: + + + + + Tag %s is unregistered. + + + + + Accounts with tag: + + + + + Tag's description: + + + + + Account + + + + + %c%8u %6s %21s %21s %21s + + + + + ---------------------------------------------------------------------------------- + + + + + %15s %21s %21s + + + + + Primary address + + + + + (used) + + + + + (Untitled address) + + + + + <index_min> is already out of bound + + + + + <index_max> exceeds the bound + + + + + usage: address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed> ] + + + + + + Integrated addresses can only be created for account 0 + + + + + Integrated address: %s, payment ID: %s + + + + + Subaddress: + + + + + usage: get_description + + + + + no description found + + + + + description found: + + + + + Filename: + + + + + Watch only + + + + + %u/%u multisig%s + + + + + Normal + + + + + Type: + + + + + Testnet: + + + + + Yes + + + + + No + + + + + This wallet is multisig and cannot sign + + + + + usage: verify <filename> <address> <signature> + + + + + Bad signature from + + + + + Good signature from + + + + + usage: export_key_images <filename> + + + + + wallet is watch-only and cannot export key images + + + + + + + failed to save file + + + + + Signed key images exported to + + + + + usage: import_key_images <filename> + + + + + usage: export_outputs <filename> + + + + + Outputs exported to + + + + + usage: import_outputs <filename> + + + + + + + + amount is wrong: + + + + + expected number from 0 to + + + + + Sweeping + + + + + Money successfully sent, transaction: + + + + + Change goes to more than one address + + + + + %s change to %s + + + + + no change + + + + + + + Transaction successfully signed to file + + + + + usage: get_tx_key <txid> + + + + + + + + + + + + + failed to parse txid + + + + + Tx key: + + + + + no tx keys found for this txid + + + + + usage: get_tx_proof <txid> <address> [<message>] + + + + + + + signature file saved to: + + + + + + + failed to save signature file + + + + + usage: check_tx_key <txid> <txkey> <address> + + + + + + failed to parse tx key + + + + + + + error: + + + + + + received + + + + + + in txid + + + + + + received nothing in txid + + + + + + WARNING: this transaction is not yet included in the blockchain! + + + + + + This transaction has %u confirmations + + + + + + WARNING: failed to determine number of confirmations! + + + + bad min_height parameter: - + bad max_height parameter: - + in - - + + out - + failed - + pending - - usage: unspent_outputs [<min_amount> <max_amount>] - - - - + <min_amount> should be smaller than <max_amount> - + Amount: - + , number of keys: - + - + Min block height: - + Max block height: - + Min amount found: - + Max amount found: - + Total count: - + Bin size: - + Outputs per *: - + count ^ - + | - + + - + +--> block height - + ^ - + ^ - + - + wallet - - + + Random payment ID: - + Matching integrated address: + + genms + + + Base filename (-1, -2, etc suffixes will be appended as needed) + + + + + Give threshold and participants at once as M/N + + + + + How many participants wil share parts of the multisig wallet + + + + + How many signers are required to sign a valid transaction + + + + + Create testnet multisig wallets + + + + + Generating %u %u/%u multisig wallets + + + + + Error verifying multisig extra info + + + + + Error finalizing multisig + + + + + Generated multisig wallets for address + + + + + Error creating multisig wallets: + + + + + This program generates a set of multisig wallets - use this simpler scheme only if all the participants trust each other + + + + + Error: expected N/M, but got: + + + + + + Error: either --scheme or both of --threshold and --participants may be given + + + + + Error: expected N > 1 and N <= M, but got N==%u and M==%d + + + + + Error: --filename-base is required + + + + + Error: unsupported scheme: only N/N and N-1/N are supported + + + sw - + Generate new wallet and save it to <arg> - + Generate incoming-only wallet from view key + + + Generate deterministic wallet from spend key + + Generate wallet from private keys - - Specify Electrum seed for wallet recovery/creation + + Generate a master wallet from multisig wallet keys - Recover wallet using Electrum-style mnemonic seed + Language for mnemonic - Generate non-deterministic view and spend keys + Specify Electrum seed for wallet recovery/creation - Enable commands which rely on a trusted daemon + Recover wallet using Electrum-style mnemonic seed - Allow communicating with a daemon that uses a different RPC version + Recover multisig wallet using Electrum-style mnemonic seed + Generate non-deterministic view and spend keys + + + + + Enable commands which rely on a trusted daemon + + + + + Allow communicating with a daemon that uses a different RPC version + + + + Restore from specific blockchain height - + + The newly created transaction will not be relayed to the monero network + + + + daemon is busy. Please try again later. - + possibly lost connection to daemon - + Error: - + + This is the command line monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Failed to initialize wallet - - tools::dns_utils - - - DNSSEC validation passed - - - - - WARNING: DNSSEC validation was unsuccessful, this address may not be correct! - - - - - For URL: - - - - - Monero Address = - - - - - Is this OK? (Y/n) - - - - - you have cancelled the transfer request - - - tools::wallet2 - + Use daemon instance at <host>:<port> - + Use daemon instance at host <arg> instead of localhost - - Wallet password - - - - + Wallet password file - + Use daemon instance at port <arg> instead of 18081 - + For testnet. Daemon must also be launched with --testnet flag - + Restricts to view-only commands - + can't specify daemon host or port more than once - + can't specify more than one of --password and --password-file - + the password file specified could not be read - - Enter new password for the wallet - - - - - failed to read wallet password - - - - + Failed to load file - + Wallet password (escape/quote as needed) - + Specify username[:password] for daemon RPC client - + + no password specified; use --prompt-for-password to prompt for a password + + + + Failed to parse JSON - + Version %u too new, we can only grok up to %u - + failed to parse view key secret key - - - + + + failed to verify view key secret key - + failed to parse spend key secret key - - - + + + failed to verify spend key secret key - + Electrum-style word list failed verification - - At least one of Electrum-style word list and private view key must be specified + + At least one of Electrum-style word list and private view key and private spend key must be specified - + Both Electrum-style word list and private key(s) specified - + invalid address - + view key does not match standard address - + spend key does not match standard address - + Cannot generate deprecated wallets from JSON - + + failed to parse address: + + + + + Address must be specified in order to create watch-only wallet + + + + failed to generate new wallet: - + + + + + + + + + Primary account + + + + + No funds received in this tx. + + + + failed to read file @@ -2599,94 +3874,125 @@ Outputs per *: tools::wallet_rpc_server - + Daemon is local, assuming trusted - + + Failed to create directory + + + + + Failed to create directory %s: %s + + + + Cannot specify -- - + and -- - + Failed to create file - + . Check permissions or remove file - + Error writing to file - + RPC username/password is stored in file - + + Tag %s is unregistered. + + + + + Transaction not possible. Available only %s, transaction amount %s = %s + %s (fee) + + + + + This is the RPC monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Can't specify more than one of --wallet-file and --generate-from-json - + Must specify --wallet-file or --generate-from-json or --wallet-dir - + Loading wallet... - - + + Saving wallet... - - - Saved ok + + + Successfully saved - - Loaded ok + + Successfully loaded - + Wallet initialization failed: - + Failed to initialize wallet RPC server - + Starting wallet RPC server - + + Failed to run wallet: + + + + Stopped wallet RPC server - + Failed to save wallet: @@ -2694,58 +4000,65 @@ Outputs per *: wallet_args - - + + + Wallet options - + Generate wallet from JSON format file - + Use wallet <arg> - + Max number of threads to use for a parallel job - + Specify log file - + Config file - + General options - + + This is the command line monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Can't find config file - + Logging to: - + Logging to %s - + Usage: diff --git a/translations/monero_fr.ts b/translations/monero_fr.ts index c4e9a0f36..37d7d5928 100644 --- a/translations/monero_fr.ts +++ b/translations/monero_fr.ts @@ -4,24 +4,24 @@ Monero::AddressBookImpl - + Invalid destination address Adresse de destination invalide - + Invalid payment ID. Short payment ID should only be used in an integrated address ID de paiement invalide. L'identifiant de paiement court devrait seulement être utilisé dans une adresse intégrée - + Invalid payment ID ID de paiement invalide - - Integrated address and long payment id can't be used at the same time - Une adresse intégrée et un identifiant de paiement long ne peuvent pas être utilisés en même temps + + Integrated address and long payment ID can't be used at the same time + @@ -37,32 +37,32 @@ Échec de l'écriture de(s) transaction(s) dans le fichier - + daemon is busy. Please try again later. le démon est occupé. Veuillez réessayer plus tard. - + no connection to daemon. Please make sure daemon is running. pas de connexion au démon. Veuillez vous assurer que le démon fonctionne. - + transaction %s was rejected by daemon with status: la transaction %s a été rejetée par le démon avec le statut : - + . Reason: . Raison : - + Unknown exception: Exception inconnue : - + Unhandled exception Exception non gérée @@ -81,323 +81,324 @@ Échec de signature de transaction - + Claimed change does not go to a paid address La monnaie réclamée ne va pas à une adresse payée - + Claimed change is larger than payment to the change address La monnaie réclamée est supérieure au paiement à l'adresse de monnaie - + Change goes to more than one address La monnaie rendue va à plus d'une adresse - + sending %s to %s envoi de %s à %s - + with no destinations sans destination - + %s change to %s %s de monnaie rendue à %s - + no change sans monnaie rendue - - Loaded %lu transactions, for %s, fee %s, %s, %s, with min mixin %lu. %s - %lu transactions chargées, pour %s, %s de frais, %s, %s, avec mixin minimum de %lu, %s + + Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu. %s + Monero::WalletImpl - + payment id has invalid format, expected 16 or 64 character hex string: format d'identifiant de paiement invalide, 16 ou 64 caractères hexadécimaux attendus : - + Failed to add short payment id: Échec de l'ajout de l'ID de paiement court : - - + + daemon is busy. Please try again later. le démon est occupé. Veuillez réessayer plus tard. - - + + no connection to daemon. Please make sure daemon is running. pas de connexion au démon. Veuillez vous assurer que le démon fonctionne. - - + + RPC error: Erreur RPC : - + + + not enough outputs for specified ring size + + + + + + found outputs to use + + + + + Please sweep unmixable outputs. + + + + failed to get random outputs to mix échec de la récupération de sorties aléatoires à mélanger - - + + not enough money to transfer, available only %s, sent amount %s pas assez de fonds pour le transfert, montant disponible %s, montant envoyé %s - + failed to parse address échec de l'analyse de l'adresse - + failed to parse secret spend key échec de l'analyse de la clé secrète de dépense - + No view key supplied, cancelled Pas de clé d'audit fournie, annulation - + failed to parse secret view key échec de l'analyse de la clé secrète d'audit - + failed to verify secret spend key échec de la vérification de la clé secrète de dépense - + spend key does not match address la clé de dépense ne correspond pas à l'adresse - + failed to verify secret view key échec de la vérification de la clé secrète d'audit - + view key does not match address la clé d'audit ne correspond pas à l'adresse - + failed to generate new wallet: échec de la génération du nouveau portefeuille : - + + Failed to send import wallet request + + + + Failed to load unsigned transactions Échec du chargement des transaction non signées - + Failed to load transaction from file Échec du chargement de la transaction du fichier - + Wallet is view only Portefeuille d'audit uniquement - + failed to save file échec de l'enregistrement du fichier - + + Key images can only be imported with a trusted daemon + + + + Failed to import key images: Échec de l'importation des images de clé : - + + Failed to get subaddress label: + + + + + Failed to set subaddress label: + + + + failed to get random outputs to mix: %s échec de la récupération de sorties aléatoires à mélanger : %s - - + + + not enough money to transfer, overall balance only %s, sent amount %s + + + + + not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee) pas assez de fonds pour le transfert, montant disponible %s, montant envoyé %s = %s + %s (frais) - - - not enough outputs for specified mixin_count - pas assez de sorties pour le mixin spécifié - - - - + + output amount montant de la sortie - - - found outputs to mix - sorties à mélanger trouvées - - - - + + transaction was not constructed la transaction n'a pas été construite - - + + transaction %s was rejected by daemon with status: la transaction %s a été rejetée par le démon avec le statut : - - + + one of destinations is zero une des destinations est zéro - - + + failed to find a suitable way to split transactions échec de la recherche d'une façon adéquate de scinder les transactions - - + + unknown transfer error: erreur de transfert inconnue : - - + + internal error: erreur interne : - - + + unexpected error: erreur inattendue : - - + + unknown error erreur inconnue - + + + + + + + Failed to parse txid + + + + + no tx keys found for this txid + aucune clé de transaction trouvée pour cet ID de transaction + + + + + Failed to parse tx key + + + + + + + + Failed to parse address + Échec de l'analyse de l'adresse + + + + Address must not be a subaddress + + + + Rescan spent can only be used with a trusted daemon Réexaminer les dépenses ne peut se faire qu'avec un démon de confiance - - Monero::WalletManagerImpl - - - failed to parse txid - échec de l'analyse de l'ID de transaction - - - - - failed to parse tx key - échec de l'analyse de la clé de transaction - - - - failed to parse address - échec de l'analyse de l'adresse - - - - failed to get transaction from daemon - échec de la récupération de la transaction du démon - - - - failed to parse transaction from daemon - échec de l'analyse de la transaction du démon - - - - failed to validate transaction from daemon - échec de la validation de la transaction du démon - - - - failed to get the right transaction from daemon - échec de la récupération de la bonne transaction du démon - - - - failed to generate key derivation from supplied parameters - échec de la génération de la dérivation de clé à partir des paramètres fournis - - - - error: - erreur : - - - - received - a reçu - - - - in txid - dans la transaction - - - - received nothing in txid - n'a rien reçu dans la transaction - - Wallet - + Failed to parse address Échec de l'analyse de l'adresse - + Failed to parse key Échec de l'analyse de la clé - + failed to verify key Échec de la vérification de la clé - + key does not match address la clé ne correspond pas à l'adresse @@ -405,1931 +406,3081 @@ command_line - + yes oui + + + no + + cryptonote::rpc_args - + Specify IP to bind RPC server Spécifier l'IP à laquelle lier le serveur RPC - + Specify username[:password] required for RPC server Spécifier le nom_utilisateur[:mot_de_passe] requis pour le serveur RPC - + Confirm rpc-bind-ip value is NOT a loopback (local) IP Confirmer que la valeur de rpc-bind-ip n'est PAS une IP de bouclage (locale) - + + Specify a comma separated list of origins to allow cross origin resource sharing + + + + Invalid IP address given for -- Adresse IP invalide fournie pour -- - + permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with -- autorise les connexions entrantes non cryptées venant de l'extérieur. Considérez plutôt un tunnel SSH ou un proxy SSL. Outrepasser avec -- - + Username specified with -- Le nom d'utilisateur spécifié avec -- - + + cannot be empty ne peut pas être vide + + + requires RFC server password -- + + cryptonote::simple_wallet - + Commands: Commandes : - + failed to read wallet password échec de la lecture du mot de passe du portefeuille - + invalid password mot de passe invalide - - start_mining [<number_of_threads>] - Start mining in daemon - start_mining [<nombre_de_threads>] - Démarrer l'extraction minière dans le démon - - - - Stop mining in daemon - Stopper l'extraction minière dans le démon - - - - Save current blockchain data - Sauvegarder les données actuelles de la chaîne de blocs - - - - Show current wallet balance - Afficher le solde actuel du portefeuille - - - - Show blockchain height - Afficher la hauteur de la chaîne de blocs - - - - Show current wallet public address - Afficher l'adresse publique du portefeuille actuel - - - - Show this help - Afficher cette aide - - - + set seed: needs an argument. available options: language set seed : requiert un argument. options disponibles : language - + set: unrecognized argument(s) set : argument(s) non reconnu(s) - + wallet file path not valid: chemin du fichier portefeuille non valide : - + Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting. Tentative de génération ou de restauration d'un portefeuille, mais le fichier spécifié existe déjà. Sortie pour ne pas risquer de l'écraser. - + usage: payment_id usage : payment_id - - sweep_below <amount_threshold> [mixin] address [] - Send all unlocked outputs below the threshold to an address - sweep_below <montant_seuil> [mixin] adresse [] - Envoyer toutes les sorties débloquées sous le seuil vers une adresse - - - Available options: seed language - set wallet seed language; always-confirm-transfers <1|0> - whether to confirm unsplit txes; print-ring-members <1|0> - whether to print detailed information about ring members during confirmation; store-tx-info <1|0> - whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference; default-mixin <n> - set default mixin (default is 4); auto-refresh <1|0> - whether to automatically sync new blocks from the daemon; refresh-type <full|optimize-coinbase|no-coinbase|default> - set wallet refresh behaviour; priority [0|1|2|3|4] - default/unimportant/normal/elevated/priority fee; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - set default monero (sub-)unit; min-outputs-count [n] - try to keep at least that many outputs of value at least min-outputs-value; min-outputs-value [n] - try to keep at least min-outputs-count outputs of at least that value - merge-destinations <1|0> - whether to merge multiple payments to the same destination address - Options disponibles : seed language - définir la langue de la graine du portefeuille; always-confirm-transfers <1|0> - confirmer ou non les transactions non scindées; print-ring-members <1|0> - afficher ou non des informations détaillées sur les membres du cercle pendant la confirmation; store-tx-info <1|0> - sauvegarder ou non les informations des transactions sortantes (adresse de destination, ID de paiement, clé secrète de transaction) pour référence future; default-mixin <n> - définir le mixin par défaut (4 par défaut); auto-refresh <1|0> - synchroniser automatiquement ou non les nouveau blocs du démon; refresh-type <full|optimize-coinbase|no-coinbase|default> - définir le comportement du rafraîchissement du portefeuille; priority [0|1|2|3|4] - frais de transaction par défault/peu important/normal/élevé/prioritaire; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - définir la (sous-)unité monero par défaut; min-outputs-count [n] - essayer de garder au moins ce nombre de sortie d'une valeur d'au moins min-outputs-value; min-outputs-value [n] - essayer de garder au moins min-outputs-count sorties d'une valeur d'au moins ce montant; merge-destinations <1|0> - fusionner ou non de multiples paiements à une même adresse de destination - - - - Generate a new random full size payment id - these will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids - Générer un nouvel ID de paiement long aléatoire - ceux-ci seront non cryptés dans la chaîne de blocs, voir integrated_address pour les IDs de paiement courts cryptés - - - + needs an argument requiert un argument - - - - - - - + + + + + + + + + + 0 or 1 0 ou 1 - - integer >= 2 - entier >= 2 - - - + 0, 1, 2, 3, or 4 0, 1, 2, 3 ou 4 - monero, millinero, micronero, nanop, piconero - monero, millinero, micronero, nanonero, piconero - - - + + unsigned integer entier non signé - + NOTE: the following 25 words can be used to recover access to your wallet. Write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control. VEUILLEZ NOTER : les 25 mots suivants peuvent être utilisés pour restaurer votre portefeuille. Veuillez les écrire sur papier et les garder dans un endroit sûr. Ne les gardez pas dans un courriel ou dans un service de stockage de fichiers hors de votre contrôle. - + --restore-deterministic-wallet uses --generate-new-wallet, not --wallet-file --restore-deterministic-wallet utilise --generate-new-wallet, pas --wallet-file - + specify a recovery parameter with the --electrum-seed="words list here" spécifiez un paramètre de récupération avec --electrum-seed="liste de mots ici" - + specify a wallet path with --generate-new-wallet (not --wallet-file) spécifiez un chemin de portefeuille avec --generate-new-wallet (pas --wallet-file) - + wallet failed to connect to daemon: échec de la connexion du portefeuille au démon : - + Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version. Le démon utilise une version majeure de RPC (%u) différente de celle du portefeuille (%u) : %s. Mettez l'un des deux à jour, ou utilisez --allow-mismatched-daemon-version. - + List of available languages for your wallet's seed: Liste des langues disponibles pour la graine de votre portefeuille : - + Enter the number corresponding to the language of your choice: Entrez le nombre correspondant à la langue de votre choix : - + You had been using a deprecated version of the wallet. Please use the new seed that we provide. Vous avez utilisé une version obsolète du portefeuille. Veuillez dorénavant utiliser la nouvelle graine que nous fournissons. - - + + Generated new wallet: Nouveau portefeuille généré : - - + + + failed to generate new wallet: échec de la génération du nouveau portefeuille : - + Opened watch-only wallet Ouverture du portefeuille d'audit - + Opened wallet Ouverture du portefeuille - + You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet. Vous avez utilisé une version obsolète du portefeuille. Veuillez procéder à la mise à jour de votre portefeuille. - + You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now. Vous avez utilisé une version obsolète du portefeuille. Le format de votre fichier portefeuille est en cours de mise à jour. - + failed to load wallet: échec du chargement du portefeuille : - + Use the "help" command to see the list of available commands. Utilisez la commande "help" pour voir la liste des commandes disponibles. - + Wallet data saved Données du portefeuille sauvegardées - + Mining started in daemon L'extraction minière dans le démon a démarré - + mining has NOT been started: l'extraction minière n'a PAS démarré : - + Mining stopped in daemon L'extraction minière dans le démon a été stoppée - + mining has NOT been stopped: l'extraction minière n'a PAS été stoppée : - + Blockchain saved Chaîne de blocs sauvegardée - - - + + + Height Hauteur - - - + transaction transaction - - received - reçu - - - + spent dépensé - + unsupported transaction format format de transaction non supporté - + Starting refresh... Démarrage du rafraîchissement... - + Refresh done, blocks received: Rafraîchissement effectué, blocs reçus : - - + + payment id has invalid format, expected 16 or 64 character hex string: format d'identifiant de paiement invalide, 16 ou 64 caractères hexadécimaux attendus : - + bad locked_blocks parameter: mauvais paramètre locked_blocks : - Locked blocks too high, max 1000000 (˜4 yrs) - - Blocs vérrouillés trop élevé, 1000000 maximum (Ë - 4 ans) - - - - - + + + a single transaction cannot use more than one payment id: une unique transaction ne peut pas utiliser plus d'un ID de paiement : - - + + + + failed to set up payment id, though it was decoded correctly échec de la définition de l'ID de paiement, bien qu'il ait été décodé correctement - - - - - + + + + + + + + transaction cancelled. transaction annulée. - + + + Is this okay anyway? (Y/Yes/N/No): + + + + + There is currently a %u block backlog at that fee level. Is this okay? (Y/Yes/N/No): + + + + + Failed to check for backlog: + + + + + + +Transaction + + + + + + Spending from address index %d + + + + + + + WARNING: Outputs of multiple addresses are being used together, which might potentially compromise your privacy. + + + + + Sending %s. Envoi de %s. - + Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s Votre transaction doit être scindée en %llu transactions. Il en résulte que des frais de transaction doivent être appliqués à chaque transaction, pour un total de %s - + The transaction fee is %s Les frais de transaction sont de %s - + , of which %s is dust from change , dont %s est de la poussière de monnaie rendue - + . . - + A total of %s from dust change will be sent to dust address Un total de %s de poussière de monnaie rendue sera envoyé à une adresse de poussière - + . This transaction will unlock on block %llu, in approximately %s days (assuming 2 minutes per block) . Cette transaction sera déverrouillée au bloc %llu, dans approximativement %s jours (en supposant 2 minutes par bloc) - - - + + + + + + + + Failed to write transaction(s) to file Échec de l'écriture de(s) transaction(s) dans le fichier - - - + + + + + + + + Unsigned transaction(s) successfully written to file: Transaction(s) non signée(s) écrite(s) dans le fichier avec succès : - - - - - Not enough money in unlocked balance - Pas assez de fonds dans le solde débloqué - - - - - - - Failed to find a way to create transactions. This is usually due to dust which is so small it cannot pay for itself in fees, or trying to send more money than the unlocked balance, or not leaving enough for fees - Échec de la recherche d'une façon de créer les transactions. Ceci est généralement dû à de la poussière si petite qu'elle de peut pas payer ses propre frais, à une tentative d'envoi d'un montant supérieur au solde débloqué, ou parce qu'il n'en reste pas assez pour les frais de transaction - - - - - - Reason: - Raison : - - - - - - failed to find a suitable way to split transactions - échec de la recherche d'une façon adéquate de scinder les transactions - - - + No unmixable outputs found Aucune sortie non mélangeable trouvée - + No address given Aucune adresse fournie - + + failed to parse Payment ID + + + + + usage: sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] + + + + + failed to parse key image + + + + + No outputs found + + + + + Multiple transactions are created, which is not supposed to happen + + + + + The transaction uses multiple or no inputs, which is not supposed to happen + + + + missing threshold amount montant seuil manquant - + invalid amount threshold montant seuil invalide - + + donations are not enabled on the testnet + + + + + usage: donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] + + + + Claimed change does not go to a paid address La monnaie réclamée ne va pas à une adresse payée - + Claimed change is larger than payment to the change address La monnaie réclamée est supérieure au paiement à l'adresse de monnaie - + sending %s to %s envoi de %s à %s - + + dummy output(s) + + + + with no destinations sans destination - + + Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu, %s. %sIs this okay? (Y/Yes/N/No): + + + + + This is a multisig wallet, it can only sign with sign_multisig + + + + + usage: sign_transfer [export] + + + + Failed to sign transaction Échec de signature de transaction - + Failed to sign transaction: Échec de signature de transaction : - + + Transaction raw hex data exported to + + + + Failed to load transaction from file Échec du chargement de la transaction du fichier - - daemon is busy. Please try again later - le démon est occupé. Veuillez réessayer plus tard - - - - - - - - + + RPC error: Erreur RPC : - + wallet is watch-only and has no spend key c'est un portefeuille d'audit et il n'a pas de clé de dépense - + + + Your original password was incorrect. Votre mot de passe original est incorrect. - + Error with wallet rewrite: Erreur avec la réécriture du portefeuille : - + priority must be 0, 1, 2, 3, or 4 la priorité doit être 0, 1, 2, 3 ou 4 - + + priority must be 0, 1, 2, 3, or 4 la priorité doit être 0, 1, 2, 3 ou 4 - - priority must be 0, 1, 2, 3, or 4 - la priorité doit être 0, 1, 2, 3 ou 4 - - - + invalid unit unité invalide - + + invalid count: must be an unsigned integer nombre invalide : un entier non signé est attendu - + invalid value valeur invalide - - Same as transfer, but using an older transaction building algorithm - Comme transfer, mais utilise an algorithme de construction de transaction plus ancien - - - - sweep_all [mixin] address [] - Send all unlocked balance to an address - sweep_all [mixin] adresse [] - Envoyer tout le solde débloqué à une adresse - - - - donate [<mixin_count>] <amount> [payment_id] - Donate <amount> to the development team (donate.getmonero.org) - donate [<mixin>] <montant> [ID_paiement] - Donner <montant> à l'équipe de développement (donate.getmonero.org) - - - - set_log <level>|<categories> - Change current log detail (level must be <0-4>) - set_log <niveau>|<catégories> - Changer les détails du journal (niveau entre <0-4>) - - - - address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] - Print all entries in the address book, optionally adding/deleting an entry to/from it - address_book [(add (<adresse> [pid <ID de paiement long ou court>])|<adresse integrée> [<description avec des espaces possible>])|(delete <index>)] - Afficher toutes les entrées du carnet d'adresses, éventuellement en y ajoutant/supprimant une entrée - - - - show_transfers [in|out|pending|failed|pool] [<min_height> [<max_height>]] - Show incoming/outgoing transfers within an optional height range - show_transfers [in|out|pending|failed|pool] [<hauteur_minimum> [<hauteur_maximum>]] - Afficher les transferts entrants/sortants en précisant éventuellement un intervalle de hauteurs - - - unspent_outputs [<min_amount> <max_amount>] - Show unspent outputs within an optional amount range) - unspent_outputs [<montant_minimum> <montant_maximum>] - Afficher les sorties non dépensées en précisant éventuellement un intervalle de montants - - - - Show information about a transfer to/from this address - Afficher les informations à propos d'un transfert vers/de cette adresse - - - - Change wallet password - Changer le mot de passe du portefeuille - - - + usage: set_log <log_level_number_0-4> | <categories> usage : set_log <niveau_de_journalisation_0-4> | <catégories> - + (Y/Yes/N/No): (Y/Yes/Oui/N/No/Non) : - - + + bad m_restore_height parameter: mauvais paramètre m_restore_height : - + date format must be YYYY-MM-DD le format de date doit être AAAA-MM-JJ - + Restore height is: La hauteur de restauration est : - - + + Is this okay? (Y/Yes/N/No): Est-ce correct ? (Y/Yes/Oui/N/No/Non) : - + Daemon is local, assuming trusted Le démon est local, supposons qu'il est de confiance - + Password for new watch-only wallet Mot de passe pour le nouveau portefeuille d'audit - + invalid arguments. Please use start_mining [<number_of_threads>] [do_bg_mining] [ignore_battery], <number_of_threads> should be from 1 to arguments invalides. Veuillez utiliser start_mining [<nombre_de_threads>] [mine_en_arrière_plan] [ignorer_batterie], <nombre_de_threads> devrait être entre 1 et - - - - - + internal error: erreur interne : - - - - - - + + + unexpected error: erreur inattendue : - - - - - - + + + + + + + + + unknown error erreur inconnue - + refresh failed: échec du rafraîchissement : - + Blocks received: Blocs reçus : - + unlocked balance: solde débloqué : - - - + + + amount montant - + + false + + + + + Unknown command: + + + + + Command usage: + + + + + Command description: + + + + + wallet is multisig but not yet finalized + + + + + Enter optional seed encryption passphrase, empty to see raw seed + + + + + Failed to retrieve seed + + + + + wallet is multisig and has no seed + + + + + Cannot connect to daemon + + + + + Current fee is %s monero per kB + + + + + Error: failed to estimate backlog array size: + + + + + Error: bad estimated backlog array size + + + + + (current) + + + + + %u block (%u minutes) backlog at priority %u%s + + + + + %u to %u block (%u to %u minutes) backlog at priority %u + + + + + No backlog at priority + + + + + + This wallet is already multisig + + + + + + wallet is watch-only and cannot be made multisig + + + + + + This wallet has been used before, please use a new wallet to create a multisig wallet + + + + + Your password is incorrect. + + + + + Send this multisig info to all other participants, then use make_multisig <threshold> <info1> [<info2>...] with others' multisig info + + + + + This includes the PRIVATE view key, so needs to be disclosed only to that multisig wallet's participants + + + + + usage: make_multisig <threshold> <multisiginfo1> [<multisiginfo2>...] + + + + + Invalid threshold + + + + + Another step is needed + + + + + Send this multisig info to all other participants, then use finalize_multisig <info1> [<info2>...] with others' multisig info + + + + + Error creating multisig: + + + + + Error creating multisig: new wallet is not multisig + + + + + multisig address: + + + + + + + This wallet is not multisig + + + + + This wallet is already finalized + + + + + usage: finalize_multisig <multisiginfo1> [<multisiginfo2>...] + + + + + Failed to finalize multisig + + + + + Failed to finalize multisig: + + + + + + + + + This multisig wallet is not yet finalized + + + + + usage: export_multisig_info <filename> + + + + + Error exporting multisig info: + + + + + Multisig info exported to + + + + + usage: import_multisig_info <filename1> [<filename2>...] - one for each other participant + + + + + Multisig info imported + + + + + Failed to import multisig info: + + + + + Failed to update spent status after importing multisig info: + + + + + Untrusted daemon, spent status may be incorrect. Use a trusted daemon and run "rescan_spent" + + + + + + + This is not a multisig wallet + + + + + usage: sign_multisig <filename> + + + + + Failed to sign multisig transaction + + + + + Multisig error: + + + + + Failed to sign multisig transaction: + + + + + It may be relayed to the network with submit_multisig + + + + + usage: submit_multisig <filename> + + + + + + Failed to load multisig transaction from file + + + + + + Multisig transaction signed by only %u signers, needs %u more signatures + + + + + + Transaction successfully submitted, transaction + + + + + + You can check its status by using the `show_transfers` command. + + + + + usage: export_raw_multisig <filename> + + + + + Failed to export multisig transaction to file + + + + + Saved exported multisig transaction file(s): + + + + + + + ring size must be an integer >= + + + + + could not change default ring size + + + + + Invalid height + + + + + start_mining [<number_of_threads>] [bg_mining] [ignore_battery] + + + + + Start mining in the daemon (bg_mining and ignore_battery are optional booleans). + + + + + Stop mining in the daemon. + + + + + set_daemon <host>[:<port>] + + + + + Set another daemon to connect to. + + + + + Save the current blockchain data. + + + + + Synchronize the transactions and balance. + + + + + balance [detail] + + + + + Show the wallet's balance of the currently selected account. + + + + + incoming_transfers [available|unavailable] [verbose] [index=<N1>[,<N2>[,...]]] + + + + + Show the incoming transfers, all or filtered by availability and address index. + + + + + payments <PID_1> [<PID_2> ... <PID_N>] + + + + + Show the payments for the given payment IDs. + + + + + Show the blockchain height. + + + + + transfer_original [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] + + + + + Transfer <amount> to <address> using an older transaction building algorithm. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] + + + + + Transfer <amount> to <address>. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + locked_transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <addr> <amount> <lockblocks> [<payment_id>] + + + + + Transfer <amount> to <address> and lock it for <lockblocks> (max. 1000000). If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + Send all unmixable outputs to yourself with ring_size 1 + + + + + sweep_all [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] + + + + + Send all unlocked balance to an address. If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. + + + + + sweep_below <amount_threshold> [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] + + + + + Send all unlocked outputs below the threshold to an address. + + + + + sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] + + + + + Send a single output of the given key image to an address without change. + + + + + donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] + + + + + Donate <amount> to the development team (donate.getmonero.org). + + + + + sign_transfer <file> + + + + + Sign a transaction from a <file>. + + + + + Submit a signed transaction from a file. + + + + + set_log <level>|{+,-,}<categories> + + + + + Change the current log detail (level must be <0-4>). + + + + + account + account new <label text with white spaces allowed> + account switch <index> + account label <index> <label text with white spaces allowed> + account tag <tag_name> <account_index_1> [<account_index_2> ...] + account untag <account_index_1> [<account_index_2> ...] + account tag_description <tag_name> <description> + + + + + If no arguments are specified, the wallet shows all the existing accounts along with their balances. +If the "new" argument is specified, the wallet creates a new account with its label initialized by the provided label text (which can be empty). +If the "switch" argument is specified, the wallet switches to the account specified by <index>. +If the "label" argument is specified, the wallet sets the label of the account specified by <index> to the provided label text. +If the "tag" argument is specified, a tag <tag_name> is assigned to the specified accounts <account_index_1>, <account_index_2>, .... +If the "untag" argument is specified, the tags assigned to the specified accounts <account_index_1>, <account_index_2> ..., are removed. +If the "tag_description" argument is specified, the tag <tag_name> is assigned an arbitrary text <description>. + + + + + address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed>] + + + + + If no arguments are specified or <index> is specified, the wallet shows the default or specified address. If "all" is specified, the walllet shows all the existing addresses in the currently selected account. If "new " is specified, the wallet creates a new address with the provided label text (which can be empty). If "label" is specified, the wallet sets the label of the address specified by <index> to the provided label text. + + + + + integrated_address [<payment_id> | <address>] + + + + + Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID + + + + + address_book [(add ((<address> [pid <id>])|<integrated address>) [<description possibly with whitespaces>])|(delete <index>)] + + + + + Print all entries in the address book, optionally adding/deleting an entry to/from it. + + + + + Save the wallet data. + + + + + Save a watch-only keys file. + + + + + Display the private view key. + + + + + Display the private spend key. + + + + + Display the Electrum-style mnemonic seed + + + + + set <option> [<value>] + + + + + Available options: + seed language + Set the wallet's seed language. + always-confirm-transfers <1|0> + Whether to confirm unsplit txes. + print-ring-members <1|0> + Whether to print detailed information about ring members during confirmation. + store-tx-info <1|0> + Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference. + default-ring-size <n> + Set the default ring size (default and minimum is 5). + auto-refresh <1|0> + Whether to automatically synchronize new blocks from the daemon. + refresh-type <full|optimize-coinbase|no-coinbase|default> + Set the wallet's refresh behaviour. + priority [0|1|2|3|4] + Set the fee too default/unimportant/normal/elevated/priority. + confirm-missing-payment-id <1|0> + ask-password <1|0> + unit <monero|millinero|micronero|nanonero|piconero> + Set the default monero (sub-)unit. + min-outputs-count [n] + Try to keep at least that many outputs of value at least min-outputs-value. + min-outputs-value [n] + Try to keep at least min-outputs-count outputs of at least that value. + merge-destinations <1|0> + Whether to merge multiple payments to the same destination address. + confirm-backlog <1|0> + Whether to warn if there is transaction backlog. + confirm-backlog-threshold [n] + Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks. + refresh-from-block-height [n] + Set the height before which to ignore blocks. + auto-low-priority <1|0> + Whether to automatically use the low priority fee level when it's safe to do so. + + + + + Display the encrypted Electrum-style mnemonic seed. + + + + + Rescan the blockchain for spent outputs. + + + + + get_tx_key <txid> + + + + + Get the transaction key (r) for a given <txid>. + + + + + check_tx_key <txid> <txkey> <address> + + + + + Check the amount going to <address> in <txid>. + + + + + get_tx_proof <txid> <address> [<message>] + + + + + Generate a signature proving funds sent to <address> in <txid>, optionally with a challenge string <message>, using either the transaction secret key (when <address> is not your wallet's address) or the view secret key (otherwise), which does not disclose the secret key. + + + + + check_tx_proof <txid> <address> <signature_file> [<message>] + + + + + Check the proof for funds going to <address> in <txid> with the challenge string <message> if any. + + + + + get_spend_proof <txid> [<message>] + + + + + Generate a signature proving that you generated <txid> using the spend secret key, optionally with a challenge string <message>. + + + + + check_spend_proof <txid> <signature_file> [<message>] + + + + + Check a signature proving that the signer generated <txid>, optionally with a challenge string <message>. + + + + + get_reserve_proof (all|<amount>) [<message>] + + + + + Generate a signature proving that you own at least this much, optionally with a challenge string <message>. +If 'all' is specified, you prove the entire sum of all of your existing accounts' balances. +Otherwise, you prove the reserve of the smallest possible amount above <amount> available in your current account. + + + + + check_reserve_proof <address> <signature_file> [<message>] + + + + + Check a signature proving that the owner of <address> holds at least this much, optionally with a challenge string <message>. + + + + + show_transfers [in|out|pending|failed|pool] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] + + + + + Show the incoming/outgoing transfers within an optional height range. + + + + + unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] + + + + + Show the unspent outputs of a specified address within an optional amount range. + + + + + Rescan the blockchain from scratch. + + + + + set_tx_note <txid> [free text note] + + + + + Set an arbitrary string note for a <txid>. + + + + + get_tx_note <txid> + + + + + Get a string note for a txid. + + + + + set_description [free text note] + + + + + Set an arbitrary description for the wallet. + + + + + Get the description of the wallet. + + + + + Show the wallet's status. + + + + + Show the wallet's information. + + + + + sign <file> + + + + + Sign the contents of a file. + + + + + verify <filename> <address> <signature> + + + + + Verify a signature on the contents of a file. + + + + + export_key_images <file> + + + + + Export a signed set of key images to a <file>. + + + + + import_key_images <file> + + + + + Import a signed key images list and verify their spent status. + + + + + export_outputs <file> + + + + + Export a set of outputs owned by this wallet. + + + + + import_outputs <file> + + + + + Import a set of outputs owned by this wallet. + + + + + show_transfer <txid> + + + + + Show information about a transfer to/from this address. + + + + + Change the wallet's password. + + + + + Generate a new random full size payment id. These will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids. + + + + + Print the information about the current fee and transaction backlog. + + + + + Export data needed to create a multisig wallet + + + + + make_multisig <threshold> <string1> [<string>...] + + + + + Turn this wallet into a multisig wallet + + + + + finalize_multisig <string> [<string>...] + + + + + Turn this wallet into a multisig wallet, extra step for N-1/N wallets + + + + + export_multisig_info <filename> + + + + + Export multisig info for other participants + + + + + import_multisig_info <filename> [<filename>...] + + + + + Import multisig info from other participants + + + + + sign_multisig <filename> + + + + + Sign a multisig transaction from a file + + + + + submit_multisig <filename> + + + + + Submit a signed multisig transaction from a file + + + + + export_raw_multisig_tx <filename> + + + + + Export a signed multisig transaction to a file + + + + + help [<command>] + + + + + Show the help section or the documentation about a <command>. + + + + + integer >= + + + + + block height + + + + + No wallet found with that name. Confirm creation of new wallet named: + + + + + can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-spend-key="wallet_name", --generate-from-keys="wallet_name", --generate-from-multisig-keys="wallet_name" and --generate-from-json="jsonfilename" + + + + + can't specify both --restore-deterministic-wallet or --restore-multisig-wallet and --non-deterministic + + + + + --restore-multisig-wallet uses --generate-new-wallet, not --wallet-file + + + + + specify a recovery parameter with the --electrum-seed="multisig seed here" + + + + + Multisig seed failed verification + + + + + Enter seed encryption passphrase, empty if none + + + + + + This address is a subaddress which cannot be used here. + + + + + Error: expected M/N, but got: + + + + + Error: expected N > 1 and N <= M, but got: + + + + + Error: M/N is currently unsupported. + + + + + Generating master wallet from %u of %u multisig wallet keys + + + + + failed to parse secret view key + échec de l'analyse de la clé secrète d'audit + + + + failed to verify secret view key + échec de la vérification de la clé secrète d'audit + + + + Secret spend key (%u of %u): + + + + + Error: M/N is currently unsupported + + + + + Restore height + + + + + Still apply restore height? (Y/Yes/N/No): + + + + + Warning: using an untrusted daemon at %s, privacy will be lessened + + + + + Daemon either is not started or wrong port was passed. Please make sure daemon is running or change the daemon address using the 'set_daemon' command. + + + + + Your wallet has been generated! +To start synchronizing with the daemon, use the "refresh" command. +Use the "help" command to see the list of available commands. +Use "help <command>" to see a command's documentation. +Always use the "exit" command when closing monero-wallet-cli to save +your current session's state. Otherwise, you might need to synchronize +your wallet again (your wallet keys are NOT at risk in any case). + + + + + + failed to generate new mutlisig wallet + + + + + Generated new %u/%u multisig wallet: + + + + + Opened %u/%u multisig wallet%s + + + + + Use "help <command>" to see a command's documentation. + + + + + + wallet is multisig and cannot save a watch-only version + + + + + missing daemon URL argument + + + + + Unexpected array length - Exited simple_wallet::set_daemon() + + + + + This does not seem to be a valid daemon URL. + + + + + + txid + + + + + + idx + + + + + (Some owned outputs have partial key images - import_multisig_info needed) + + + + + Currently selected account: [ + + + + + ] + + + + + Tag: + + + + + (No tag assigned) + + + + + Balance per address: + + + + + Address + + + + + + Balance + + + + + + Unlocked balance + + + + + Outputs + + + + + + Label + + + + + %8u %6s %21s %21s %7u %21s + + + + + usage: balance [detail] + + + + + + usage: incoming_transfers [available|unavailable] [verbose] [index=<N>] + + + + spent dépensé - + global index index global - + tx id ID de transaction - + + + addr index + + + + No incoming transfers Aucun transfert entrant - + No incoming available transfers Aucun transfert entrant disponible - + No incoming unavailable transfers Aucun transfert entrant non disponible - + expected at least one payment ID au moins un ID de paiement attendu - + payment paiement - + transaction transaction - + height hauteur - + unlock time durée de déverrouillage - + No payments with id Aucun paiement avec l'ID - - - + + + failed to get blockchain height: échec de la récupération de la hauteur de la chaîne de blocs : - + + + + + failed to connect to the daemon échec de la connexion au démon - + Transaction %llu/%llu: txid=%s Transaction %llu/%llu : ID=%s - + Input %llu/%llu: amount=%s Entrée %llu/%llu : montant=%s - + failed to get output: échec de la récupération de la sortie : - + output key's originating block height shouldn't be higher than the blockchain height la hauteur du bloc d'origine de la clé de la sortie ne devrait pas être supérieure à celle de la chaîne de blocs - + Originating block heights: Hauteurs des blocs d'origine : - + | | - - + + | | - + Warning: Some input keys being spent are from Attention : Certaines clés d'entrées étant dépensées sont issues de - + , which can break the anonymity of ring signature. Make sure this is intentional! , ce qui peut casser l'anonymat du cercle de signature. Assurez-vous que c'est intentionnel ! - - + + + Ring size must not be 0 + + + + + + ring size %u is too small, minimum is %u + + + + wrong number of arguments mauvais nombre d'arguments - - + + + No payment id is included with this transaction. Is this okay? (Y/Yes/N/No): Aucun ID de paiement n'est inclus dans cette transaction. Est-ce correct ? (Y/Yes/Oui/N/No/Non) : - - + + No outputs found, or daemon is not ready Aucune sortie trouvée, ou le démon n'est pas prêt - - - - - failed to get random outputs to mix: - échec de la récupération de sorties aléatoires à mélanger : + + Transaction successfully saved to + - - + + + , txid + + + + + Failed to save transaction to + + + + + Sweeping %s in %llu transactions for a total fee of %s. Is this okay? (Y/Yes/N/No): Balayage de %s dans %llu transactions pour des frais totaux de %s. Est-ce correct ? (Y/Yes/Oui/N/No/Non) : - + + + Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No): Balayage de %s pour des frais totaux de %s. Est-ce correct ? (Y/Yes/Oui/N/No/Non) : - + Donating Don de - - Loaded %lu transactions, for %s, fee %s, %s, %s, with min mixin %lu. %sIs this okay? (Y/Yes/N/No): - Chargement de %lu transactions, pour %s, %s de frais, %s. %s, avec mixin minimum de %lu. %sEst-ce correct ? (Y/Yes/Oui/N/No/Non) : - - - + This is a watch only wallet Ceci est un portefeuille d'audit - + usage: show_transfer <txid> usage : show_transfer <ID_de_transaction> - + + Double spend seen on the network: this transaction may or may not end up being mined + + + + Transaction ID not found ID de transaction non trouvé - + true vrai - + failed to parse refresh type échec de l'analyse du type de rafraîchissement - - + + wallet is watch-only and has no seed c'est un portefeuille d'audit et il n'a pas de graine - - + + wallet is non-deterministic and has no seed c'est un portefeuille non déterministe et il n'a pas de graine - - + + wallet is watch-only and cannot transfer c'est un portefeuille d'audit et il ne peut pas transférer - - - - mixin must be an integer >= 2 - mixin doit être un entier >= 2 - - - - could not change default mixin - échec du changement du mixin par défaut - - - + could not change default priority échec du changement de la priorité par défaut - - Synchronize transactions and balance - Synchroniser les transactions et le solde - - - - incoming_transfers [available|unavailable] - Show incoming transfers, all or filtered by availability - incoming_transfers [available|unavailable] - Afficher les transferts entrants, soit tous soit filtrés par disponibilité - - - - payments <PID_1> [<PID_2> ... <PID_N>] - Show payments for given payment ID[s] - payments <PID_1> [<PID_2> ... <PID_N>] - Affichier les paiements pour certains ID de paiement donnés - - - - transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) - transfer [<priorité>] [<mixin>] <adresse> <montant> [<ID_paiement>] - Transférer <montant> à <adresse>. <priorité> est la priorité de la transaction. Plus la priorité est élevée, plues les frais de transaction seront élévés. Les valeurs de priorité valies sont dans l'ordre (de la plus basse à la plus élevée) : unimportant, normal, elevated, priority. Si ce paramètre est omis, la valeur par défaut (voir la commande "set priority") est utilisée. <mixin> est le nombre d'entrées supplémentaires à inclure pour l'intraçabilité. De multiples paiements peuvent être effectués d'un coup en ajoutant <adresse_2> <montant_2> et cetera (avant l'ID de paiement, s'il est inclus) - - - - locked_transfer [<mixin_count>] <addr> <amount> <lockblocks>(Number of blocks to lock the transaction for, max 1000000) [<payment_id>] - locked_transfer [<mixin>] <adresse> <montant> <blocs_vérrous>(Nombre de blocs pendant lequel vérrouiller la transaction, maximum 1000000) [<ID_paiement>] - - - - Send all unmixable outputs to yourself with mixin 0 - Envoyer toutes les sorties non méleangeables à vous-même avec un mixin de 0 - - - - Sign a transaction from a file - Signer une transaction d'un fichier - - - - Submit a signed transaction from a file - Soumettre une transaction signée d'un fichier - - - - integrated_address [PID] - Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID - integrated_address [PID] - Encoder un ID de paiement dans une adresse intégrée pour l'adresse publique du portefeuille actuel (sans argument un ID de paiement aléatoire est utilisé), ou décoder une adresse intégrée en une adresse standard et un ID de paiement - - - - Save wallet data - Sauvegarder les données du portefeuille - - - - Save a watch-only keys file - Sauvegarder un fichier de clés d'audit - - - - Display private view key - Afficher la clé privée d'audit - - - - Display private spend key - Afficher la clé privée de dépense - - - - Display Electrum-style mnemonic seed - Afficher la graine mnémonique de style Electrum - - - - Available options: seed language - set wallet seed language; always-confirm-transfers <1|0> - whether to confirm unsplit txes; print-ring-members <1|0> - whether to print detailed information about ring members during confirmation; store-tx-info <1|0> - whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference; default-mixin <n> - set default mixin (default is 4); auto-refresh <1|0> - whether to automatically sync new blocks from the daemon; refresh-type <full|optimize-coinbase|no-coinbase|default> - set wallet refresh behaviour; priority [0|1|2|3|4] - default/unimportant/normal/elevated/priority fee; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - set default monero (sub-)unit; min-outputs-count [n] - try to keep at least that many outputs of value at least min-outputs-value; min-outputs-value [n] - try to keep at least min-outputs-count outputs of at least that value; merge-destinations <1|0> - whether to merge multiple payments to the same destination address - Options disponibles : seed language - définir la langue de la graine du portefeuille; always-confirm-transfers <1|0> - confirmer ou non les transactions non scindées; print-ring-members <1|0> - afficher ou non des informations détaillées sur les membres du cercle pendant la confirmation; store-tx-info <1|0> - sauvegarder ou non les informations des transactions sortantes (adresse de destination, ID de paiement, clé secrète de transaction) pour référence future; default-mixin <n> - définir le mixin par défaut (4 par défaut); auto-refresh <1|0> - synchroniser automatiquement ou non les nouveau blocs du démon; refresh-type <full|optimize-coinbase|no-coinbase|default> - définir le comportement du rafraîchissement du portefeuille; priority [0|1|2|3|4] - frais de transaction par défault/peu important/normal/élevé/prioritaire; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - définir la (sous-)unité monero par défaut; min-outputs-count [n] - essayer de garder au moins ce nombre de sortie d'une valeur d'au moins min-outputs-value; min-outputs-value [n] - essayer de garder au moins min-outputs-count sorties d'une valeur d'au moins ce montant; merge-destinations <1|0> - fusionner ou non de multiples paiements à une même adresse de destination - - - - Rescan blockchain for spent outputs - Réexaminer la chaîne de blocs pour trouver les sorties dépensées - - - - Get transaction key (r) for a given <txid> - Obtenir la clé de transaction (r) pour un <ID_de_transaction> donné - - - - Check amount going to <address> in <txid> - Vérifier le montant allant à <adresse> dans <ID_de_transaction> - - - - Generate a signature to prove payment to <address> in <txid> using the transaction secret key (r) without revealing it - - - - - Check tx proof for payment going to <address> in <txid> - - - - - unspent_outputs [<min_amount> <max_amount>] - Show unspent outputs within an optional amount range - unspent_outputs [<montant_minimum> <montant_maximum>] - Afficher les sorties non dépensées en précisant éventuellement un intervalle de montants - - - - Rescan blockchain from scratch - Réexaminer la chaîne de blocs depuis le début - - - - Set an arbitrary string note for a txid - Définir une note arbitraire pour un ID de transaction - - - - Get a string note for a txid - Obtenir une note pour un ID de transaction - - - - Show wallet status information - Afficher les informations sur le statut du portefuille - - - - Sign the contents of a file - Signer le contenu d'un fichier - - - - Verify a signature on the contents of a file - Vérifier une signature du contenu d'un fichier - - - - Export a signed set of key images - Exporter un ensemble signé d'images de clé - - - - Import signed key images list and verify their spent status - Importer un ensemble signé d'images de clé et vérifier leurs statuts de dépense - - - - Export a set of outputs owned by this wallet - Exporter un ensemble de sorties possédées par ce portefeuille - - - - Import set of outputs owned by this wallet - Importer un ensemble de sorties possédées par ce portefeuille - - - + full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) full (le plus lent, aucune supposition); optimize-coinbase (rapide, suppose que la récompense de bloc est payée à une unique adresse); no-coinbase (le plus rapide, suppose que l'on ne reçoit aucune récompense de bloc), default (comme optimize-coinbase) - + monero, millinero, micronero, nanonero, piconero monero, millinero, micronero, nanonero, piconero - + Wallet name not valid. Please try again or use Ctrl-C to quit. Nom de portefeuille non valide. Veuillez réessayer ou utilisez Ctrl-C pour quitter. - + Wallet and key files found, loading... Fichier portefeuille et fichier de clés trouvés, chargement... - + Key file found but not wallet file. Regenerating... Fichier de clés trouvé mais pas le fichier portefeuille. Régénération... - + Key file not found. Failed to open wallet: Fichier de clés non trouvé. Échec de l'ouverture du portefeuille : - + Generating new wallet... Génération du nouveau portefeuille... - - can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-json="jsonfilename" and --generate-from-keys="wallet_name" - impossible de spécifier plus d'une option parmis --generate-new-wallet="nom_du_portefeuille", --wallet-file="nom_du_portefeuille", --generate-from-view-key="nom_du_portefeuille", --generate-from-json="nom_du_fichier_json" et --generate-from-keys="nom_du_portefeuille" - - - - can't specify both --restore-deterministic-wallet and --non-deterministic - impossible de spécifier à la fois --restore-deterministic-wallet et --non-deterministic - - - + Electrum-style word list failed verification Échec de la vérification de la liste de mots de style Electrum - - - - - + + + + + + + + + + No data supplied, cancelled Pas de données fournies, annulation - - - - - - - - - + + + + + + + + + + + + failed to parse address échec de l'analyse de l'adresse - - + + failed to parse view key secret key échec de l'analyse de la clé secrète d'audit - - + + failed to verify view key secret key échec de la vérification de la clé secrète d'audit - - + + + view key does not match standard address la clé d'audit ne correspond pas à l'adresse standard - - - + + + + + account creation failed échec de la création du compte - + + + failed to parse spend key secret key échec de l'analyse de la clé secrète de dépense - + + failed to verify spend key secret key échec de la vérification de la clé secrète de dépense - + + spend key does not match standard address la clé de dépense ne correspond pas à l'adresse standard - + failed to open account échec de l'ouverture du compte - - - - - + + + + + wallet is null - - Daemon either is not started or wrong port was passed. Please make sure daemon is running or restart the wallet with the correct daemon address. - Le démon n'est pas démarré ou un mauvais port a été passé. Veuillez vous assurer que le démon fonctionne ou redémarrez le portefeuille avec l'adresse de démon correcte. - - - - + + invalid language choice entered. Please try again. choix de langue passé invalide. Veuillez réessayer. - + View key: Clé d'audit : - - Your wallet has been generated! -To start synchronizing with the daemon, use the "refresh" command. -Use the "help" command to see the list of available commands. -Always use the "exit" command when closing monero-wallet-cli to save -your current session's state. Otherwise, you might need to synchronize -your wallet again (your wallet keys are NOT at risk in any case). - - Votre portefeuille a été généré ! -Pour commencer la synchronisation avec le démon, utilisez la commande "refresh". -Utilisez la commande "help" pour voir la liste des commandes disponibles. -Utilisez toujours la commande "exit" pour fermer monero-wallet-cli afin de sauvegarder -l'état actuel de votre session. Sinon vous pourriez avoir besoin de synchroniser -votre portefeuille à nouveau (mais les clés de votre portefeuille ne risquent rien). - - - - + You may want to remove the file "%s" and try again Vous pourriez vouloir supprimer le fichier "%s" et réessayer - + failed to deinitialize wallet échec de la désinitialisation du portefeuille - - + + + this command requires a trusted daemon. Enable with --trusted-daemon cette commande requiert un démon de confiance. Activer avec --trusted-daemon - + blockchain can't be saved: la chaîne de blocs ne peut pas être sauvegardée : - - - - - + + daemon is busy. Please try again later. le démon est occupé. Veuillez réessayer plus tard. - - - - - + + no connection to daemon. Please make sure daemon is running. pas de connexion au démon. Veuillez vous assurer que le démon fonctionne. - + refresh error: erreur du rafraîchissement : - + Balance: Solde : - + pubkey clé publique - + key image image de clé - - + + unlocked déverrouillé - + ringct ringct - + T V - + F F - + locked vérrouillé - + RingCT RingCT - + - - - + payment ID has invalid format, expected 16 or 64 character hex string: format d'identifiant de paiement invalide, 16 ou 64 caractères hexadécimaux attendus : - + failed to get spent status échec de la récupération du statut de dépense - + the same transaction la même transaction - + blocks that are temporally very close blocs très proches dans le temps - + Locked blocks too high, max 1000000 (˜4 yrs) - - usage: get_tx_proof <txid> <dest_address> [<tx_key>] - - - - - failed to parse tx_key - - - - - Tx secret key was found for the given txid, but you've also provided another tx secret key which doesn't match the found one. - - - - - Tx secret key wasn't found in the wallet file. Provide it as the optional third parameter if you have it elsewhere. - - - - - Signature: - - - - - usage: check_tx_proof <txid> <address> <signature> - - - - - Signature header check error - - - - - - - Signature decoding error - - - - - Tx pubkey was not found - - - - + + Good signature - + + + Bad signature - - failed to generate key derivation - - - - + usage: integrated_address [payment ID] usage : integrated_address [ID paiement] - - Integrated address: account %s, payment ID %s - Adresse intégrée : compte %s, ID de paiement %s - - - + Standard address: Adresse standard : - + failed to parse payment ID or address échec de l'analyse de l'ID de paiement ou de l'adresse - + usage: address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] usage : address_book [(add (<adresse> [pid <ID de paiement long ou court>])|<adresse integrée> [<description avec des espaces possible>])|(delete <index>)] - + failed to parse payment ID échec de l'analyse de l'ID de paiement - + failed to parse index échec de l'analyse de l'index - + Address book is empty. Le carnet d'adresses est vide. - + Index: Index : - + + Address: Adresse : - + Payment ID: ID de paiement : - + + Description: Description : - + usage: set_tx_note [txid] free text note usage : set_tx_note [ID transaction] note de texte libre - + usage: get_tx_note [txid] usage : get_tx_note [ID transaction] - + usage: sign <filename> usage : sign <fichier> - + wallet is watch-only and cannot sign c'est un portefeuille d'audit et il ne peut pas signer - - - + + + + failed to read file échec de la lecture du fichier - + + usage: check_tx_proof <txid> <address> <signature_file> [<message>] + + + + + + + failed to load signature file + + + + + usage: get_spend_proof <txid> [<message>] + + + + + wallet is watch-only and cannot generate the proof + + + + + usage: check_spend_proof <txid> <signature_file> [<message>] + + + + + usage: get_reserve_proof (all|<amount>) [<message>] + + + + + The reserve proof can be generated only by a full wallet + + + + + usage: check_reserve_proof <address> <signature_file> [<message>] + + + + + Address must not be a subaddress + + + + + Good signature -- total: %s, spent: %s, unspent: %s + + + + + usage: show_transfers [in|out|all|pending|failed] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] + + + + + [Double spend seen on the network: this transaction may or may not end up being mined] + + + + + usage: unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] + + + + + There is no unspent output in the specified address + + + + + (no daemon) + + + + + (out of sync) + + + + + (Untitled account) + + + + + + + + + + failed to parse index: + + + + + + specify an index between 0 and + + + + + usage: + account + account new <label text with white spaces allowed> + account switch <index> + account label <index> <label text with white spaces allowed> + account tag <tag_name> <account_index_1> [<account_index_2> ...] + account untag <account_index_1> [<account_index_2> ...] + account tag_description <tag_name> <description> + + + + + +Grand total: + Balance: + + + + + , unlocked balance: + + + + + Untagged accounts: + + + + + Tag %s is unregistered. + + + + + Accounts with tag: + + + + + Tag's description: + + + + + Account + + + + + %c%8u %6s %21s %21s %21s + + + + + ---------------------------------------------------------------------------------- + + + + + %15s %21s %21s + + + + + Primary address + + + + + (used) + + + + + (Untitled address) + + + + + <index_min> is already out of bound + + + + + <index_max> exceeds the bound + + + + + usage: address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed> ] + + + + + + Integrated addresses can only be created for account 0 + + + + + Integrated address: %s, payment ID: %s + + + + + Subaddress: + + + + + usage: get_description + + + + + no description found + + + + + description found: + + + + + Filename: + + + + + Watch only + + + + + %u/%u multisig%s + + + + + Normal + + + + + Type: + + + + + Testnet: + + + + + Yes + + + + + No + + + + + This wallet is multisig and cannot sign + + + + usage: verify <filename> <address> <signature> usage : verify <fichier> <adresse> <signature> - + Bad signature from Mauvaise signature de - + Good signature from Bonne signature de - + usage: export_key_images <filename> usage : export_key_images <fichier> - + wallet is watch-only and cannot export key images c'est un portefeuille d'audit et il ne peut pas exporter les images de clé - - + + + failed to save file échec de l'enregistrement du fichier - + Signed key images exported to Images de clé signées exportées vers - + usage: import_key_images <filename> usage : import_key_images <fichier> - + usage: export_outputs <filename> usage : export_outputs <fichier> - + Outputs exported to Sorties exportées vers - + usage: import_outputs <filename> usage : import_outputs <fichier> - - + + + + amount is wrong: montant erroné : - - + expected number from 0 to attend un nombre de 0 à - - Money successfully sent, transaction - Fonds envoyés avec succès, transaction - - - - no connection to daemon. Please, make sure daemon is running. - pas de connexion au démon. Veuillez vous assurer que le démon fonctionne. - - - - - - - not enough outputs for specified mixin_count - pas assez de sorties pour le mixin spécifié - - - - - - - output amount - montant de la sortie - - - - - - - found outputs to mix - sorties à mélanger trouvées - - - - - - - transaction was not constructed - la transaction n'a pas été construite - - - - - - - transaction %s was rejected by daemon with status: - la transaction %s a été rejetée par le démon avec le statut : - - - - - - - one of destinations is zero - une des destinations est zéro - - - - Failed to find a suitable way to split transactions - Échec de la recherche d'une façon adéquate de scinder les transactions - - - - - - - unknown transfer error: - erreur de transfert inconnue : - - - + Sweeping Balayage de - - Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No) - Balayage de %s pour des frais totaux de %s. Est-ce correct ? (Y/Yes/Oui/N/No/Non) - - - - - + Money successfully sent, transaction: Fonds envoyés avec succès, transaction : - + Change goes to more than one address La monnaie rendue va à plus d'une adresse - + %s change to %s %s de monnaie rendue à %s - + no change sans monnaie rendue - + + + Transaction successfully signed to file Transaction signée avec succès dans le fichier - + usage: get_tx_key <txid> usage : get_tx_key <ID transaction> - - - - - - - + + + + + + + + + failed to parse txid échec de l'analyse de l'ID de transaction - + Tx key: Clé de transaction : - + no tx keys found for this txid aucune clé de transaction trouvée pour cet ID de transaction - + + usage: get_tx_proof <txid> <address> [<message>] + + + + + + + signature file saved to: + + + + + + + failed to save signature file + + + + usage: check_tx_key <txid> <txkey> <address> usage : check_tx_key <ID transaction> <clé transaction> <adresse> - - + + failed to parse tx key échec de l'analyse de la clé de transaction - - - failed to get transaction from daemon - échec de la récupération de la transaction du démon - - - - - failed to parse transaction from daemon - échec de l'analyse de la transaction du démon - - - - - failed to validate transaction from daemon - échec de la validation de la transaction du démon - - - - - failed to get the right transaction from daemon - échec de la récupération de la bonne transaction du démon - - - - failed to generate key derivation from supplied parameters - échec de la génération de la dérivation de clé à partir des paramètres fournis - - - + + + error: erreur : - + + received a reçu - + + in txid dans la transaction - + + received nothing in txid n'a rien reçu dans la transaction - + + WARNING: this transaction is not yet included in the blockchain! ATTENTION : cette transaction n'est pas encore inclue dans la chaîne de blocs ! - + + This transaction has %u confirmations Cette transaction a %u confirmations - + + WARNING: failed to determine number of confirmations! ATTENTION : échec de la détermination du nombre de confirmations ! - - usage: show_transfers [in|out|all|pending|failed] [<min_height> [<max_height>]] - usage : show_transfers [in|out|all|pending|failed] [<hauteur_minimum> [<hauteur_maximum>]] - - - + bad min_height parameter: mauvais paramètre hauteur_minimum : - + bad max_height parameter: mauvais paramètre hauteur_maximum : - + in reçu - - + + out payé - + failed échoué - + pending en attente - - usage: unspent_outputs [<min_amount> <max_amount>] - usage : unspent_outputs [<montant_minimum> <montant_maximum>] - - - + <min_amount> should be smaller than <max_amount> <montant_minimum> doit être inférieur à <montant_maximum> - + Amount: Montant : - + , number of keys: , nombre de clés : - + - + Min block height: Hauteur de bloc minimum : - + Max block height: Hauteur de bloc maximum : - + Min amount found: Montant minimum trouvé : - + Max amount found: Montant maximum trouvé : - + Total count: Compte total : - + Bin size: Taille de classe : - + Outputs per *: Sorties par * : - + count ^ @@ -2338,310 +3489,409 @@ Sorties par * : - + | | - + + + - + +--> block height +--> hauteur de bloc - + ^ ^ - + ^ ^ - + - + wallet portefeuille - - + + Random payment ID: ID de paiement aléatoire : - + Matching integrated address: Adresse intégrée correspondante : + + genms + + + Base filename (-1, -2, etc suffixes will be appended as needed) + + + + + Give threshold and participants at once as M/N + + + + + How many participants wil share parts of the multisig wallet + + + + + How many signers are required to sign a valid transaction + + + + + Create testnet multisig wallets + + + + + Generating %u %u/%u multisig wallets + + + + + Error verifying multisig extra info + + + + + Error finalizing multisig + + + + + Generated multisig wallets for address + + + + + Error creating multisig wallets: + + + + + This program generates a set of multisig wallets - use this simpler scheme only if all the participants trust each other + + + + + Error: expected N/M, but got: + + + + + + Error: either --scheme or both of --threshold and --participants may be given + + + + + Error: expected N > 1 and N <= M, but got N==%u and M==%d + + + + + Error: --filename-base is required + + + + + Error: unsupported scheme: only N/N and N-1/N are supported + + + sw - + Generate new wallet and save it to <arg> Générer un nouveau portefeuille et le sauvegarder dans <arg> - + Generate incoming-only wallet from view key Générer un portefeuille d'audit à partir d'une clé d'audit + + + Generate deterministic wallet from spend key + + Generate wallet from private keys Générer un portefeuille à partir de clés privées - + + Generate a master wallet from multisig wallet keys + + + + + Language for mnemonic + + + + Specify Electrum seed for wallet recovery/creation Spécifier la graine Electrum pour la récupération/création d'un portefeuille - + Recover wallet using Electrum-style mnemonic seed Récupérer un portefeuille en utilisant une graine mnémonique de style Electrum - + + Recover multisig wallet using Electrum-style mnemonic seed + + + + Generate non-deterministic view and spend keys Générer des clés d'audit et de dépense non déterministes - + Enable commands which rely on a trusted daemon Activer les commandes qui dépendent d'un démon de confiance - + Allow communicating with a daemon that uses a different RPC version Autoriser la communication avec un démon utilisant une version de RPC différente - + Restore from specific blockchain height Restaurer à partir d'une hauteur de bloc spécifique - + + The newly created transaction will not be relayed to the monero network + + + + daemon is busy. Please try again later. le démon est occupé. Veuillez réessayer plus tard. - + possibly lost connection to daemon connexion avec le démon peut-être perdue - + Error: Erreur : - + + This is the command line monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Failed to initialize wallet Échec de l'initialisation du portefeuille - - tools::dns_utils - - - DNSSEC validation passed - validation DNSSEC réussie - - - - WARNING: DNSSEC validation was unsuccessful, this address may not be correct! - ATTENTION : validation DNSSEC échouée, cette adresse pourrait ne pas être correcte ! - - - - For URL: - Pour l'URL : - - - - Monero Address = - Adresse Monero = - - - - Is this OK? (Y/n) - Est-ce correct ? (Y/n) - - - - you have cancelled the transfer request - vous avez annulé la requête de transfert - - tools::wallet2 - + Use daemon instance at <host>:<port> Utiliser l'instance de démon située à <hôte>:<port> - + Use daemon instance at host <arg> instead of localhost Utiliser l'instance de démon située à l'hôte <arg> au lieu de localhost - - Wallet password - Mot de passe du portefeuille - - - + Wallet password file Fichier mot de passe du portefeuille - + Use daemon instance at port <arg> instead of 18081 Utiliser l'instance de démon située au port <arg> au lieu de 18081 - + For testnet. Daemon must also be launched with --testnet flag Pour testnet, le démon doit aussi être lancé avec l'option --testnet - + Restricts to view-only commands Restreindre aux commandes en lecture-seule - + can't specify daemon host or port more than once impossible de spécifier l'hôte ou le port du démon plus d'une fois - + can't specify more than one of --password and --password-file impossible de spécifier plus d'une option parmis --password et --password-file - + the password file specified could not be read le fichier mot de passe spécifié n'a pas pu être lu - - Enter new password for the wallet - Entrez le mot de passe du portefeuille - - - - failed to read wallet password - échec de la lecture du mot de passe du portefeuille - - - + Failed to load file Échec du chargement du fichier - + Wallet password (escape/quote as needed) Mot de passe du portefeuille (échapper/citer si nécessaire) - + Specify username[:password] for daemon RPC client Spécifier le nom_utilisateur:[mot_de_passe] pour le client RPC du démon - + + no password specified; use --prompt-for-password to prompt for a password + + + + Failed to parse JSON Échec de l'analyse JSON - + Version %u too new, we can only grok up to %u Version %u trop récente, on comprend au mieux %u - + failed to parse view key secret key échec de l'analyse de la clé secrète d'audit - - - + + + failed to verify view key secret key échec de la vérification de la clé secrète d'audit - + failed to parse spend key secret key échec de l'analyse de la clé secrète de dépense - - - + + + failed to verify spend key secret key échec de la vérification de la clé secrète de dépense - + Electrum-style word list failed verification Échec de la vérification de la liste de mots de style Electrum - - At least one of Electrum-style word list and private view key must be specified - Au moins une des listes de mots de style Electrum ou clé privée d'audit doit être spécifiée + + At least one of Electrum-style word list and private view key and private spend key must be specified + - + Both Electrum-style word list and private key(s) specified Liste de mots de style Electrum et clé privée spécifiées en même temps - + invalid address adresse invalide - + view key does not match standard address la clé d'audit ne correspond pas à l'adresse standard - + spend key does not match standard address la clé de dépense ne correspond pas à l'adresse standard - + Cannot generate deprecated wallets from JSON Impossible de générer un portefeuille obsolète à partir de JSON - + + failed to parse address: + + + + + Address must be specified in order to create watch-only wallet + + + + failed to generate new wallet: échec de la génération du nouveau portefeuille : - + + + + + + + + + Primary account + + + + + No funds received in this tx. + + + + failed to read file échec de la lecture du fichier @@ -2649,94 +3899,125 @@ Sorties par * : tools::wallet_rpc_server - + Daemon is local, assuming trusted Le démon est local, supposons qu'il est de confiance - + + Failed to create directory + + + + + Failed to create directory %s: %s + + + + Cannot specify -- Impossible de spécifier -- - + and -- et -- - + Failed to create file Échec de la création du fichier - + . Check permissions or remove file . Vérifiez les permissions ou supprimez le fichier - + Error writing to file Erreur d'écriture dans le fichier - + RPC username/password is stored in file nom_utilisateur/mot_de_passe RPC sauvegardé dans le fichier - + + Tag %s is unregistered. + + + + + Transaction not possible. Available only %s, transaction amount %s = %s + %s (fee) + + + + + This is the RPC monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Can't specify more than one of --wallet-file and --generate-from-json Impossible de spécifier plus d'une option parmis --wallet-file et --generate-from-json - + Must specify --wallet-file or --generate-from-json or --wallet-dir --wallet-file, --generate-from-json ou --wallet-dir doit être spécifié - + Loading wallet... Chargement du portefeuille... - - + + Saving wallet... Sauvegarde du portefeuille... - - - Saved ok - Sauvegarde réussie + + + Successfully saved + - - Loaded ok - Chargement OK + + Successfully loaded + - + Wallet initialization failed: Échec de l'initialisation du portefeuille : - + Failed to initialize wallet RPC server Échec de l'initialisation du serveur RPC du portefeuille - + Starting wallet RPC server Démarrage du serveur RPC du portefeuille - + + Failed to run wallet: + + + + Stopped wallet RPC server Arrêt du serveur RPC du portefeuille - + Failed to save wallet: Échec de la sauvegarde du portefeuille : @@ -2744,58 +4025,65 @@ Sorties par * : wallet_args - - + + + Wallet options Options du portefeuille - + Generate wallet from JSON format file Générer un portefeuille à partir d'un fichier au format JSON - + Use wallet <arg> Utiliser le portefeuille <arg> - + Max number of threads to use for a parallel job Nombre maximum de threads à utiliser pour les travaux en parallèle - + Specify log file Spécifier le fichier journal - + Config file Fichier de configuration - + General options Options générales - + + This is the command line monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Can't find config file Impossible de trouver le fichier de configuration - + Logging to: Journalisation dans : - + Logging to %s Journalisation dans %s - + Usage: Usage : diff --git a/translations/monero_it.ts b/translations/monero_it.ts index d0cc40304..9a00f9d51 100644 --- a/translations/monero_it.ts +++ b/translations/monero_it.ts @@ -4,24 +4,24 @@ Monero::AddressBookImpl - + Invalid destination address Indirizzo destinatario non valido - + Invalid payment ID. Short payment ID should only be used in an integrated address ID pagamento non valido. Il pagamento ID corto dovrebbe essere usato solo in un indirizzo integrato - + Invalid payment ID ID pagamento non valido - - Integrated address and long payment id can't be used at the same time - Indirizzo integrato e ID pagamento lungo non possono essere usati nello stesso momento + + Integrated address and long payment ID can't be used at the same time + @@ -37,32 +37,32 @@ Impossibile scrivere transazione/i su file - + daemon is busy. Please try again later. Il daemon è impegnato. Prova più tardi. - + no connection to daemon. Please make sure daemon is running. Nessuna connessione con il daemon. Controlla che sia operativo. - + transaction %s was rejected by daemon with status: La transazione %s è stata respinta dal daemon con status: - + . Reason: . Motivo: - + Unknown exception: Eccezione sconosciuta: - + Unhandled exception Eccezione non gestita @@ -81,323 +81,324 @@ Firma transazione fallita - + Claimed change does not go to a paid address Il cambiamento richiesto non porta a un indirizzo pagato - + Claimed change is larger than payment to the change address Il cambiamento richiesto è più largo del pagamento all'indirizzo di cambio - + Change goes to more than one address Il cambiamento ha effetto su più di un indirizzo - + sending %s to %s inviando %s a %s - + with no destinations senza destinazioni - + %s change to %s %s cambia in %s - + no change nessuna modifica - - Loaded %lu transactions, for %s, fee %s, %s, %s, with min mixin %lu. %s - Caricato %lu transazioni, per %s, commissione %s, %s, %s, %s, con mixin %lu. %s + + Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu. %s + Monero::WalletImpl - + payment id has invalid format, expected 16 or 64 character hex string: L'id pagamento è in un formato invalido, dovrebbe essere una stringa hex di 16 o 64 caratteri: - + Failed to add short payment id: Impossibile aggiungere id pagamento corto - - + + daemon is busy. Please try again later. il daemon è impegnato. Prova più tardi - - + + no connection to daemon. Please make sure daemon is running. nessuna connessione con il daemon. Accertati che sia operativo - - + + RPC error: errore RPC: - + + + not enough outputs for specified ring size + + + + + + found outputs to use + + + + + Please sweep unmixable outputs. + + + + failed to get random outputs to mix impossibile recuperare outputs random da mixare - - + + not enough money to transfer, available only %s, sent amount %s non hai abbastanza fondi da trasferire, sono disponibili solo %s, ammontare inviato %s - + failed to parse address parsing indirizzo fallito - + failed to parse secret spend key impossibile fare il parsing della chiave segreta di spesa - + No view key supplied, cancelled Non è stata fornita nessuna chiave di visualizzazione - + failed to parse secret view key impossibile fare il parsing della chiave segreta di visualizzazione - + failed to verify secret spend key impossibile verificare chiave segreta di spesa - + spend key does not match address la chiave di spesa non corrisponde all'indirizzo - + failed to verify secret view key verifica chiave segreta di visualizzazione fallita - + view key does not match address la chiave di visualizzazione non corrisponde all'indirizzo - + failed to generate new wallet: impossibile generare nuovo portafoglio: - + + Failed to send import wallet request + + + + Failed to load unsigned transactions Caricamento transazioni non firmate fallito - + Failed to load transaction from file Caricamento transazione da file fallito - + Wallet is view only Il portafoglio è di tipo solo visualizzazione - + failed to save file impossibile salvare il file - + + Key images can only be imported with a trusted daemon + + + + Failed to import key images: Impossibile importare immagini chiave: - + + Failed to get subaddress label: + + + + + Failed to set subaddress label: + + + + failed to get random outputs to mix: %s impossibile recuperare outputs casuali da mixare: %s - - + + + not enough money to transfer, overall balance only %s, sent amount %s + + + + + not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee) non hai abbastanza fondi da trasferire, disponibili solo %s, ammontare transazione %s = %s + %s (commissione) - - - not enough outputs for specified mixin_count - outputs insufficienti per il numero di mixaggi specificato - - - - + + output amount ammontare output - - - found outputs to mix - trovati outputs da mixare - - - - + + transaction was not constructed transazione non costruita - - + + transaction %s was rejected by daemon with status: la transazione %s è stata rifiutata dal daemon con status: - - + + one of destinations is zero una delle destinazioni è zero - - + + failed to find a suitable way to split transactions impossibile trovare un modo per dividere le transazioni - - + + unknown transfer error: errore trasferimento sconosciuto: - - + + internal error: errore interno: - - + + unexpected error: errore inaspettato: - - + + unknown error errore sconosciuto - + + + + + + + Failed to parse txid + + + + + no tx keys found for this txid + nessuna chiave tx trovata per questo txid + + + + + Failed to parse tx key + + + + + + + + Failed to parse address + Parsing indirizzo fallito + + + + Address must not be a subaddress + + + + Rescan spent can only be used with a trusted daemon "Riscannerizza spesi" può essere utilizzato solo da un daemon fidato - - Monero::WalletManagerImpl - - - failed to parse txid - analisi txid fallita - - - - - failed to parse tx key - parsing chiave tx fallito - - - - failed to parse address - parsing indirizzo fallito - - - - failed to get transaction from daemon - impossibile recuperare la transazione dal daemon - - - - failed to parse transaction from daemon - impossibile fare il parsing della transazione dal daemon - - - - failed to validate transaction from daemon - convalida transazione dal daemon fallita - - - - failed to get the right transaction from daemon - impossibile recuperare la giusta transazione dal daemon - - - - failed to generate key derivation from supplied parameters - impossibile generare derivazione chiave dai parametri forniti - - - - error: - errore: - - - - received - ricevuto - - - - in txid - in txid - - - - received nothing in txid - nulla ricevuto in txid - - Wallet - + Failed to parse address Parsing indirizzo fallito - + Failed to parse key Parsing chiave fallito - + failed to verify key verifica chiave fallita - + key does not match address la chiave non corrisponde all'indirizzo @@ -405,2212 +406,3481 @@ command_line - + yes sì + + + no + + cryptonote::rpc_args - + Specify IP to bind RPC server Specificare IP da associare al server RPC - + Specify username[:password] required for RPC server Specifica username[:password] richiesta per server RPC - + Confirm rpc-bind-ip value is NOT a loopback (local) IP Conferma valore rpc-bind-ip NON è un loopback IP (locale) - + + Specify a comma separated list of origins to allow cross origin resource sharing + + + + Invalid IP address given for -- Indirizzo IP non valido dato per -- - + permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with -- permette connessioni esterne non criptate in entrata. Considera in alternativa un tunnel SSH o un proxy SSL. Sovrascrivi con -- - + Username specified with -- Nome utente specificato con -- - + + cannot be empty non può essere vuoto + + + requires RFC server password -- + + cryptonote::simple_wallet - + Commands: Comandi: - + failed to read wallet password impossibile leggere la password del portafoglio - + invalid password password non valida - - start_mining [<number_of_threads>] - Start mining in daemon - start_mining [<number_of_threads>] - Avvia mining nel daemon - - - - Stop mining in daemon - Interrompi mining nel daemon - - - - Save current blockchain data - Salva dati correnti blockchain - - - - Show current wallet balance - Mostra bilancio portafoglio attuale - - - - Show blockchain height - Mostra "altezza" blockchain - - - - Show current wallet public address - Mostra indirizzo pubblico del portafoglio corrente - - - - Show this help - Mostra questo aiuto - - - + set seed: needs an argument. available options: language imposta seed: richiede una definizione. opzioni disponibili: lingua - + set: unrecognized argument(s) imposta: definizione/i non riconosciuta/e - + wallet file path not valid: percorso file portafoglio non valido: - + Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting. Sto tentando di generare o ripristinare il portafoglio, ma i(l) file specificato/i esiste/esistono già. Sto uscendo per non rischiare di sovrascrivere. - + usage: payment_id uso: payment_id - - sweep_below <amount_threshold> [mixin] address [] - Send all unlocked outputs below the threshold to an address - sweep_below <amount_threshold> [mixin] address [] - Invia tutti gli outputs sbloccati sotto la soglia specificata a un indirizzo - - - - Generate a signature to prove payment to <address> in <txid> using the transaction secret key (r) without revealing it - Genera una firma per provare un pagamento a <address> in <txid> usando la chiave di transazione (r) senza rivelarla - - - - Check tx proof for payment going to <address> in <txid> - Verifica prova tx per pagamento inviato a <indirizzo> in <txid> - - - - Generate a new random full size payment id - these will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids - Genera un nuovo id pagamento casuale di dimensione completa - queste non saranno criptate nel blockchain, considera integrated_address per payment ids corti crittati - - - + needs an argument ha bisogno di un argomento - - - - - - - + + + + + + + + + + 0 or 1 0 o 1 - - integer >= 2 - integrale >= 2 - - - + 0, 1, 2, 3, or 4 0, 1, 2, 3, o 4 - + + unsigned integer integrale non firmato - + NOTE: the following 25 words can be used to recover access to your wallet. Write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control. ATTENZIONE: le seguenti 25 parole possono essere usate per ripristinare il tuo portafoglio. Scrivile e conservale da qualche parte al sicuro. - + specify a recovery parameter with the --electrum-seed="words list here" specificare un parametro di ripristino con --electrum-seed="lista parole qui" - + wallet failed to connect to daemon: impossibile connettere il portafoglio al daemon: - + Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version. Il daemon usa una versione principale RPC (%u) diversa da quella del portafoglio (%u): %s. Aggiorna una delle due, o usa --allow-mismatched-daemon-version. - + List of available languages for your wallet's seed: Lista delle lingue disponibili per il seed del tuo portafoglio: - + Enter the number corresponding to the language of your choice: Inserisci il numero corrispondente al linguaggio da te scelto: - + You had been using a deprecated version of the wallet. Please use the new seed that we provide. Hai usato una versione obsoleta del portafoglio. Per favore usa il nuovo seed che ti abbiamo fornito. - - + + Generated new wallet: Nuovo portafoglio generato: - - + + + failed to generate new wallet: impossibile generare nuovo portafoglio: - + Opened watch-only wallet Portafoglio solo-vista aperto - + Opened wallet Portafoglio aperto - + You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet. Stai utilizzando una versione disapprovata del portafoglio. Per favore procedi nell'upgrade del portafoglio. - + You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now. Stai utilizzando una versione disapprovata del portafoglio. Il formato del tuo portafoglio sta venendo aggiornato adesso. - + failed to load wallet: impossibile caricare portafoglio: - + Use the "help" command to see the list of available commands. Usa il comando "help" per visualizzare la lista dei comandi disponibili. - + Wallet data saved Dati del portafoglio salvati - + Mining started in daemon Mining avviato nel daemon - + mining has NOT been started: il mining NON è stato avviato: - + Mining stopped in daemon Mining nel daemon interrotto - + mining has NOT been stopped: il mining NON è stato interrotto: - + Blockchain saved Blockchain salvata - - - + + + Height Blocco - - - + transaction transazione - - received - ricevuto/i - - - + spent speso/i - + unsupported transaction format formato transazione non supportato - + Starting refresh... Sto iniziando il refresh... - + Refresh done, blocks received: Refresh finito, blocchi ricevuti: - - + + payment id has invalid format, expected 16 or 64 character hex string: l'id pagamento ha un formato invalido, dovrebbe essere una stringa hex di 16 o 64 caratteri: - + bad locked_blocks parameter: parametro locked_blocks non corretto: - - + + + a single transaction cannot use more than one payment id: una singola transazione non può usare più di un id pagamento: - - + + + + failed to set up payment id, though it was decoded correctly impossibile impostare id pagamento, anche se è stato decodificado correttamente - - - - - + + + + + + + + transaction cancelled. transazione cancellata. - + Sending %s. Sto inviando %s. - + Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s La tua transazione deve essere divisa in %llu transazioni. Una commissione verrà applicata per ogni transazione, per un totale di %s commissioni - + The transaction fee is %s La commissione per la transazione è %s - + , of which %s is dust from change , della quale %s è polvere dovuta allo scambio - + . . - + A total of %s from dust change will be sent to dust address Un totale di %s in polvere verrà inviato all'indirizzo della polvere - + . This transaction will unlock on block %llu, in approximately %s days (assuming 2 minutes per block) . Questa transazione verrà sbloccata al blocco %llu, in approssimativamente %s giorni (supponendo 2 minuti per blocco) - - - + + + + + + + + Failed to write transaction(s) to file Impossibile scrivere transazione/i su file - - - + + + + + + + + Unsigned transaction(s) successfully written to file: Transazioni/e non firmata/e scritte/a con successo su file: - - - - - Not enough money in unlocked balance - Non hai abbastanza fondi nel bilancio sbloccato - - - - - - - Failed to find a way to create transactions. This is usually due to dust which is so small it cannot pay for itself in fees, or trying to send more money than the unlocked balance, or not leaving enough for fees - Impossibile creare transazioni. Questo succede di solito perchè l'ammontare di polvere è così piccolo da non poter pagare le proprie commissioni, oppure stai provando a mandare più fondi di quelli che possiedi nel bilancio sbloccato, o non hai aggiunto abbastanza commissioni - - - - - - Reason: - Motivo: - - - - - - failed to find a suitable way to split transactions - impossibile trovare un modo adatto per dividere le transazioni - - - + No unmixable outputs found Nessun output non-mixabile trovato - + No address given Non è stato fornito nessun indirizzo - + Claimed change does not go to a paid address Il cambiamento richiesto non porta a un indirizzo pagato - + Claimed change is larger than payment to the change address Il cambiamento richiesto è più largo del pagamento all'indirizzo di cambio - + sending %s to %s sto mandando %s a %s - + + dummy output(s) + + + + with no destinations senza destinazioni - + + Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu, %s. %sIs this okay? (Y/Yes/N/No): + + + + + This is a multisig wallet, it can only sign with sign_multisig + + + + + usage: sign_transfer [export] + + + + Failed to sign transaction Impossibile firmare transazione - + Failed to sign transaction: Impossibile firmare transazione: - + + Transaction raw hex data exported to + + + + Failed to load transaction from file Caricamento transazione da file fallito - - daemon is busy. Please try again later - il daemon è occupato. Prova più tardi - - - - - - - - + + RPC error: errore RPC: - + wallet is watch-only and has no spend key il portafoglio è solo-vista e non ha una chiave di spesa - + + + Your original password was incorrect. La tua password originale era scorretta - + Error with wallet rewrite: Errore riscrittura wallet: - + priority must be 0, 1, 2, 3, or 4 la priorità deve essere 0, 1, 2, 3, or 4 - + + priority must be 0, 1, 2, 3, or 4 la priorità deve essere 0, 1, 2, 3, or 4 - - priority must be 0, 1, 2, 3, or 4 - la priorità deve essere 0, 1, 2, 3, or 4 - - - + invalid unit unità invalida - + + invalid count: must be an unsigned integer conteggio invalido: deve essere un integrale non firmato - + invalid value valore invalido - - Same as transfer, but using an older transaction building algorithm - Lo stesso di transfer, ma usando un vecchio algoritmo per costruire la transazione - - - - sweep_all [mixin] address [] - Send all unlocked balance to an address - sweep_all [mixin] address [] - Manda tutto il bilancio sbloccato ad un indirizzo - - - - donate [<mixin_count>] <amount> [payment_id] - Donate <amount> to the development team (donate.getmonero.org) - donate [<mixin_count>] <amount> [payment_id] - Dona <amount> al team di sviluppo (donate.getmonero.org) - - - - set_log <level>|<categories> - Change current log detail (level must be <0-4>) - set_log <level>|<categories> - Cambia livello dettaglio log (il livello deve essere <0-4>) - - - - address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] - Print all entries in the address book, optionally adding/deleting an entry to/from it - address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] - Mostra tutte le voci nella rubrica, hai l'opzione di aggiungere/eliminare delle voci - - - - show_transfers [in|out|pending|failed|pool] [<min_height> [<max_height>]] - Show incoming/outgoing transfers within an optional height range - show_transfers [in|out|pending|failed|pool] [<min_height> [<max_height>]] - Mostra trasferimenti in entrata/uscita entro un altezza del blocco opzionale - - - - Show information about a transfer to/from this address - Mostra informazioni riguardo un trasferimento da/per questo indirizzo - - - - Change wallet password - Cambia password portafoglio - - - + usage: set_log <log_level_number_0-4> | <categories> uso: set_log <log_level_number_0-4> | <categories> - + (Y/Yes/N/No): (S/Sì/N/No): - - + + bad m_restore_height parameter: parametro m_restore_height non corretto: - + date format must be YYYY-MM-DD il formato della data deve essere YYYY-MM-DD - + Restore height is: Ripristina altezza è: - - + + Is this okay? (Y/Yes/N/No): Va bene? (S/Sì/N/No): - + Daemon is local, assuming trusted Il daemon è locale, viene considerato fidato - + Password for new watch-only wallet Password per il nuovo portafoglio solo-vista - + invalid arguments. Please use start_mining [<number_of_threads>] [do_bg_mining] [ignore_battery], <number_of_threads> should be from 1 to argomenti invalidi. Usa start_mining [<number_of_threads>] [do_bg_mining] [ignore_battery], <number_of_threads> dovrebbe risultare da 1 a - - - - - + internal error: errore interno: - - - - - - + + + unexpected error: errore inaspettato: - - - - - - + + + + + + + + + unknown error errore sconosciuto - + refresh failed: refresh fallito: - + Blocks received: Blocchi ricevuti: - + unlocked balance: bilancio sbloccato: - - - + + + amount ammontare - + + false + + + + + Unknown command: + + + + + Command usage: + + + + + Command description: + + + + + wallet is multisig but not yet finalized + + + + + Enter optional seed encryption passphrase, empty to see raw seed + + + + + Failed to retrieve seed + + + + + wallet is multisig and has no seed + + + + + Cannot connect to daemon + + + + + Current fee is %s monero per kB + + + + + Error: failed to estimate backlog array size: + + + + + Error: bad estimated backlog array size + + + + + (current) + + + + + %u block (%u minutes) backlog at priority %u%s + + + + + %u to %u block (%u to %u minutes) backlog at priority %u + + + + + No backlog at priority + + + + + + This wallet is already multisig + + + + + + wallet is watch-only and cannot be made multisig + + + + + + This wallet has been used before, please use a new wallet to create a multisig wallet + + + + + Your password is incorrect. + + + + + Send this multisig info to all other participants, then use make_multisig <threshold> <info1> [<info2>...] with others' multisig info + + + + + This includes the PRIVATE view key, so needs to be disclosed only to that multisig wallet's participants + + + + + usage: make_multisig <threshold> <multisiginfo1> [<multisiginfo2>...] + + + + + Invalid threshold + + + + + Another step is needed + + + + + Send this multisig info to all other participants, then use finalize_multisig <info1> [<info2>...] with others' multisig info + + + + + Error creating multisig: + + + + + Error creating multisig: new wallet is not multisig + + + + + multisig address: + + + + + + + This wallet is not multisig + + + + + This wallet is already finalized + + + + + usage: finalize_multisig <multisiginfo1> [<multisiginfo2>...] + + + + + Failed to finalize multisig + + + + + Failed to finalize multisig: + + + + + + + + + This multisig wallet is not yet finalized + + + + + usage: export_multisig_info <filename> + + + + + Error exporting multisig info: + + + + + Multisig info exported to + + + + + usage: import_multisig_info <filename1> [<filename2>...] - one for each other participant + + + + + Multisig info imported + + + + + Failed to import multisig info: + + + + + Failed to update spent status after importing multisig info: + + + + + Untrusted daemon, spent status may be incorrect. Use a trusted daemon and run "rescan_spent" + + + + + + + This is not a multisig wallet + + + + + usage: sign_multisig <filename> + + + + + Failed to sign multisig transaction + + + + + Multisig error: + + + + + Failed to sign multisig transaction: + + + + + It may be relayed to the network with submit_multisig + + + + + usage: submit_multisig <filename> + + + + + + Failed to load multisig transaction from file + + + + + + Multisig transaction signed by only %u signers, needs %u more signatures + + + + + + Transaction successfully submitted, transaction + + + + + + You can check its status by using the `show_transfers` command. + + + + + usage: export_raw_multisig <filename> + + + + + Failed to export multisig transaction to file + + + + + Saved exported multisig transaction file(s): + + + + + + + ring size must be an integer >= + + + + + could not change default ring size + + + + + Invalid height + + + + + start_mining [<number_of_threads>] [bg_mining] [ignore_battery] + + + + + Start mining in the daemon (bg_mining and ignore_battery are optional booleans). + + + + + Stop mining in the daemon. + + + + + set_daemon <host>[:<port>] + + + + + Set another daemon to connect to. + + + + + Save the current blockchain data. + + + + + Synchronize the transactions and balance. + + + + + balance [detail] + + + + + Show the wallet's balance of the currently selected account. + + + + + incoming_transfers [available|unavailable] [verbose] [index=<N1>[,<N2>[,...]]] + + + + + Show the incoming transfers, all or filtered by availability and address index. + + + + + payments <PID_1> [<PID_2> ... <PID_N>] + + + + + Show the payments for the given payment IDs. + + + + + Show the blockchain height. + + + + + transfer_original [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] + + + + + Transfer <amount> to <address> using an older transaction building algorithm. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] + + + + + Transfer <amount> to <address>. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + locked_transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <addr> <amount> <lockblocks> [<payment_id>] + + + + + Transfer <amount> to <address> and lock it for <lockblocks> (max. 1000000). If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + Send all unmixable outputs to yourself with ring_size 1 + + + + + sweep_all [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] + + + + + Send all unlocked balance to an address. If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. + + + + + sweep_below <amount_threshold> [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] + + + + + Send all unlocked outputs below the threshold to an address. + + + + + sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] + + + + + Send a single output of the given key image to an address without change. + + + + + donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] + + + + + Donate <amount> to the development team (donate.getmonero.org). + + + + + sign_transfer <file> + + + + + Sign a transaction from a <file>. + + + + + Submit a signed transaction from a file. + + + + + set_log <level>|{+,-,}<categories> + + + + + Change the current log detail (level must be <0-4>). + + + + + account + account new <label text with white spaces allowed> + account switch <index> + account label <index> <label text with white spaces allowed> + account tag <tag_name> <account_index_1> [<account_index_2> ...] + account untag <account_index_1> [<account_index_2> ...] + account tag_description <tag_name> <description> + + + + + If no arguments are specified, the wallet shows all the existing accounts along with their balances. +If the "new" argument is specified, the wallet creates a new account with its label initialized by the provided label text (which can be empty). +If the "switch" argument is specified, the wallet switches to the account specified by <index>. +If the "label" argument is specified, the wallet sets the label of the account specified by <index> to the provided label text. +If the "tag" argument is specified, a tag <tag_name> is assigned to the specified accounts <account_index_1>, <account_index_2>, .... +If the "untag" argument is specified, the tags assigned to the specified accounts <account_index_1>, <account_index_2> ..., are removed. +If the "tag_description" argument is specified, the tag <tag_name> is assigned an arbitrary text <description>. + + + + + address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed>] + + + + + If no arguments are specified or <index> is specified, the wallet shows the default or specified address. If "all" is specified, the walllet shows all the existing addresses in the currently selected account. If "new " is specified, the wallet creates a new address with the provided label text (which can be empty). If "label" is specified, the wallet sets the label of the address specified by <index> to the provided label text. + + + + + integrated_address [<payment_id> | <address>] + + + + + Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID + + + + + address_book [(add ((<address> [pid <id>])|<integrated address>) [<description possibly with whitespaces>])|(delete <index>)] + + + + + Print all entries in the address book, optionally adding/deleting an entry to/from it. + + + + + Save the wallet data. + + + + + Save a watch-only keys file. + + + + + Display the private view key. + + + + + Display the private spend key. + + + + + Display the Electrum-style mnemonic seed + + + + + set <option> [<value>] + + + + + Available options: + seed language + Set the wallet's seed language. + always-confirm-transfers <1|0> + Whether to confirm unsplit txes. + print-ring-members <1|0> + Whether to print detailed information about ring members during confirmation. + store-tx-info <1|0> + Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference. + default-ring-size <n> + Set the default ring size (default and minimum is 5). + auto-refresh <1|0> + Whether to automatically synchronize new blocks from the daemon. + refresh-type <full|optimize-coinbase|no-coinbase|default> + Set the wallet's refresh behaviour. + priority [0|1|2|3|4] + Set the fee too default/unimportant/normal/elevated/priority. + confirm-missing-payment-id <1|0> + ask-password <1|0> + unit <monero|millinero|micronero|nanonero|piconero> + Set the default monero (sub-)unit. + min-outputs-count [n] + Try to keep at least that many outputs of value at least min-outputs-value. + min-outputs-value [n] + Try to keep at least min-outputs-count outputs of at least that value. + merge-destinations <1|0> + Whether to merge multiple payments to the same destination address. + confirm-backlog <1|0> + Whether to warn if there is transaction backlog. + confirm-backlog-threshold [n] + Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks. + refresh-from-block-height [n] + Set the height before which to ignore blocks. + auto-low-priority <1|0> + Whether to automatically use the low priority fee level when it's safe to do so. + + + + + Display the encrypted Electrum-style mnemonic seed. + + + + + Rescan the blockchain for spent outputs. + + + + + get_tx_key <txid> + + + + + Get the transaction key (r) for a given <txid>. + + + + + check_tx_key <txid> <txkey> <address> + + + + + Check the amount going to <address> in <txid>. + + + + + get_tx_proof <txid> <address> [<message>] + + + + + Generate a signature proving funds sent to <address> in <txid>, optionally with a challenge string <message>, using either the transaction secret key (when <address> is not your wallet's address) or the view secret key (otherwise), which does not disclose the secret key. + + + + + check_tx_proof <txid> <address> <signature_file> [<message>] + + + + + Check the proof for funds going to <address> in <txid> with the challenge string <message> if any. + + + + + get_spend_proof <txid> [<message>] + + + + + Generate a signature proving that you generated <txid> using the spend secret key, optionally with a challenge string <message>. + + + + + check_spend_proof <txid> <signature_file> [<message>] + + + + + Check a signature proving that the signer generated <txid>, optionally with a challenge string <message>. + + + + + get_reserve_proof (all|<amount>) [<message>] + + + + + Generate a signature proving that you own at least this much, optionally with a challenge string <message>. +If 'all' is specified, you prove the entire sum of all of your existing accounts' balances. +Otherwise, you prove the reserve of the smallest possible amount above <amount> available in your current account. + + + + + check_reserve_proof <address> <signature_file> [<message>] + + + + + Check a signature proving that the owner of <address> holds at least this much, optionally with a challenge string <message>. + + + + + show_transfers [in|out|pending|failed|pool] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] + + + + + Show the incoming/outgoing transfers within an optional height range. + + + + + unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] + + + + + Show the unspent outputs of a specified address within an optional amount range. + + + + + Rescan the blockchain from scratch. + + + + + set_tx_note <txid> [free text note] + + + + + Set an arbitrary string note for a <txid>. + + + + + get_tx_note <txid> + + + + + Get a string note for a txid. + + + + + set_description [free text note] + + + + + Set an arbitrary description for the wallet. + + + + + Get the description of the wallet. + + + + + Show the wallet's status. + + + + + Show the wallet's information. + + + + + sign <file> + + + + + Sign the contents of a file. + + + + + verify <filename> <address> <signature> + + + + + Verify a signature on the contents of a file. + + + + + export_key_images <file> + + + + + Export a signed set of key images to a <file>. + + + + + import_key_images <file> + + + + + Import a signed key images list and verify their spent status. + + + + + export_outputs <file> + + + + + Export a set of outputs owned by this wallet. + + + + + import_outputs <file> + + + + + Import a set of outputs owned by this wallet. + + + + + show_transfer <txid> + + + + + Show information about a transfer to/from this address. + + + + + Change the wallet's password. + + + + + Generate a new random full size payment id. These will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids. + + + + + Print the information about the current fee and transaction backlog. + + + + + Export data needed to create a multisig wallet + + + + + make_multisig <threshold> <string1> [<string>...] + + + + + Turn this wallet into a multisig wallet + + + + + finalize_multisig <string> [<string>...] + + + + + Turn this wallet into a multisig wallet, extra step for N-1/N wallets + + + + + export_multisig_info <filename> + + + + + Export multisig info for other participants + + + + + import_multisig_info <filename> [<filename>...] + + + + + Import multisig info from other participants + + + + + sign_multisig <filename> + + + + + Sign a multisig transaction from a file + + + + + submit_multisig <filename> + + + + + Submit a signed multisig transaction from a file + + + + + export_raw_multisig_tx <filename> + + + + + Export a signed multisig transaction to a file + + + + + help [<command>] + + + + + Show the help section or the documentation about a <command>. + + + + + integer >= + + + + + block height + + + + + No wallet found with that name. Confirm creation of new wallet named: + + + + + can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-spend-key="wallet_name", --generate-from-keys="wallet_name", --generate-from-multisig-keys="wallet_name" and --generate-from-json="jsonfilename" + + + + + can't specify both --restore-deterministic-wallet or --restore-multisig-wallet and --non-deterministic + + + + + --restore-multisig-wallet uses --generate-new-wallet, not --wallet-file + + + + + specify a recovery parameter with the --electrum-seed="multisig seed here" + + + + + Multisig seed failed verification + + + + + Enter seed encryption passphrase, empty if none + + + + + + This address is a subaddress which cannot be used here. + + + + + Error: expected M/N, but got: + + + + + Error: expected N > 1 and N <= M, but got: + + + + + Error: M/N is currently unsupported. + + + + + Generating master wallet from %u of %u multisig wallet keys + + + + + failed to parse secret view key + impossibile fare il parsing della chiave segreta di visualizzazione + + + + failed to verify secret view key + verifica chiave segreta di visualizzazione fallita + + + + Secret spend key (%u of %u): + + + + + Error: M/N is currently unsupported + + + + + Restore height + + + + + Still apply restore height? (Y/Yes/N/No): + + + + + Warning: using an untrusted daemon at %s, privacy will be lessened + + + + + Daemon either is not started or wrong port was passed. Please make sure daemon is running or change the daemon address using the 'set_daemon' command. + + + + + Your wallet has been generated! +To start synchronizing with the daemon, use the "refresh" command. +Use the "help" command to see the list of available commands. +Use "help <command>" to see a command's documentation. +Always use the "exit" command when closing monero-wallet-cli to save +your current session's state. Otherwise, you might need to synchronize +your wallet again (your wallet keys are NOT at risk in any case). + + + + + + failed to generate new mutlisig wallet + + + + + Generated new %u/%u multisig wallet: + + + + + Opened %u/%u multisig wallet%s + + + + + Use "help <command>" to see a command's documentation. + + + + + + wallet is multisig and cannot save a watch-only version + + + + + missing daemon URL argument + + + + + Unexpected array length - Exited simple_wallet::set_daemon() + + + + + This does not seem to be a valid daemon URL. + + + + + + txid + + + + + + idx + + + + + (Some owned outputs have partial key images - import_multisig_info needed) + + + + + Currently selected account: [ + + + + + ] + + + + + Tag: + + + + + (No tag assigned) + + + + + Balance per address: + + + + + Address + + + + + + Balance + + + + + + Unlocked balance + + + + + Outputs + + + + + + Label + + + + + %8u %6s %21s %21s %7u %21s + + + + + usage: balance [detail] + + + + + + usage: incoming_transfers [available|unavailable] [verbose] [index=<N>] + + + + spent spesi - + global index indice globale - + tx id tx id - + + + addr index + + + + No incoming transfers Nessun trasferimento in entrata - + No incoming available transfers Nessun trasferimento in entrata disponibile - + No incoming unavailable transfers Nessun trasferimento indisponibile in entrata - + expected at least one payment ID deve esserci almeno un payment ID - + payment pagamento - + transaction transazione - + height altezza - + unlock time tempo sbloccato - + No payments with id Nessun pagamento con id - - - + + + failed to get blockchain height: impossibile recuperare altezza blockchain: - + + + + + failed to connect to the daemon impossibile connettersi al daemon - + Transaction %llu/%llu: txid=%s Transazione %llu/%llu: txid=%s - + Input %llu/%llu: amount=%s - + failed to get output: impossibile recuperare output: - + output key's originating block height shouldn't be higher than the blockchain height l'altezza del blocco di origine della chiave di output non dovrebbe essere più alta dell'altezza della blockchain - + Originating block heights: Originando blocchi: - + | | - - + + | | - + Warning: Some input keys being spent are from Avviso: alcune chiavi di input spese vengono da - + , which can break the anonymity of ring signature. Make sure this is intentional! , che potrebbe compromettere l'anonimità della ring signature. Assicurati di farlo intenzionalmente! - - + + + Ring size must not be 0 + + + + + + ring size %u is too small, minimum is %u + + + + wrong number of arguments numero di argomenti errato - - + + + No payment id is included with this transaction. Is this okay? (Y/Yes/N/No): Nessun id pagamento è incluso in questa transazione. Questo è corretto? (S/Sì/N/No): - - + + No outputs found, or daemon is not ready Nessun output trovato, o il daemon non è pronto - - - - - failed to get random outputs to mix: - impossibile recuperare output casuali da mixare: + + Transaction successfully saved to + - - + + + , txid + + + + + Failed to save transaction to + + + + + Sweeping %s in %llu transactions for a total fee of %s. Is this okay? (Y/Yes/N/No): Sto eseguendo lo sweep di %s nelle transazioni %llu per un totale commissioni di %s. Va bene? (S/Sì/N/No): - + + + Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No): Sto eseguendo lo sweep di %s per un totale commissioni di %s. Va bene? (S/Sì/N/No): - + Donating Donando - - Loaded %lu transactions, for %s, fee %s, %s, %s, with min mixin %lu. %sIs this okay? (Y/Yes/N/No): - Caricate %lu transazioni, per %s, commissioni %s, %s, %s, con mixaggio %lu. %sQuesto è corretto? (S/Sì/N/No): - - - + This is a watch only wallet Questo è un portafoglio solo-vista - + usage: show_transfer <txid> uso: show_transfer <txid> - + + Double spend seen on the network: this transaction may or may not end up being mined + + + + Transaction ID not found ID transazione non trovato - + true vero - + failed to parse refresh type impossibile fare il parsing del tipo di refresh - - + + wallet is watch-only and has no seed il portafoglio è solo-vista e non possiede un seed - - + + wallet is non-deterministic and has no seed il portafoglio è non-deterministico e non possiede un seed - - + + wallet is watch-only and cannot transfer il portafoglio è solo-vista e non può eseguire trasferimenti - - - - mixin must be an integer >= 2 - mixin deve essere un integrale >= 2 - - - - could not change default mixin - impossibile cambiare mixin standard - - - + could not change default priority impossibile cambiare priorità standard - - Synchronize transactions and balance - Sincronizzare transazioni e bilancio - - - - incoming_transfers [available|unavailable] - Show incoming transfers, all or filtered by availability - incoming_transfers [available|unavailable] - Mostra trasferimenti in entrata, tutti o filtrati per disponibilità - - - - payments <PID_1> [<PID_2> ... <PID_N>] - Show payments for given payment ID[s] - payments <PID_1> [<PID_2> ... <PID_N>] - Mostra pagamenti per gli/l' ID fornito/i - - - - transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) - transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> è la priorità della transazione. Maggiore è la priorità, maggiori saranno le tasse per la transazione. Valori validi in ordini di priorità (dal più basso al più alto) sono:unimportant, normal, elevated, priority. se omesso, verrà usato il valore standard (vedi il comando "set priority"). <mixin_count> è il numero di inputs extra da inludere per intracciabilità. Puoi eseguire pagamenti multipli in una volta aggiungendo <address_2> <amount_2> etcetera (prima dell' ID pagamento, se incluso) - - - - locked_transfer [<mixin_count>] <addr> <amount> <lockblocks>(Number of blocks to lock the transaction for, max 1000000) [<payment_id>] - locked_transfer [<mixin_count>] <addr> <amount> <lockblocks>(Numero di blocchi durante i quali bloccare la transazione, max 1000000) [<payment_id>] - - - - Send all unmixable outputs to yourself with mixin 0 - Manda tutti gli outputs non spendibili a te stesso con mixaggio 0 - - - - Sign a transaction from a file - Firma una transazione da file - - - - Submit a signed transaction from a file - Invia una transazione firmata da file - - - - integrated_address [PID] - Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID - integrated_address [PID] - Codifica un ID pagamento in un indirizzo integrato per l'indirizzo pubblico del portafoglio corrente (nessun parametro usa un payment ID casuale), oppure decodifica un indirizzo integrato in indirizzo standard e payment ID - - - - Save wallet data - Salva i dati del portafoglio - - - - Save a watch-only keys file - Salva una chiave solo-vista - - - - Display private view key - Visualizza chiave di visualizzazione privata - - - - Display private spend key - Visualizza chiave di spesa privata - - - - Display Electrum-style mnemonic seed - Visualizza il seed mnemonico in stile Electrum - - - - Available options: seed language - set wallet seed language; always-confirm-transfers <1|0> - whether to confirm unsplit txes; print-ring-members <1|0> - whether to print detailed information about ring members during confirmation; store-tx-info <1|0> - whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference; default-mixin <n> - set default mixin (default is 4); auto-refresh <1|0> - whether to automatically sync new blocks from the daemon; refresh-type <full|optimize-coinbase|no-coinbase|default> - set wallet refresh behaviour; priority [0|1|2|3|4] - default/unimportant/normal/elevated/priority fee; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - set default monero (sub-)unit; min-outputs-count [n] - try to keep at least that many outputs of value at least min-outputs-value; min-outputs-value [n] - try to keep at least min-outputs-count outputs of at least that value; merge-destinations <1|0> - whether to merge multiple payments to the same destination address - Opzioni disponibili: seed language - seleziona lingua del seed per il portafoglio; always-confirm-transfers <1|0> - se confermare unsplit txes; print-ring-members <1|0> - se mostrare informazioni dettagliate sui ring members durante le conferme; store-tx-info <1|0> - se salvare le informazioni tx in uscita (indirizzo di destinazione, payment ID, chiave tx segreta) per riferimento futuro; default-mixin <n> - imposta default mixin (default è 4); auto-refresh <1|0> - se sincronizzare automaticamente i nuovi blocchi dal daemon; refresh-type <full|optimize-coinbase|no-coinbase|default> - imposta modalità wallet refresh; priority [0|1|2|3|4] - default/unimportant/normal/elevated/priority fee; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - imposta default monero (sub-)unit; min-outputs-count [n] - cerca di mantenere come minimo tanti outputs quanti il valore di min-outputs-value; min-outputs-value [n] - cerca di mantenere i min-outputs-count outputs come minimo a questo valore; merge-destinations <1|0> - se fondere pagamenti multipli allo stessp indirizzo di destinazione - - - - Rescan blockchain for spent outputs - Riscannerizza blockchain in cerca di outputs spesi - - - - Get transaction key (r) for a given <txid> - Ricevi una chiave transazione (r) per ogni <txid> - - - - Check amount going to <address> in <txid> - Controlla l'ammontare che va da <address> a <txid> - - - - unspent_outputs [<min_amount> <max_amount>] - Show unspent outputs within an optional amount range - unspent_outputs [<min_amount> <max_amount>] - Mostra gli outputs non spesi entro un intervallo di valori opzionale - - - - Rescan blockchain from scratch - Avvia scansione blockchain dal principio - - - - Set an arbitrary string note for a txid - Imposta una stringa arbitraria per un txid - - - - Get a string note for a txid - Ricevi una stringa di annotazione per un txid - - - - Show wallet status information - Visualizza informazioni sulla stato del portafoglio - - - - Sign the contents of a file - Firma il contenuto di un file - - - - Verify a signature on the contents of a file - Verifica firma sul contesto del file - - - - Export a signed set of key images - Esporta un set di chiavi firmate - - - - Import signed key images list and verify their spent status - Importa immagine firmata della lista chiavi e verifica lo status degli spesi - - - - Export a set of outputs owned by this wallet - Esporta un set di outputs posseduti da questo portafoglio - - - - Import set of outputs owned by this wallet - Importa un set di outputs posseduti da questo portafoglio - - - + full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) completo (più lento, nessuna ipotesi); optimize-coinbase (veloce, ipotizza che l'intero coinbase viene pagato ad un indirizzo singolo); no-coinbase (il più veloce, ipotizza di non ricevere una transazione coinbase), default (come optimize-coinbase) - + monero, millinero, micronero, nanonero, piconero monero, millinero, micronero, nanonero, piconero - + Wallet name not valid. Please try again or use Ctrl-C to quit. Nome del portafoglio non valido. Prova di nuovo o usa Ctrl-C per uscire - + Wallet and key files found, loading... Portafoglio e chiavi trovate, sto caricando... - + Key file found but not wallet file. Regenerating... Ho trovato la chiave ma non il portafoglio. Sto rigenerando... - + Key file not found. Failed to open wallet: Chiave non trovata. Impossibile aprire portafoglio: - + Generating new wallet... Sto generando un nuovo portafoglio... - - can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-json="jsonfilename" and --generate-from-keys="wallet_name" - non puoi specificare più di un --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-json="jsonfilename" e --generate-from-keys="wallet_name" - - - - can't specify both --restore-deterministic-wallet and --non-deterministic - impossibile specificare sia --restore-deterministic-wallet che --non-deterministic - - - + --restore-deterministic-wallet uses --generate-new-wallet, not --wallet-file --restore-deterministic-wallet usa --generate-new-wallet, non --wallet-file - + Electrum-style word list failed verification La lista di parole stile Electrum ha fallito la verifica - - - - - + + + + + + + + + + No data supplied, cancelled Nessun dato fornito, cancellato - - - - - - - - - + + + + + + + + + + + + failed to parse address impossibile fare il parsing dell'indirizzo - - + + failed to parse view key secret key impossibile fare il parsing chiave di visualizzazione chiave segreta - - + + failed to verify view key secret key impossibile verificare chiave di visualizzazione chiave segreta - - + + + view key does not match standard address la chiave di visualizzazione non corrisponde all'indirizzo standard - - - + + + + + account creation failed creazione dell'account fallita - + + + failed to parse spend key secret key impossibile fare il parsing chiave di spesa chiave segreta - + + failed to verify spend key secret key impossibile verificare chiave di spesa chiave segreta - + + spend key does not match standard address la chiave di spesa non corrisponde all'indirizzo standard - + specify a wallet path with --generate-new-wallet (not --wallet-file) specifica un percorso per il portafoglio con --generate-new-wallet (non --wallet-file) - + failed to open account impossibile aprire account - - - - - + + + + + wallet is null il portafoglio è nullo - - Daemon either is not started or wrong port was passed. Please make sure daemon is running or restart the wallet with the correct daemon address. - Il daemon non è partito o è settato con la porta sbagliata. Assicurati che il daemon stia funzionando o fai ripartire il wallet con l'indirizzo corretto del daemon - - - - + + invalid language choice entered. Please try again. linguaggio selezionato scorretto. Prova di nuovo. - + View key: Chiave di visualizzazione: - - Your wallet has been generated! -To start synchronizing with the daemon, use the "refresh" command. -Use the "help" command to see the list of available commands. -Always use the "exit" command when closing monero-wallet-cli to save -your current session's state. Otherwise, you might need to synchronize -your wallet again (your wallet keys are NOT at risk in any case). - - Il tuo portafoglio è stato generato! -Per iniziare a sincronizzarlo con il daemon, usa il comando "refresh". -Usa il comando "help" per vedere la lista dei comandi disponibili. -Usa sempre il comando "exit" quando chiudi monero-wallet-cli per salvare -lo stato della tua sessione 's corrente. Altrimenti potresti dover sincronizzare -di nuovo il tuo portafoglio (le chiavi del tuo portafoglio NON sono a rischio in sessun caso). - - - + You may want to remove the file "%s" and try again Potresti voler rimuovere il file "%s" e provare di nuovo - + failed to deinitialize wallet deinizializzazione portafoglio fallita - - + + + this command requires a trusted daemon. Enable with --trusted-daemon questo comando richiede un daemon fidato. Abilita questa opzione con --trusted-daemon - + blockchain can't be saved: impossibile salvare la blockchain: - - - - - + + daemon is busy. Please try again later. il daemon è impegnato. Prova più tardi - - - - - + + no connection to daemon. Please make sure daemon is running. nessuna connessione con il daemon. Assicurati che sia in funzione - + refresh error: errore refresh: - + Balance: Bilancio: - + pubkey pubkey - + key image immagine chiave - - + + unlocked sbloccato - + ringct ringct - + T T - + F F - + locked bloccato - + RingCT RingCT - + - - - + payment ID has invalid format, expected 16 or 64 character hex string: l'id pagamento è in un formato invalido, dovrebbe essere una stringa hex di 16 o 64 caratteri - + failed to get spent status impossibile recuperare status spesi - + the same transaction la stessa transazione - + blocks that are temporally very close i blocchi che sono temporalmente molto vicini - + Locked blocks too high, max 1000000 (˜4 yrs) I blocchi bloccati sono troppo alti, max 1000000 (˜4 anni) - + + + Is this okay anyway? (Y/Yes/N/No): + + + + + There is currently a %u block backlog at that fee level. Is this okay? (Y/Yes/N/No): + + + + + Failed to check for backlog: + + + + + + +Transaction + + + + + + Spending from address index %d + + + + + + + WARNING: Outputs of multiple addresses are being used together, which might potentially compromise your privacy. + + + + + + failed to parse Payment ID + + + + + usage: sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] + + + + + failed to parse key image + + + + + No outputs found + + + + + Multiple transactions are created, which is not supposed to happen + + + + + The transaction uses multiple or no inputs, which is not supposed to happen + + + + missing threshold amount manca la soglia massima dell'ammontare - + invalid amount threshold ammontare soglia invalido - + + donations are not enabled on the testnet + + + + + usage: donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] + + + + Change goes to more than one address Il cambiamento va a più di un indirizzo - - usage: get_tx_proof <txid> <dest_address> [<tx_key>] - uso: get_tx_proof <txid> <dest_address> [<tx_key>] - - - - failed to parse tx_key - impossibile fare il parsing del tx_key - - - - Tx secret key was found for the given txid, but you've also provided another tx secret key which doesn't match the found one. - Una chiave tx segreta è stata trovata per il txid fornito, ma hai anche fornito un'altra chiave segreta tx che non corrsisponde a quella trovata. - - - - Tx secret key wasn't found in the wallet file. Provide it as the optional third parameter if you have it elsewhere. - Chiave segreta tx non trovata nel file del portafoglio. Forniscila come terzo parametro opzionale se la conservi da qualche altra parte. - - - - Signature: - Firma: - - - - usage: check_tx_proof <txid> <address> <signature> - uso: check_tx_proof <txid> <address> <signature> - - - - Signature header check error - Errore controllo firma intestazione - - - - - - Signature decoding error - Errore decodificazione firma - - - - Tx pubkey was not found - Chiave pubblica tx non trovata - - - + + Good signature Firma valida - + + + Bad signature Firma invalida - - failed to generate key derivation - generazione derivazione chiave fallita - - - + usage: integrated_address [payment ID] uso: integrated_address [ID pagamento] - - Integrated address: account %s, payment ID %s - Indirizzo integrato: account %s, ID pagamento %s - - - + Standard address: Indirizzo standard: - + failed to parse payment ID or address impossibile fare il parsing di ID pagamento o indirizzo - + usage: address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] uso: address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] - + failed to parse payment ID impossibile fare il parsing di ID pagamento - + failed to parse index impossibile fare il parsing dell'indice - + Address book is empty. La rubrica è vuota. - + Index: Indice: - + + Address: Indirizzo: - + Payment ID: ID Pagamento: - + + Description: Descrizione: - + usage: set_tx_note [txid] free text note uso: set_tx_note [txid] free text note - + usage: get_tx_note [txid] uso: get_tx_note [txid] - + usage: sign <filename> uso: sign <filename> - + wallet is watch-only and cannot sign il portafoglio è solo-vista e non può firmare - - - + + + + failed to read file impossibile leggere il file - + + usage: check_tx_proof <txid> <address> <signature_file> [<message>] + + + + + + + failed to load signature file + + + + + usage: get_spend_proof <txid> [<message>] + + + + + wallet is watch-only and cannot generate the proof + + + + + usage: check_spend_proof <txid> <signature_file> [<message>] + + + + + usage: get_reserve_proof (all|<amount>) [<message>] + + + + + The reserve proof can be generated only by a full wallet + + + + + usage: check_reserve_proof <address> <signature_file> [<message>] + + + + + Address must not be a subaddress + + + + + Good signature -- total: %s, spent: %s, unspent: %s + + + + + usage: show_transfers [in|out|all|pending|failed] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] + + + + + [Double spend seen on the network: this transaction may or may not end up being mined] + + + + + usage: unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] + + + + + There is no unspent output in the specified address + + + + + (no daemon) + + + + + (out of sync) + + + + + (Untitled account) + + + + + + + + + + failed to parse index: + + + + + + specify an index between 0 and + + + + + usage: + account + account new <label text with white spaces allowed> + account switch <index> + account label <index> <label text with white spaces allowed> + account tag <tag_name> <account_index_1> [<account_index_2> ...] + account untag <account_index_1> [<account_index_2> ...] + account tag_description <tag_name> <description> + + + + + +Grand total: + Balance: + + + + + , unlocked balance: + + + + + Untagged accounts: + + + + + Tag %s is unregistered. + + + + + Accounts with tag: + + + + + Tag's description: + + + + + Account + + + + + %c%8u %6s %21s %21s %21s + + + + + ---------------------------------------------------------------------------------- + + + + + %15s %21s %21s + + + + + Primary address + + + + + (used) + + + + + (Untitled address) + + + + + <index_min> is already out of bound + + + + + <index_max> exceeds the bound + + + + + usage: address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed> ] + + + + + + Integrated addresses can only be created for account 0 + + + + + Integrated address: %s, payment ID: %s + + + + + Subaddress: + + + + + usage: get_description + + + + + no description found + + + + + description found: + + + + + Filename: + + + + + Watch only + + + + + %u/%u multisig%s + + + + + Normal + + + + + Type: + + + + + Testnet: + + + + + Yes + + + + + No + + + + + This wallet is multisig and cannot sign + + + + usage: verify <filename> <address> <signature> uso: verify <filename> <address> <signature> - + Bad signature from Firma non valida da - + Good signature from Firma valida da - + usage: export_key_images <filename> uso: export_key_images <filename> - + wallet is watch-only and cannot export key images il portafoglio è solo-vista e non può esportare immagini chiave - - + + + failed to save file impossibile salvare file - + Signed key images exported to Chiave immagine firmata esportata in - + usage: import_key_images <filename> uso: import_key_images <filename> - + usage: export_outputs <filename> uso: export_outputs <filename> - + Outputs exported to Outputs esportati in - + usage: import_outputs <filename> uso: import_outputs <filename> - - + + + + amount is wrong: l'ammontare non è corretto: - - + expected number from 0 to deve essere un numero da 0 a - - Money successfully sent, transaction - Fondi inviati con successo, transazione - - - - no connection to daemon. Please, make sure daemon is running. - nessuna connessione con il daemon, assicurati che stia funzionando. - - - - - - - not enough outputs for specified mixin_count - non ci sono abbastanza output per lo specificato mixin_count - - - - - - - output amount - ammontare output - - - - - - - found outputs to mix - trovati outputs da mixare - - - - - - - transaction was not constructed - la transazione non è stata costruita - - - - - - - transaction %s was rejected by daemon with status: - la transazione %s è stata respinta dal daemon con status: - - - - - - - one of destinations is zero - una delle destinazioni è zero - - - - Failed to find a suitable way to split transactions - Impossibile trovare un modo corretto per dividere le transazioni - - - - - - - unknown transfer error: - errore trasferimento sconosciuto: - - - + Sweeping Eseguendo lo sweeping - - Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No) - Eseguendo lo sweeping di %s per un totale commissioni di %s. Va bene? (S/Sì/N/No) - - - - - + Money successfully sent, transaction: Fondi inviati con successo, transazione: - + %s change to %s %s cambia in %s - + no change nessun cambiamento - + + + Transaction successfully signed to file Transazione firmata con successo nel file - + usage: get_tx_key <txid> uso: get_tx_key <txid> - - - - - - - + + + + + + + + + failed to parse txid parsing txid fallito - + Tx key: Chiave Tx: - + no tx keys found for this txid nessuna chiave tx trovata per questo txid - + + usage: get_tx_proof <txid> <address> [<message>] + + + + + + + signature file saved to: + + + + + + + failed to save signature file + + + + usage: check_tx_key <txid> <txkey> <address> uso: check_tx_key <txid> <txkey> <address> - - + + failed to parse tx key impossibile fare il parsing della chiave tx - - - failed to get transaction from daemon - impossibile recuperare transazione dal daemon - - - - - failed to parse transaction from daemon - impossibile fare il parsing della transazione dal daemon - - - - - failed to validate transaction from daemon - convalida transazione dal daemon fallita - - - - - failed to get the right transaction from daemon - impossibile recuperare la corretta transazione dal daemon - - - - failed to generate key derivation from supplied parameters - impossibile generare chiave derivazione dai parametri forniti - - - + + + error: errore: - + + received ricevuto/i - + + in txid in txid - + + received nothing in txid nulla ricevuto in txid - + + WARNING: this transaction is not yet included in the blockchain! AVVISO: questa transazione non è ancora inclusa nella blockchain! - + + This transaction has %u confirmations Questa transazione ha %u conferme - + + WARNING: failed to determine number of confirmations! AVVISO: impossibile determinare il numero di conferme! - - usage: show_transfers [in|out|all|pending|failed] [<min_height> [<max_height>]] - uso: show_transfers [in|out|all|pending|failed] [<min_height> [<max_height>]] - - - + bad min_height parameter: parametro min_height non corretto: - + bad max_height parameter: parametro max_height non corretto: - + in in - - + + out out - + failed fallito - + pending in attesa - - usage: unspent_outputs [<min_amount> <max_amount>] - uso: unspent_outputs [<min_amount> <max_amount>] - - - + <min_amount> should be smaller than <max_amount> <min_amount> dovrebbe essere più piccolo di <max_amount> - + Amount: Ammontare: - + , number of keys: , numero di chiavi: - + - + Min block height: Altezza minima blocco: - + Max block height: Altezza massima blocco: - + Min amount found: Ammontare minimo trovato: - + Max amount found: Ammontare massimo trovato: - + Total count: Conto totale: - + Bin size: Dimensione Bin: - + Outputs per *: - + count ^ - + | | - + + + - + +--> block height - + ^ ^ - + ^ ^ - + - + wallet portafoglio - - + + Random payment ID: ID pagamento casuale: - + Matching integrated address: Indirizzo integrato corrispondente: + + genms + + + Base filename (-1, -2, etc suffixes will be appended as needed) + + + + + Give threshold and participants at once as M/N + + + + + How many participants wil share parts of the multisig wallet + + + + + How many signers are required to sign a valid transaction + + + + + Create testnet multisig wallets + + + + + Generating %u %u/%u multisig wallets + + + + + Error verifying multisig extra info + + + + + Error finalizing multisig + + + + + Generated multisig wallets for address + + + + + Error creating multisig wallets: + + + + + This program generates a set of multisig wallets - use this simpler scheme only if all the participants trust each other + + + + + Error: expected N/M, but got: + + + + + + Error: either --scheme or both of --threshold and --participants may be given + + + + + Error: expected N > 1 and N <= M, but got N==%u and M==%d + + + + + Error: --filename-base is required + + + + + Error: unsupported scheme: only N/N and N-1/N are supported + + + sw - + Generate new wallet and save it to <arg> Genera un nuovo portafoglio e salvalo in <arg> - + Generate incoming-only wallet from view key Genera un portafoglio solo-ricezione da chiave di visualizzazione + + + Generate deterministic wallet from spend key + + Generate wallet from private keys Genera portafoglio da chiavi private - + + Generate a master wallet from multisig wallet keys + + + + + Language for mnemonic + + + + Specify Electrum seed for wallet recovery/creation Specifica il seed stile Electrum per recuperare/creare il portafoglio - + Recover wallet using Electrum-style mnemonic seed Recupera portafoglio usando il seed mnemonico stile-Electrum - + + Recover multisig wallet using Electrum-style mnemonic seed + + + + Generate non-deterministic view and spend keys Crea chiavi di visualizzione e chiavi di spesa non-deterministiche - + Enable commands which rely on a trusted daemon Abilita comandi dipendenti da un daemon fidato - + Allow communicating with a daemon that uses a different RPC version Permetti comunicazioni con un daemon che usa una versione RPC differente - + Restore from specific blockchain height Ripristina da specifico blocco - + + The newly created transaction will not be relayed to the monero network + + + + daemon is busy. Please try again later. il daemon è occupato. Prova più tardi. - + possibly lost connection to daemon possibile perdita di connessione con il daemon - + Error: Errore: - + + This is the command line monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Failed to initialize wallet Inizializzazione wallet fallita - - tools::dns_utils - - - DNSSEC validation passed - Convalida DNSSEC passata - - - - WARNING: DNSSEC validation was unsuccessful, this address may not be correct! - AVVISO: convalida DNSSEC fallita, questo indirizzo potrebbe non essere corretto! - - - - For URL: - Per URL: - - - - Monero Address = - Indirizzo Monero = - - - - Is this OK? (Y/n) - Va bene? (S/n) - - - - you have cancelled the transfer request - hai cancellato la richiesta di transferimento - - tools::wallet2 - + Use daemon instance at <host>:<port> Usa instanza daemon in <host>:<port> - + Use daemon instance at host <arg> instead of localhost Usa istanza daemon all'host <arg> invece che localhost - - Wallet password - Password portafoglio - - - + Wallet password file File password portafoglio - + Use daemon instance at port <arg> instead of 18081 Usa istanza daemon alla porta <arg> invece che alla 18081 - + For testnet. Daemon must also be launched with --testnet flag Per testnet. Il daemon può anche essere lanciato con la flag --testnet - + Restricts to view-only commands Restringi a comandi di tipo solo-vista - + can't specify daemon host or port more than once non puoi specificare la porta o l'host del daemon più di una volta - + can't specify more than one of --password and --password-file non puoi specificare più di un --password e --password-file - + the password file specified could not be read il file password specificato non può essere letto - - Enter new password for the wallet - Inserisci una nuova password per il portafoglio - - - - failed to read wallet password - impossibile leggere password portafoglio - - - + Failed to load file Impossibile caricare file - + Wallet password (escape/quote as needed) Wallet password (escape/quote se necessario) - + Specify username[:password] for daemon RPC client Specificare username[:password] per client del daemon RPC - + + no password specified; use --prompt-for-password to prompt for a password + + + + Failed to parse JSON Impossibile fare il parsing di JSON - + Version %u too new, we can only grok up to %u La versione %u è troppo recente, possiamo comprendere solo fino alla versione %u - + failed to parse view key secret key impossibile fare il parsing di chiave di visualizzazione chiave segreta - - - + + + failed to verify view key secret key impossibile verificare chiave di visualizzazione chiave segreta - + failed to parse spend key secret key impossibile fare il parsing chiave di spesa chiave segreta - - - + + + failed to verify spend key secret key impossibile verificare chiave di spesa chiave segreta - + Electrum-style word list failed verification Verifica lista di parole stile-Electrum fallita - - At least one of Electrum-style word list and private view key must be specified - Almeno una parola della lista stile-Electrum e una chiave privata di visualizzazione devono essere specificate + + At least one of Electrum-style word list and private view key and private spend key must be specified + - + Both Electrum-style word list and private key(s) specified Specificate entrambe lista parole stile-Electrum e chiave/i privata/e - + invalid address indirizzo invalido - + view key does not match standard address la chiave di visualizzazione non corrisponde all'indirizzo standard - + spend key does not match standard address la chiave di spesa non corrisponde all'indirizzo standard - + Cannot generate deprecated wallets from JSON Impossibile creare portafogli disapprovati da JSON - + + failed to parse address: + + + + + Address must be specified in order to create watch-only wallet + + + + failed to generate new wallet: impossibile generare nuovo portafoglio: - + + + + + + + + + Primary account + + + + + No funds received in this tx. + + + + failed to read file lettura file fallita @@ -2618,94 +3888,125 @@ Outputs per *: tools::wallet_rpc_server - + Daemon is local, assuming trusted Il daemon è locale, viene considerato fidato - + + Failed to create directory + + + + + Failed to create directory %s: %s + + + + Cannot specify -- Impossibile specificare -- - + and -- e -- - + Failed to create file Impossibile creare file - + . Check permissions or remove file . Controlla permessi o rimuovi il file - + Error writing to file Errore durante scrittura su file - + RPC username/password is stored in file Username/password RPC conservato nel file - + + Tag %s is unregistered. + + + + + Transaction not possible. Available only %s, transaction amount %s = %s + %s (fee) + + + + + This is the RPC monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Can't specify more than one of --wallet-file and --generate-from-json Non puoi specificare più di un --wallet-file e --generate-from-json - + Must specify --wallet-file or --generate-from-json or --wallet-dir Devi specificare --wallet-file o --generate-from-json o --wallet-dir - + Loading wallet... Sto caricando il portafoglio... - - + + Saving wallet... Sto salvando il portafoglio... - - - Saved ok - Salvato con successo + + + Successfully saved + - - Loaded ok - Caricato con successo + + Successfully loaded + - + Wallet initialization failed: Inizializzazione portafoglio fallita: - + Failed to initialize wallet RPC server Inizializzazione server RPC portafoglio fallita - + Starting wallet RPC server Server RPC portafoglio in avvio - + + Failed to run wallet: + + + + Stopped wallet RPC server Server RPC portafoglio arrestato - + Failed to save wallet: Impossibile salvare portafoglio: @@ -2713,58 +4014,65 @@ Outputs per *: wallet_args - - + + + Wallet options Opzioni portafoglio - + Generate wallet from JSON format file Genera portafoglio da file JSON - + Use wallet <arg> Usa portafoglio <arg> - + Max number of threads to use for a parallel job Numero massimo di threads da utilizzare per un lavoro parallelo - + Specify log file Specificare file di log - + Config file File configurazione - + General options Opzioni generali - + + This is the command line monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Can't find config file Impossibile trovare file configurazione - + Logging to: Sto salvando il Log in: - + Logging to %s Sto salvando il Log in %s - + Usage: Uso: diff --git a/translations/monero_sv.ts b/translations/monero_sv.ts index 7decd2f5a..6b461c102 100644 --- a/translations/monero_sv.ts +++ b/translations/monero_sv.ts @@ -1,27 +1,27 @@ - - + + Monero::AddressBookImpl - + Invalid destination address Ogiltig måladress - + Invalid payment ID. Short payment ID should only be used in an integrated address Ogiltigt betalnings-ID. Kort betalnings-ID ska endast användas i en integrerad adress - + Invalid payment ID Ogiltigt betalnings-ID - - Integrated address and long payment id can't be used at the same time - Integrerad adress och långt betalnings-ID kan inte användas samtidigt + + Integrated address and long payment ID can't be used at the same time + @@ -37,32 +37,32 @@ Det gick inte att skriva transaktioner till fil - + daemon is busy. Please try again later. daemonen är upptagen. Försök igen senare. - + no connection to daemon. Please make sure daemon is running. ingen anslutning till daemonen. Se till att daemonen körs. - + transaction %s was rejected by daemon with status: transaktionen %s avvisades av daemonen med status: - + . Reason: . Orsak: - + Unknown exception: Okänt undantag: - + Unhandled exception Ohanterat undantag @@ -81,323 +81,324 @@ Det gick inte att signera transaktionen - + Claimed change does not go to a paid address Begärd växel går inte till en betald adress - + Claimed change is larger than payment to the change address Begärd växel är större än betalning till växeladressen - + Change goes to more than one address Växel går till mer än en adress - + sending %s to %s skickar %s till %s - + with no destinations utan några mål - + %s change to %s %s växel till %s - + no change ingen växel - - Loaded %lu transactions, for %s, fee %s, %s, %s, with min mixin %lu. %s - Läste in %lu transaktioner, för %s, avgift %s, %s, %s, med minsta mixin %lu. %s + + Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu. %s + Monero::WalletImpl - + payment id has invalid format, expected 16 or 64 character hex string: betalnings-ID har ogiltigt format. En 16- eller 64-teckens hex-sträng förväntades: - + Failed to add short payment id: Det gick inte att lägga till kort betalnings-ID: - - + + daemon is busy. Please try again later. daemonen är upptagen. Försök igen senare. - - + + no connection to daemon. Please make sure daemon is running. ingen anslutning till daemonen. Se till att daemonen körs. - - + + RPC error: RPC-fel: - + + + not enough outputs for specified ring size + + + + + + found outputs to use + + + + + Please sweep unmixable outputs. + + + + failed to get random outputs to mix det gick inte att hämta slumpmässiga utgångar att mixa - - + + not enough money to transfer, available only %s, sent amount %s inte tillräckligt med pengar för överföring, endast tillgängligt %s, skickat belopp %s - + failed to parse address det gick inte att parsa adressen - + failed to parse secret spend key det gick inte att parsa hemlig spendernyckel - + No view key supplied, cancelled Ingen visningsnyckel angiven, avbruten - + failed to parse secret view key det gick inte att parsa hemlig visningsnyckel - + failed to verify secret spend key det gick inte att verifiera hemlig spendernyckel - + spend key does not match address spendernyckel matchar inte adress - + failed to verify secret view key det gick inte att verifiera hemlig visningsnyckel - + view key does not match address visningsnyckel matchar inte adress - + failed to generate new wallet: det gick inte att skapa ny plånbok: - + + Failed to send import wallet request + + + + Failed to load unsigned transactions Det gick inte att läsa in osignerade transaktioner - + Failed to load transaction from file Det gick inte att läsa in transaktion från fil - + Wallet is view only Plånboken är endast för granskning - + failed to save file det gick inte att spara fil - + + Key images can only be imported with a trusted daemon + + + + Failed to import key images: det gick inte att importera nyckelavbildningar: - + + Failed to get subaddress label: + + + + + Failed to set subaddress label: + + + + failed to get random outputs to mix: %s det gick inte att hitta slumpmässiga utgångar att mixa: %s - - + + + not enough money to transfer, overall balance only %s, sent amount %s + + + + + not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee) ej tillräckligt med pengar för överföring, endast tillgängligt %s, transaktionsbelopp %s = %s + %s (avgift) - - - not enough outputs for specified mixin_count - inte tillräckligt många utgångar för angiven mixin_count - - - - + + output amount utgångens belopp - - - found outputs to mix - hittade utgångar att mixa - - - - + + transaction was not constructed transaktionen konstruerades inte - - + + transaction %s was rejected by daemon with status: transaktionen %s avvisades av daemonen med status: - - + + one of destinations is zero ett av målen är noll - - + + failed to find a suitable way to split transactions det gick inte att hitta ett lämpligt sätt att dela upp transaktioner - - + + unknown transfer error: okänt överföringsfel: - - + + internal error: internt fel: - - + + unexpected error: oväntat fel: - - + + unknown error okänt fel - + + + + + + + Failed to parse txid + + + + + no tx keys found for this txid + inga tx-nycklar kunde hittas för detta txid + + + + + Failed to parse tx key + + + + + + + + Failed to parse address + Det gick inte att parsa adressen + + + + Address must not be a subaddress + + + + Rescan spent can only be used with a trusted daemon Genomsök efter spenderade kan endast användas med en betrodd daemon - - Monero::WalletManagerImpl - - - failed to parse txid - det gick inte att parsa transaktions-id - - - - - failed to parse tx key - det gick inte att parsa transaktionsnyckeln - - - - failed to parse address - det gick inte att parsa adressen - - - - failed to get transaction from daemon - det gick inte att hämta transaktion från daemon - - - - failed to parse transaction from daemon - det gick inte att parsa transaktion från daemonen - - - - failed to validate transaction from daemon - det gick inte att validera transaktion från daemon - - - - failed to get the right transaction from daemon - det gick inte att hämta rätt transaktion från daemonen - - - - failed to generate key derivation from supplied parameters - det gick inte att skapa nyckelhärledning från angivna parametrar - - - - error: - fel: - - - - received - mottaget - - - - in txid - i transaktions-id - - - - received nothing in txid - tog emot ingenting i transaktions-id - - Wallet - + Failed to parse address Det gick inte att parsa adressen - + Failed to parse key Det gick inte att parsa nyckeln - + failed to verify key det gick inte att verifiera nyckeln - + key does not match address nyckeln matchar inte adressen @@ -405,1911 +406,3080 @@ command_line - + yes ja + + + no + + cryptonote::rpc_args - - Specify ip to bind rpc server - Ange IP-adress för att binda till RPC-server + + Specify IP to bind RPC server + - + Specify username[:password] required for RPC server Ange användarnamn[:lösenord] som krävs av RPC-servern - + Confirm rpc-bind-ip value is NOT a loopback (local) IP Bekräftelsevärde för rpc-bind-ip är INTE ett lokalt (loopback) IP - + + Specify a comma separated list of origins to allow cross origin resource sharing + + + + Invalid IP address given for -- Ogiltig IP-adress angiven för -- - + permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with -- tillåter inkommande okrypterade externa anslutningar. Överväg att använda SSH-tunnel eller SSL-proxy istället. Åsidosätt med -- - + Username specified with -- Användarnamn angivet med -- - + + cannot be empty kan inte vara tomt + + + requires RFC server password -- + + cryptonote::simple_wallet - + Commands: Kommandon: - + failed to read wallet password det gick inte att läsa lösenord för plånboken - + invalid password ogiltigt lösenord - - start_mining [<number_of_threads>] - Start mining in daemon - start_mining [<antal_trådar>] - Starta brytning i daemonen - - - - Stop mining in daemon - Avbryt brytning i daemonen - - - - Save current blockchain data - Spara aktuella blockkedje-data - - - - Show current wallet balance - Visa aktuellt saldo för plånboken - - - - Show blockchain height - Visa blockkedjans höjd - - - - Show current wallet public address - Visa plånbokens aktuella öppna adress - - - - Show this help - Visa denna hjälp - - - + set seed: needs an argument. available options: language set seed: behöver ett argument. tillgängliga alternativ: språk - + set: unrecognized argument(s) set: okända argument - + wallet file path not valid: ogiltig sökväg till plånbok: - + Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting. Försöker skapa eller återställa plånbok, men angivna filer existerar. Avslutar för att inte riskera att skriva över någonting. - + usage: payment_id användning: payment_id - - sweep_below <amount_threshold> [mixin] address [payment_id] - Send all unlocked outputs below the threshold to an address - sweep_below <tröskelbelopp> [mixin] <adress> [<betalnings_ID>] - Skicka alla upplåsta utgångar under tröskelbeloppet till en adress - - - - Generate a new random full size payment id - these will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids - Skapa ett nytt slumpmässigt betalnings-ID av full storlek - dessa kommer att vara okrypterade på blockkedjan, se integrated_address för krypterade korta betalnings-ID - - - + needs an argument kräver ett argument - - - - - - - + + + + + + + + + + 0 or 1 0 eller 1 - - integer >= 2 - heltal >= 2 - - - + 0, 1, 2, 3, or 4 0, 1, 2, 3 eller 4 - + + unsigned integer positivt heltal - + NOTE: the following 25 words can be used to recover access to your wallet. Write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control. OBSERVERA: följande 25 ord kan användas för att återfå tillgång till din plånbok. Skriv ner och spara dem på ett säkert ställe. Spara dem inte i din e-post eller på något lagringsutrymme som du inte har direkt kontroll över. - + --restore-deterministic-wallet uses --generate-new-wallet, not --wallet-file --restore-deterministic-wallet använder --generate-new-wallet, inte --wallet-file - + specify a recovery parameter with the --electrum-seed="words list here" ange en återställningsparameter med --electrum-seed="ordlista här" - + specify a wallet path with --generate-new-wallet (not --wallet-file) ange sökväg till en plånbok med --generate-new-wallet (inte --wallet-file) - + wallet failed to connect to daemon: plånboken kunde inte ansluta till daemonen: - + Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version. Daemonen använder en högre version av RPC (%u) än plånboken (%u): %s. Antingen uppdatera en av dem, eller använd --allow-mismatched-daemon-version. - + List of available languages for your wallet's seed: Lista över tillgängliga språk för din plånboks frö: - + Enter the number corresponding to the language of your choice: Ange det tal som motsvarar det språk du vill använda: - + You had been using a deprecated version of the wallet. Please use the new seed that we provide. Du hade använt en inaktuell version av plånboken. Använd det nya frö som vi tillhandahåller. - - + + Generated new wallet: Ny plånbok skapad: - - + + + failed to generate new wallet: det gick inte att skapa ny plånbok: - + Opened watch-only wallet Öppnade plånbok för granskning - + Opened wallet Öppnade plånbok - + You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet. Du hade använt en inaktuell version av plånboken. Fortsätt för att uppgradera din plånbok. - + You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now. Du hade använt en inaktuell version av plånboken. Plånbokens filformat kommer nu att uppgraderas. - + failed to load wallet: det gick inte att läsa in plånboken: - + Use the "help" command to see the list of available commands. Använd kommandot "help" för att se en lista över tillgängliga kommandon. - + Wallet data saved Plånboksdata sparades - + Mining started in daemon Brytning startad i daemonen - + mining has NOT been started: brytning har INTE startats: - + Mining stopped in daemon Brytning stoppad i daemonen - + mining has NOT been stopped: brytning har INTE stoppats: - + Blockchain saved Blockkedjan sparad - - - + + + Height Höjd - - - + transaction transaktion - - received - mottaget - - - + spent spenderad - + unsupported transaction format transaktionsformatet stöds inte - + Starting refresh... Startar uppdatering … - + Refresh done, blocks received: Uppdatering färdig, mottagna block: - - + + payment id has invalid format, expected 16 or 64 character hex string: betalnings-ID har ogiltigt format. En 16- eller 64-teckens hex-sträng förväntades: - + bad locked_blocks parameter: dålig parameter för locked_blocks: - - + + + a single transaction cannot use more than one payment id: en enstaka transaktion kan inte använda mer än ett betalnings-ID: - - + + + + failed to set up payment id, though it was decoded correctly det gick inte att upprätta betalnings-ID, trots att det avkodades korrekt - - - - - + + + + + + + + transaction cancelled. transaktion avbröts. - + + + Is this okay anyway? (Y/Yes/N/No): + + + + + There is currently a %u block backlog at that fee level. Is this okay? (Y/Yes/N/No): + + + + + Failed to check for backlog: + + + + + + +Transaction + + + + + + Spending from address index %d + + + + + + + WARNING: Outputs of multiple addresses are being used together, which might potentially compromise your privacy. + + + + + Sending %s. Skickar %s. - + Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s Transaktionen behöver delas upp i %llu transaktioner. Detta kommer att göra att en transaktionsavgift läggs till varje transaktion, med ett totalt belopp på %s - + The transaction fee is %s Transaktionsavgiften är %s - + , of which %s is dust from change , varav %s är damm från växel - + . . - + A total of %s from dust change will be sent to dust address Ett total belopp på %s från växeldamm kommer att skickas till damm-adressen - + . This transaction will unlock on block %llu, in approximately %s days (assuming 2 minutes per block) . Denna transaktion kommer att låsas upp vid block %llu, om ungefär %s dagar (förutsatt en blocktid på 2 minuter) - - - + + + + + + + + Failed to write transaction(s) to file Det gick inte att skriva transaktioner till fil - - - + + + + + + + + Unsigned transaction(s) successfully written to file: Osignerade transaktioner skrevs till fil: - - - - - Not enough money in unlocked balance - Inte tillräckligt med pengar i upplåst saldo - - - - - - - Failed to find a way to create transactions. This is usually due to dust which is so small it cannot pay for itself in fees, or trying to send more money than the unlocked balance, or not leaving enough for fees - Det gick inte att hitta något sätt att skapa transaktioner. Detta beror vanligtvis på damm som är så litet att det inte kan betala för sig självt i avgifter, eller ett försök att skicka mer pengar än upplåst saldo, eller att inte lämna tillräckligt för att täcka avgifterna - - - - - - Reason: - Orsak: - - - - - - failed to find a suitable way to split transactions - det gick inte att hitta ett lämpligt sätt att dela upp transaktioner - - - + No unmixable outputs found Inga omixbara utgångar kunde hittas - + No address given Ingen adress har angivits - - missing amount threshold - beloppströskel saknas - - - + invalid amount threshold ogiltig beloppströskel - + Claimed change does not go to a paid address Begärd växel går inte till en betald adress - + Claimed change is larger than payment to the change address Begärd växel är större än betalning till växeladressen - + sending %s to %s skickar %s till %s - + with no destinations utan några mål - + Failed to sign transaction Det gick inte att signera transaktionen - + Failed to sign transaction: Det gick inte att signera transaktion: - + Failed to load transaction from file Det gick inte att läsa in transaktion från fil - - daemon is busy. Please try later - daemonen är upptagen. Försök senare - - - - - - - - + + RPC error: RPC-fel: - + wallet is watch-only and has no spend key plånboken är enbart för granskning och har ingen spendernyckel - + + + Your original password was incorrect. Ditt ursprungliga lösenord var fel. - + Error with wallet rewrite: Fel vid återskrivning av plånbok: - + priority must be 0, 1, 2, 3, or 4 prioritet måste vara 0, 1, 2, 3 eller 4 - - priority must be 0, 1, 2, 3,or 4 - prioritet måste vara 0, 1, 2, 3 eller 4 - - - - priority must be 0, 1, 2 3,or 4 - prioritet måste vara 0, 1, 2, 3 eller 4 - - - + invalid unit ogiltig enhet - + + invalid count: must be an unsigned integer ogiltigt värde för count: måste vara ett heltal utan tecken - + invalid value ogiltigt värde - - Same as transfer, but using an older transaction building algorithm - Samma som transfer, men använder en äldre algoritm för att bygga transaktionen + + usage: set_log <log_level_number_0-4> | <categories> + användning: set_log <loggnivå_nummer_0-4> | <kategorier> - - sweep_all [mixin] address [payment_id] - Send all unlocked balance to an address - sweep_all [mixin] adress [betalnings_id] - Skicka allt upplåst saldo till en adress - - - - donate [<mixin_count>] <amount> [payment_id] - Donate <amount> to the development team (donate.getmonero.org) - donate [<mixin_antal>] <belopp> [<betalnings_id>] - Donera <belopp> till utvecklingsteamet (donate.getmonero.org) - - - - set_log <level>|<categories> - Change current log detail (level must be <0-4>) - set_log <nivå>|<kategorier> - Ändra detaljnivån för aktuell logg (nivå måste vara 0-4) - - - - address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] - Print all entries in the address book, optionally adding/deleting an entry to/from it - address_book [(add (<adress> [pid <långt eller kort betalnings-ID>])|<integrerad adress> [<beskrivning eventuellt med blanktecken>])|(delete <index>)] - Skriv ut alla poster i adressboken, eventuellt lägg till/ta bort en post till/från den - - - - show_transfers [in|out|pending|failed|pool] [<min_height> [<max_height>]] - Show incoming/outgoing transfers within an optional height range - show_transfers [in|out|pending|failed|pool] [<min_höjd> [<max_höjd>]] - Visa inkommande/utgående överföringar inom ett valfritt höjdintervall - - - - Show information about a transfer to/from this address - Visa information om en överföring till/från denna adress - - - - Change wallet password - Ändra lösenord för plånbok - - - - usage: set_log <log_level_number_0-4> | <categories> - användning: set_log <loggnivå_nummer_0-4> | <kategorier> - - - + (Y/Yes/N/No): (J/Ja/N/Nej): - - + + bad m_restore_height parameter: dålig parameter för m_restore_height: - + date format must be YYYY-MM-DD datumformat måste vara ÅÅÅÅ-MM-DD - + Restore height is: Återställningshöjd är: - - + + Is this okay? (Y/Yes/N/No): Är detta okej? (J/Ja/N/Nej): - + Daemon is local, assuming trusted Daemonen är lokal, utgår från att den är betrodd - + Password for new watch-only wallet Lösenord för ny granskningsplånbok - - invalid arguments. Please use start_mining [<number_of_threads>] [do_bg_mining] [ignore_battery], <number_of_threads> should be from 1 to - ogiltiga argument. Använd start_mining [<antal_trådar>] [do_bg_mining] [ignore_battery], <antal_trådar> ska vara från 1 till + + invalid arguments. Please use start_mining [<number_of_threads>] [do_bg_mining] [ignore_battery], <number_of_threads> should be from 1 to + ogiltiga argument. Använd start_mining [<antal_trådar>] [do_bg_mining] [ignore_battery], <antal_trådar> ska vara från 1 till - - - - - + internal error: internt fel: - - - - - - + + + unexpected error: oväntat fel: - - - - - - + + + + + + + + + unknown error okänt fel - + refresh failed: det gick inte att att uppdatera: - + Blocks received: Mottagna block: - + unlocked balance: upplåst saldo: - - - + + + amount belopp - + + false + + + + + Unknown command: + + + + + Command usage: + + + + + Command description: + + + + + wallet is multisig but not yet finalized + + + + + Enter optional seed encryption passphrase, empty to see raw seed + + + + + Failed to retrieve seed + + + + + wallet is multisig and has no seed + + + + + Cannot connect to daemon + + + + + Current fee is %s monero per kB + + + + + Error: failed to estimate backlog array size: + + + + + Error: bad estimated backlog array size + + + + + (current) + + + + + %u block (%u minutes) backlog at priority %u%s + + + + + %u to %u block (%u to %u minutes) backlog at priority %u + + + + + No backlog at priority + + + + + + This wallet is already multisig + + + + + + wallet is watch-only and cannot be made multisig + + + + + + This wallet has been used before, please use a new wallet to create a multisig wallet + + + + + Your password is incorrect. + + + + + Send this multisig info to all other participants, then use make_multisig <threshold> <info1> [<info2>...] with others' multisig info + + + + + This includes the PRIVATE view key, so needs to be disclosed only to that multisig wallet's participants + + + + + usage: make_multisig <threshold> <multisiginfo1> [<multisiginfo2>...] + + + + + Invalid threshold + + + + + Another step is needed + + + + + Send this multisig info to all other participants, then use finalize_multisig <info1> [<info2>...] with others' multisig info + + + + + Error creating multisig: + + + + + Error creating multisig: new wallet is not multisig + + + + + multisig address: + + + + + + + This wallet is not multisig + + + + + This wallet is already finalized + + + + + usage: finalize_multisig <multisiginfo1> [<multisiginfo2>...] + + + + + Failed to finalize multisig + + + + + Failed to finalize multisig: + + + + + + + + + This multisig wallet is not yet finalized + + + + + usage: export_multisig_info <filename> + + + + + Error exporting multisig info: + + + + + Multisig info exported to + + + + + usage: import_multisig_info <filename1> [<filename2>...] - one for each other participant + + + + + Multisig info imported + + + + + Failed to import multisig info: + + + + + Failed to update spent status after importing multisig info: + + + + + Untrusted daemon, spent status may be incorrect. Use a trusted daemon and run "rescan_spent" + + + + + + + This is not a multisig wallet + + + + + usage: sign_multisig <filename> + + + + + Failed to sign multisig transaction + + + + + Multisig error: + + + + + Failed to sign multisig transaction: + + + + + It may be relayed to the network with submit_multisig + + + + + usage: submit_multisig <filename> + + + + + + Failed to load multisig transaction from file + + + + + + Multisig transaction signed by only %u signers, needs %u more signatures + + + + + + Transaction successfully submitted, transaction + + + + + + You can check its status by using the `show_transfers` command. + + + + + usage: export_raw_multisig <filename> + + + + + Failed to export multisig transaction to file + + + + + Saved exported multisig transaction file(s): + + + + + + + ring size must be an integer >= + + + + + could not change default ring size + + + + + + priority must be 0, 1, 2, 3, or 4 + prioritet måste vara 0, 1, 2, 3 eller 4 {0, 1, 2, 3,?} {4?} + + + + Invalid height + + + + + start_mining [<number_of_threads>] [bg_mining] [ignore_battery] + + + + + Start mining in the daemon (bg_mining and ignore_battery are optional booleans). + + + + + Stop mining in the daemon. + + + + + set_daemon <host>[:<port>] + + + + + Set another daemon to connect to. + + + + + Save the current blockchain data. + + + + + Synchronize the transactions and balance. + + + + + balance [detail] + + + + + Show the wallet's balance of the currently selected account. + + + + + incoming_transfers [available|unavailable] [verbose] [index=<N1>[,<N2>[,...]]] + + + + + Show the incoming transfers, all or filtered by availability and address index. + + + + + payments <PID_1> [<PID_2> ... <PID_N>] + + + + + Show the payments for the given payment IDs. + + + + + Show the blockchain height. + + + + + transfer_original [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] + + + + + Transfer <amount> to <address> using an older transaction building algorithm. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> <amount> [<payment_id>] + + + + + Transfer <amount> to <address>. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + locked_transfer [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <addr> <amount> <lockblocks> [<payment_id>] + + + + + Transfer <amount> to <address> and lock it for <lockblocks> (max. 1000000). If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) + + + + + Send all unmixable outputs to yourself with ring_size 1 + + + + + sweep_all [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] + + + + + Send all unlocked balance to an address. If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. + + + + + sweep_below <amount_threshold> [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <address> [<payment_id>] + + + + + Send all unlocked outputs below the threshold to an address. + + + + + sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] + + + + + Send a single output of the given key image to an address without change. + + + + + donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] + + + + + Donate <amount> to the development team (donate.getmonero.org). + + + + + sign_transfer <file> + + + + + Sign a transaction from a <file>. + + + + + Submit a signed transaction from a file. + + + + + set_log <level>|{+,-,}<categories> + + + + + Change the current log detail (level must be <0-4>). + + + + + account + account new <label text with white spaces allowed> + account switch <index> + account label <index> <label text with white spaces allowed> + account tag <tag_name> <account_index_1> [<account_index_2> ...] + account untag <account_index_1> [<account_index_2> ...] + account tag_description <tag_name> <description> + + + + + If no arguments are specified, the wallet shows all the existing accounts along with their balances. +If the "new" argument is specified, the wallet creates a new account with its label initialized by the provided label text (which can be empty). +If the "switch" argument is specified, the wallet switches to the account specified by <index>. +If the "label" argument is specified, the wallet sets the label of the account specified by <index> to the provided label text. +If the "tag" argument is specified, a tag <tag_name> is assigned to the specified accounts <account_index_1>, <account_index_2>, .... +If the "untag" argument is specified, the tags assigned to the specified accounts <account_index_1>, <account_index_2> ..., are removed. +If the "tag_description" argument is specified, the tag <tag_name> is assigned an arbitrary text <description>. + + + + + address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed>] + + + + + If no arguments are specified or <index> is specified, the wallet shows the default or specified address. If "all" is specified, the walllet shows all the existing addresses in the currently selected account. If "new " is specified, the wallet creates a new address with the provided label text (which can be empty). If "label" is specified, the wallet sets the label of the address specified by <index> to the provided label text. + + + + + integrated_address [<payment_id> | <address>] + + + + + Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID + + + + + address_book [(add ((<address> [pid <id>])|<integrated address>) [<description possibly with whitespaces>])|(delete <index>)] + + + + + Print all entries in the address book, optionally adding/deleting an entry to/from it. + + + + + Save the wallet data. + + + + + Save a watch-only keys file. + + + + + Display the private view key. + + + + + Display the private spend key. + + + + + Display the Electrum-style mnemonic seed + + + + + set <option> [<value>] + + + + + Available options: + seed language + Set the wallet's seed language. + always-confirm-transfers <1|0> + Whether to confirm unsplit txes. + print-ring-members <1|0> + Whether to print detailed information about ring members during confirmation. + store-tx-info <1|0> + Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference. + default-ring-size <n> + Set the default ring size (default and minimum is 5). + auto-refresh <1|0> + Whether to automatically synchronize new blocks from the daemon. + refresh-type <full|optimize-coinbase|no-coinbase|default> + Set the wallet's refresh behaviour. + priority [0|1|2|3|4] + Set the fee too default/unimportant/normal/elevated/priority. + confirm-missing-payment-id <1|0> + ask-password <1|0> + unit <monero|millinero|micronero|nanonero|piconero> + Set the default monero (sub-)unit. + min-outputs-count [n] + Try to keep at least that many outputs of value at least min-outputs-value. + min-outputs-value [n] + Try to keep at least min-outputs-count outputs of at least that value. + merge-destinations <1|0> + Whether to merge multiple payments to the same destination address. + confirm-backlog <1|0> + Whether to warn if there is transaction backlog. + confirm-backlog-threshold [n] + Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks. + refresh-from-block-height [n] + Set the height before which to ignore blocks. + auto-low-priority <1|0> + Whether to automatically use the low priority fee level when it's safe to do so. + + + + + Display the encrypted Electrum-style mnemonic seed. + + + + + Rescan the blockchain for spent outputs. + + + + + get_tx_key <txid> + + + + + Get the transaction key (r) for a given <txid>. + + + + + check_tx_key <txid> <txkey> <address> + + + + + Check the amount going to <address> in <txid>. + + + + + get_tx_proof <txid> <address> [<message>] + + + + + Generate a signature proving funds sent to <address> in <txid>, optionally with a challenge string <message>, using either the transaction secret key (when <address> is not your wallet's address) or the view secret key (otherwise), which does not disclose the secret key. + + + + + check_tx_proof <txid> <address> <signature_file> [<message>] + + + + + Check the proof for funds going to <address> in <txid> with the challenge string <message> if any. + + + + + get_spend_proof <txid> [<message>] + + + + + Generate a signature proving that you generated <txid> using the spend secret key, optionally with a challenge string <message>. + + + + + check_spend_proof <txid> <signature_file> [<message>] + + + + + Check a signature proving that the signer generated <txid>, optionally with a challenge string <message>. + + + + + get_reserve_proof (all|<amount>) [<message>] + + + + + Generate a signature proving that you own at least this much, optionally with a challenge string <message>. +If 'all' is specified, you prove the entire sum of all of your existing accounts' balances. +Otherwise, you prove the reserve of the smallest possible amount above <amount> available in your current account. + + + + + check_reserve_proof <address> <signature_file> [<message>] + + + + + Check a signature proving that the owner of <address> holds at least this much, optionally with a challenge string <message>. + + + + + show_transfers [in|out|pending|failed|pool] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] + + + + + Show the incoming/outgoing transfers within an optional height range. + + + + + unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] + + + + + Show the unspent outputs of a specified address within an optional amount range. + + + + + Rescan the blockchain from scratch. + + + + + set_tx_note <txid> [free text note] + + + + + Set an arbitrary string note for a <txid>. + + + + + get_tx_note <txid> + + + + + Get a string note for a txid. + + + + + set_description [free text note] + + + + + Set an arbitrary description for the wallet. + + + + + Get the description of the wallet. + + + + + Show the wallet's status. + + + + + Show the wallet's information. + + + + + sign <file> + + + + + Sign the contents of a file. + + + + + verify <filename> <address> <signature> + + + + + Verify a signature on the contents of a file. + + + + + export_key_images <file> + + + + + Export a signed set of key images to a <file>. + + + + + import_key_images <file> + + + + + Import a signed key images list and verify their spent status. + + + + + export_outputs <file> + + + + + Export a set of outputs owned by this wallet. + + + + + import_outputs <file> + + + + + Import a set of outputs owned by this wallet. + + + + + show_transfer <txid> + + + + + Show information about a transfer to/from this address. + + + + + Change the wallet's password. + + + + + Generate a new random full size payment id. These will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids. + + + + + Print the information about the current fee and transaction backlog. + + + + + Export data needed to create a multisig wallet + + + + + make_multisig <threshold> <string1> [<string>...] + + + + + Turn this wallet into a multisig wallet + + + + + finalize_multisig <string> [<string>...] + + + + + Turn this wallet into a multisig wallet, extra step for N-1/N wallets + + + + + export_multisig_info <filename> + + + + + Export multisig info for other participants + + + + + import_multisig_info <filename> [<filename>...] + + + + + Import multisig info from other participants + + + + + sign_multisig <filename> + + + + + Sign a multisig transaction from a file + + + + + submit_multisig <filename> + + + + + Submit a signed multisig transaction from a file + + + + + export_raw_multisig_tx <filename> + + + + + Export a signed multisig transaction to a file + + + + + help [<command>] + + + + + Show the help section or the documentation about a <command>. + + + + + integer >= + + + + + block height + + + + + No wallet found with that name. Confirm creation of new wallet named: + + + + + can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-spend-key="wallet_name", --generate-from-keys="wallet_name", --generate-from-multisig-keys="wallet_name" and --generate-from-json="jsonfilename" + + + + + can't specify both --restore-deterministic-wallet or --restore-multisig-wallet and --non-deterministic + + + + + --restore-multisig-wallet uses --generate-new-wallet, not --wallet-file + + + + + specify a recovery parameter with the --electrum-seed="multisig seed here" + + + + + Multisig seed failed verification + + + + + Enter seed encryption passphrase, empty if none + + + + + + This address is a subaddress which cannot be used here. + + + + + Error: expected M/N, but got: + + + + + Error: expected N > 1 and N <= M, but got: + + + + + Error: M/N is currently unsupported. + + + + + Generating master wallet from %u of %u multisig wallet keys + + + + + failed to parse secret view key + det gick inte att parsa hemlig visningsnyckel + + + + failed to verify secret view key + det gick inte att verifiera hemlig visningsnyckel + + + + Secret spend key (%u of %u): + + + + + Error: M/N is currently unsupported + + + + + Restore height + + + + + Still apply restore height? (Y/Yes/N/No): + + + + + Warning: using an untrusted daemon at %s, privacy will be lessened + + + + + Daemon either is not started or wrong port was passed. Please make sure daemon is running or change the daemon address using the 'set_daemon' command. + + + + + + invalid language choice entered. Please try again. + + + + + + Your wallet has been generated! +To start synchronizing with the daemon, use the "refresh" command. +Use the "help" command to see the list of available commands. +Use "help <command>" to see a command's documentation. +Always use the "exit" command when closing monero-wallet-cli to save +your current session's state. Otherwise, you might need to synchronize +your wallet again (your wallet keys are NOT at risk in any case). + + + + + + failed to generate new mutlisig wallet + + + + + Generated new %u/%u multisig wallet: + + + + + Opened %u/%u multisig wallet%s + + + + + Use "help <command>" to see a command's documentation. + + + + + + wallet is multisig and cannot save a watch-only version + + + + + missing daemon URL argument + + + + + Unexpected array length - Exited simple_wallet::set_daemon() + + + + + This does not seem to be a valid daemon URL. + + + + + + txid + + + + + + idx + + + + + (Some owned outputs have partial key images - import_multisig_info needed) + + + + + Currently selected account: [ + + + + + ] + + + + + Tag: + + + + + (No tag assigned) + + + + + Balance per address: + + + + + Address + + + + + + Balance + + + + + + Unlocked balance + + + + + Outputs + + + + + + Label + + + + + %8u %6s %21s %21s %7u %21s + + + + + usage: balance [detail] + + + + + + usage: incoming_transfers [available|unavailable] [verbose] [index=<N>] + + + + spent spenderad - + global index globalt index - + tx id tx-ID - + + + addr index + + + + No incoming transfers Inga inkommande överföringar - + No incoming available transfers Inga inkommande tillgängliga överföringar - + No incoming unavailable transfers Inga inkommande otillgängliga överföringar - - expected at least one payment_id - åtminstone ett payment_id förväntades + + Transaction successfully saved to + - + + + , txid + + + + + Failed to save transaction to + + + + payment betalning - + transaction transaktion - + height höjd - + unlock time upplåsningstid - + No payments with id Inga betalningar med ID - - - + + + failed to get blockchain height: det gick inte att hämta blockkedjans höjd: - + + + + + failed to connect to the daemon det gick inte att ansluta till daemonen - + Transaction %llu/%llu: txid=%s Transaktion %llu/%llu: txid=%s - + Input %llu/%llu: amount=%s Ingång %llu/%llu: belopp=%s - + failed to get output: det gick inte att hämta utgång: - + output key's originating block height shouldn't be higher than the blockchain height utgångsnyckelns ursprungsblockhöjd får inte vara högre än blockkedjans höjd - + Originating block heights: Ursprungsblockhöjder: - + | | - - + + | | - + Warning: Some input keys being spent are from Varning: Några ingångsnycklar som spenderas kommer från - + , which can break the anonymity of ring signature. Make sure this is intentional! , vilket kan bryta ringsignaturens anonymitet. Se till att detta är avsiktligt! - - + wrong number of arguments fel antal argument - - + + + No payment id is included with this transaction. Is this okay? (Y/Yes/N/No): Inget betalnings-ID har inkluderats med denna transaktion. Är detta okej? (J/Ja/N/Nej): - - + + No outputs found, or daemon is not ready Inga utgångar hittades, eller så är daemonen inte redo - - - - - failed to get random outputs to mix: - det gick inte att hitta slumpmässiga utgångar att mixa: - - - - + + Sweeping %s in %llu transactions for a total fee of %s. Is this okay? (Y/Yes/N/No): Sveper upp %s i %llu transaktioner för en total avgift på %s. Är detta okej? (J/Ja/N/Nej): - + + + Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No): Sveper upp %s för en total avgift på %s. Är detta okej? (J/Ja/N/Nej): - + Donating Donerar - - Loaded %lu transactions, for %s, fee %s, %s, %s, with min mixin %lu. %sIs this okay? (Y/Yes/N/No): - Läste in %lu transaktioner, för %s, avgift %s, %s, %s, med minsta mixin %lu. %sÄr detta okej? (J/Ja/N/Nej): - - - + This is a watch only wallet Detta är en granskningsplånbok - - usage: show_transfer <txid> - användning: show_transfer <transaktions-ID> + + usage: show_transfer <txid> + användning: show_transfer <transaktions-ID> - + + Double spend seen on the network: this transaction may or may not end up being mined + + + + Transaction ID not found Transaktions-ID kunde inte hittas - + true sant - + failed to parse refresh type det gick inte att parsa uppdateringstyp - - + + wallet is watch-only and has no seed plånboken är enbart för granskning och saknar frö - - + + wallet is non-deterministic and has no seed plånboken är icke-deterministisk och saknar frö - - + + wallet is watch-only and cannot transfer plånboken är enbart för granskning och kan inte göra överföringar - - - - mixin must be an integer >= 2 - mixin måste vara ett heltal >= 2 - - - - could not change default mixin - det gick inte att ändra standardinställning för mixin - - - + could not change default priority Det gick inte att ändra standardinställning för prioritet - - Synchronize transactions and balance - Synkronisera transaktioner och saldo - - - - incoming_transfers [available|unavailable] - Show incoming transfers, all or filtered by availability - incoming_transfers [available|unavailable] - Visa inkommande överföringar, alla eller filtrerade efter tillgänglighet - - - - payments <PID_1> [<PID_2> ... <PID_N>] - Show payments for given payment ID[s] - payments <B_ID_1> [<B_ID_2> … <B_ID_N>] - Visa betalningar för angivna betalnings-ID - - - - transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the fee of the transaction. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) - transfer [<prioritet>] [<mixin_antal>] <adress> <belopp> [<betalnings_id>] - Överför <belopp> till <adress>. <prioritet> är transaktionens prioritet. Ju högre prioritet, desto högre transaktionsavgift. Giltiga värden i prioritetsordning (från lägsta till högsta) är: unimportant, normal, elevated, priority. Om det utelämnas kommer standardvärdet (se kommandot "set priority") att användas. <mixin_antal> är det antal extra ingångar som ska inkluderas för att uppnå ospårbarhet. Flera betalningar kan göras på en gång genom att lägga till <adress_2> <belopp_2> etcetera (före betalnings-ID, om det inkluderas) - - - - locked_transfer [<mixin_count>] <addr> <amount> <lockblocks>(Number of blocks to lock the transaction for, max 1000000) [<payment_id>] - locked_transfer [<mixin_antal>] <adress> <belopp> <låsblock>(Antal block som transaktionen ska låsas för, max 1000000) [<betalnings_id>] - - - - Send all unmixable outputs to yourself with mixin 0 - Skicka alla omixbara utgångar till dig själv med mixin 0 - - - - Sign a transaction from a file - Signera en transaktion från en fil - - - - Submit a signed transaction from a file - Skicka en signerad transaktion från en fil - - - - integrated_address [PID] - Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID - integrated_address [PID] - Koda ett betalnings-ID till en integrerad adress för den aktuella plånbokens öppna adress (utan argument används ett slumpmässigt betalnings-ID), eller avkoda en integrerad adress till standardadress och betalnings-ID - - - - Save wallet data - Spara plånboksdata - - - - Save a watch-only keys file - Spara en fil med granskningsnycklar - - - - Display private view key - Visa privat visningsnyckel - - - - Display private spend key - Visa privat spendernyckel - - - - Display Electrum-style mnemonic seed - Visa minnesfrö (Electrum-typ) - - - - Available options: seed language - set wallet seed language; always-confirm-transfers <1|0> - whether to confirm unsplit txes; print-ring-members <1|0> - whether to print detailed information about ring members during confirmation; store-tx-info <1|0> - whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference; default-mixin <n> - set default mixin (default is 4); auto-refresh <1|0> - whether to automatically sync new blocks from the daemon; refresh-type <full|optimize-coinbase|no-coinbase|default> - set wallet refresh behaviour; priority [0|1|2|3|4] - default/unimportant/normal/elevated/priority fee; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - set default monero (sub-)unit; min-outputs-count [n] - try to keep at least that many outputs of value at least min-outputs-value; min-outputs-value [n] - try to keep at least min-outputs-count outputs of at least that value; merge-destinations <1|0> - whether to merge multiple payments to the same destination address - Tillgängliga alternativ: seed language - ange språk för plånbokens frö; always-confirm-transfers <1|0> - huruvida ej delade transaktioner ska bekräftas; print-ring-members <1|0> - huruvida detaljerad information om ringmedlemmar ska skrivas ut vid bekräftelse; store-tx-info <1|0> - huruvida info om utgående transaktioner ska sparas (måladress, betalnings-ID, hemlig transaktionsnyckel) för framtida referens; default-mixin <n> - ange standardvärde för mixin (standard är 4); auto-refresh <1|0> - huruvida nya block från daemonen ska synkas automatiskt; refresh-type <full|optimize-coinbase|no-coinbase|default> - ange uppdateringsbeteende för plånbok; priority [0|1|2|3|4] - standard/oviktigt/normal/förhöjd/prioritetsavgift; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - ange standardvärde för monero-(under-)enhet; min-outputs-count [n] - försök behålla åtminstone så många utgångar med ett värde på åtminstone min-outputs-value; min-outputs-value [n] - försök behålla åtminstone min-outputs-count utgångar av åtminstone detta värde; merge-destinations <1|0> - huruvida flera betalningar till samma måladress ska slås samman - - - - Rescan blockchain for spent outputs - Genomsök blockkedjan igen för spenderade utgångar - - - - Get transaction key (r) for a given <txid> - Hämta transaktionsnyckel (r) för ett givet <transaktions-ID> - - - - Check amount going to <address> in <txid> - Kontrollera belopp som går till <adress> i <transaktions-ID> - - - - Generate a signature to prove payment to <address> in <txid> using the transaction secret key (r) without revealing it - Skapa en signatur för att bevisa betalning till <adress> i <transaktions-ID> genom att använda hemlig nyckel för transaktion (r) utan att avslöja den - - - - Check tx proof for payment going to <address> in <txid> - Kontrollera transaktionsbevis för betalning som går till <adress> i <transaktions-ID> - - - - unspent_outputs [<min_amount> <max_amount>] - Show unspent outputs within an optional amount range - unspent_outputs [<min_belopp> <max_belopp>] - Visa ej spenderade utgångar inom ett valfritt beloppsintervall - - - - Rescan blockchain from scratch - Genomsök blockkedjan från början - - - - Set an arbitrary string note for a txid - Ange en godtycklig sträng som anteckning för ett transaktions-ID - - - - Get a string note for a txid - Hämta en stränganteckning för ett transaktions-ID - - - - Show wallet status information - Visa statusinformation för plånbok - - - - Sign the contents of a file - Signera innehållet i en fil - - - - Verify a signature on the contents of a file - Verifera signaturen för innehållet i en fil - - - - Export a signed set of key images - Exportera en signerad uppsättning nyckelavbildningar - - - - Import signed key images list and verify their spent status - Importera lista med signerade nyckelavbildningar och verifera deras spenderingsstatus - - - - Export a set of outputs owned by this wallet - Exportera en uppsättning utgångar som ägs av denna plånbok - - - - Import set of outputs owned by this wallet - Importera en uppsättning utgångar som ägs av denna plånbok - - - + full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) full (långsammast, inga antaganden); optimize-coinbase (snabb, antar att hela coinbase-transaktionen betalas till en enda adress); no-coinbase (snabbast, antar att ingen coinbase-transaktion tas emot), default (samma som optimize-coinbase) - + monero, millinero, micronero, nanonero, piconero monero, millinero, micronero, nanonero, piconero - + Wallet name not valid. Please try again or use Ctrl-C to quit. Plånbokens namn ej giltigt. Försök igen eller använd Ctrl-C för att avsluta. - + Wallet and key files found, loading... Plånbok och nyckelfil hittades, läser in … - + Key file found but not wallet file. Regenerating... Nyckelfil hittades men inte plånboksfilen. Återskapar … - + Key file not found. Failed to open wallet: Nyckelfilen kunde inte hittas. Det gick inte att öppna plånbok: - + Generating new wallet... Skapar ny plånbok … - - can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-json="jsonfilename" and --generate-from-keys="wallet_name" - det går inte att ange mer än en av --generate-new-wallet="plånboksnamn", --wallet-file="plånboksnamn", --generate-from-view-key="plånboksnamn", --generate-from-json="json-filnamn" och --generate-from-keys="plånboksnamn" - - - - can't specify both --restore-deterministic-wallet and --non-deterministic - det går inte att ange både --restore-deterministic-wallet och --non-deterministic - - - + Electrum-style word list failed verification det gick inte att verifiera ordlista av Electrum-typ - - - - - + + + + + + + + + + No data supplied, cancelled Ingen data angiven, avbryter - - - - - - - - - + + + + + + + + + + + + failed to parse address det gick inte att parsa adressen - - + + failed to parse view key secret key det gick inte att parsa hemlig visningsnyckel - - + + failed to verify view key secret key det gick inte att verifiera hemlig visningsnyckel - - + + + view key does not match standard address visningsnyckel matchar inte standardadress - - - + + + + + account creation failed det gick inte att skapa konto - + + + failed to parse spend key secret key det gick inte att parsa spendernyckel hemlig nyckel - + + failed to verify spend key secret key det gick inte att verifiera spendernyckel hemlig nyckel - + + spend key does not match standard address spendernyckel matchar inte standardadress - + failed to open account det gick inte att öppna konto - - - - - + + + + + wallet is null plånbok är null - - Daemon either is not started or wrong port was passed. Please make sure daemon is running or restart the wallet with the correct daemon address. - Antingen har daemonen inte startat eller så angavs fel port. Se till att daemonen kör eller starta om plånboken med korrekt daemonadress. - - - - - invalid language choice passed. Please try again. - - ogiltigt språkval angavs. Försök igen. - - - - + View key: Visningsnyckel: - - Your wallet has been generated! -To start synchronizing with the daemon, use the "refresh" command. -Use the "help" command to see the list of available commands. -Always use the "exit" command when closing monero-wallet-cli to save -your current session's state. Otherwise, you might need to synchronize -your wallet again (your wallet keys are NOT at risk in any case). - - Din plånbok har skapats! -För att starta synkronisering med daemonen, använd kommandot "refresh". -Använd kommandot "help" för att se en lista över tillgängliga kommandon. -Använd alltid kommandot "exit" när du stänger monero-wallet-cli så att ditt aktuella sessionstillstånd sparas. Annars kan du bli tvungen att synkronisera -din plånbok igen (din plånboks nycklar är dock INTE hotade i vilket fall som helst). - - - - + You may want to remove the file "%s" and try again Du kan också vilja ta bort filen "%s" och försöka igen - + failed to deinitialize wallet det gick inte att avinitiera plånboken - - + + + this command requires a trusted daemon. Enable with --trusted-daemon detta kommando kräver en betrodd daemon. Aktivera med --trusted-daemon - + blockchain can't be saved: blockkedjan kan inte sparas: - - - - - + + daemon is busy. Please try again later. daemonen är upptagen. Försök igen senare. - - - - - + + no connection to daemon. Please make sure daemon is running. ingen anslutning till daemonen. Se till att daemonen körs. - + refresh error: fel vid uppdatering: - + Balance: Saldo: - + pubkey öppen nyckel - + key image nyckelavbildning - - + + unlocked upplåst - + ringct ringct - + T S - + F F - + locked låst - + RingCT RingCT - + - - - + + expected at least one payment ID + + + + payment ID has invalid format, expected 16 or 64 character hex string: betalnings-ID har ogiltigt format, en 16- eller 64-teckens hex-sträng förväntades: - + failed to get spent status det gick inte att hämta spenderingsstatus - + the same transaction samma transaktion - + blocks that are temporally very close block som ligger väldigt nära varandra i tiden - + + + Ring size must not be 0 + + + + + + ring size %u is too small, minimum is %u + + + + Locked blocks too high, max 1000000 (˜4 yrs) Låsta block för högt, max 1000000 (˜~4 år) - - usage: get_tx_proof <txid> <dest_address> [<tx_key>] - användning: get_tx_proof <txid> <måladress> [<tx_key>] - - - - failed to parse tx_key - det gick inte att parsa tx_nyckel - - - - Tx secret key was found for the given txid, but you've also provided another tx secret key which doesn't match the found one. - Hemlig transaktionsnyckel hittades för det givna txid, men du har också angivit en annan hemlig transaktionsnyckel som inte matchar den hittade nyckeln. - - - - Tx secret key wasn't found in the wallet file. Provide it as the optional third parameter if you have it elsewhere. - Den hemliga transaktionsnyckeln kunde inte hittas i plånboksfilen. Ange den som den valfria tredje parametern om du har den någon annanstans. - - - - Signature: - Signatur: - - - - usage: check_tx_proof <txid> <address> <signature> - användning: check_tx_proof <txid> <adress> <signatur> - - - - Signature header check error - Fel vid kontroll av signaturhuvud - - - - - - Signature decoding error - nFel vid avkodning av signatur - - - - Tx pubkey was not found - Transaktionens öppna nyckel kunde inte hittas - - - + + Good signature Bra signatur - + + + Bad signature Dålig signatur - - failed to generate key derivation - det gick inte att skapa nyckelhärledning - - - + usage: integrated_address [payment ID] användning: integrated_address [betalnings-ID] - - Integrated address: account %s, payment ID %s - Integrerad adress: konto %s, betalnings-ID %s - - - + Standard address: Standardadress: - + failed to parse payment ID or address det gick inte att parsa betalnings-ID eller adress - - usage: address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] - användning: address_book [(add (<adress> [pid <långt eller kort betalnings-ID>])|<Integrerad adress> [<beskrivning eventuellt med blanktecken>])|(delete <index>)] + + usage: address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] + användning: address_book [(add (<adress> [pid <långt eller kort betalnings-ID>])|<Integrerad adress> [<beskrivning eventuellt med blanktecken>])|(delete <index>)] - + failed to parse payment ID det gick inte att parsa betalnings-ID - + failed to parse index det gick inte att parsa index - + Address book is empty. Adressboken är tom. - + Index: Index: - + + Address: Adress: - + Payment ID: Betalnings-ID: - + + Description: Beskrivning: - + usage: set_tx_note [txid] free text note användning: set_tx_note [txid] fri textanteckning - + usage: get_tx_note [txid] användning: get_tx_note [txid] - - usage: sign <filename> - användning: sign <filnamn> + + usage: sign <filename> + användning: sign <filnamn> - + wallet is watch-only and cannot sign plånboken är enbart för granskning och kan inte signera - - - + + + + failed to read file det gick inte att läsa filen - - usage: verify <filename> <address> <signature> - användning: verify <filnamn> <adress> <signatur> + + usage: check_tx_proof <txid> <address> <signature_file> [<message>] + - + + + + failed to load signature file + + + + + usage: get_spend_proof <txid> [<message>] + + + + + wallet is watch-only and cannot generate the proof + + + + + usage: check_spend_proof <txid> <signature_file> [<message>] + + + + + usage: get_reserve_proof (all|<amount>) [<message>] + + + + + The reserve proof can be generated only by a full wallet + + + + + usage: check_reserve_proof <address> <signature_file> [<message>] + + + + + Address must not be a subaddress + + + + + Good signature -- total: %s, spent: %s, unspent: %s + + + + + usage: show_transfers [in|out|all|pending|failed] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] + + + + + [Double spend seen on the network: this transaction may or may not end up being mined] + + + + + usage: unspent_outputs [index=<N1>[,<N2>,...]] [<min_amount> [<max_amount>]] + + + + + There is no unspent output in the specified address + + + + + (no daemon) + + + + + (out of sync) + + + + + (Untitled account) + + + + + + + + + + failed to parse index: + + + + + + specify an index between 0 and + + + + + usage: + account + account new <label text with white spaces allowed> + account switch <index> + account label <index> <label text with white spaces allowed> + account tag <tag_name> <account_index_1> [<account_index_2> ...] + account untag <account_index_1> [<account_index_2> ...] + account tag_description <tag_name> <description> + + + + + +Grand total: + Balance: + + + + + , unlocked balance: + + + + + Untagged accounts: + + + + + Tag %s is unregistered. + + + + + Accounts with tag: + + + + + Tag's description: + + + + + Account + + + + + %c%8u %6s %21s %21s %21s + + + + + ---------------------------------------------------------------------------------- + + + + + %15s %21s %21s + + + + + Primary address + + + + + (used) + + + + + (Untitled address) + + + + + <index_min> is already out of bound + + + + + <index_max> exceeds the bound + + + + + usage: address [ new <label text with white spaces allowed> | all | <index_min> [<index_max>] | label <index> <label text with white spaces allowed> ] + + + + + + Integrated addresses can only be created for account 0 + + + + + Integrated address: %s, payment ID: %s + + + + + Subaddress: + + + + + usage: get_description + + + + + no description found + + + + + description found: + + + + + Filename: + + + + + Watch only + + + + + %u/%u multisig%s + + + + + Normal + + + + + Type: + + + + + Testnet: + + + + + Yes + + + + + No + + + + + This wallet is multisig and cannot sign + + + + + usage: verify <filename> <address> <signature> + användning: verify <filnamn> <adress> <signatur> + + + Bad signature from Dålig signatur från - + Good signature from Bra signatur från - - usage: export_key_images <filename> - användning: export_key_images <filnamn> + + usage: export_key_images <filename> + användning: export_key_images <filnamn> - + wallet is watch-only and cannot export key images plånboken är enbart för granskning och kan inte exportera nyckelavbildningar - - + + + failed to save file det gick inte att spara fil - + Signed key images exported to Signerade nyckelavbildningar exporterades till - - usage: import_key_images <filename> - användning: import_key_images <filnamn> + + usage: import_key_images <filename> + användning: import_key_images <filnamn> - - usage: export_outputs <filename> - användning: export_outputs <filnamn> + + usage: export_outputs <filename> + användning: export_outputs <filnamn> - + Outputs exported to Utgångar exporterades till - - usage: import_outputs <filename> - användning: import_outputs <filnamn> + + usage: import_outputs <filename> + användning: import_outputs <filnamn> - - + + + + amount is wrong: beloppet är fel: - - + expected number from 0 to förväntades: ett tal från 0 till - - Money successfully sent, transaction - Pengar skickades, transaktion - - - - no connection to daemon. Please, make sure daemon is running. - ingen anslutning till daemonen. Se till att daemonen körs. - - - - - - - not enough outputs for specified mixin_count - inte tillräckligt många utgångar för angiven mixin_count - - - - - - - output amount - utgångens belopp - - - - - - - found outputs to mix - hittade utgångar att mixa - - - - - - - transaction was not constructed - transaktionen konstruerades inte - - - - - - - transaction %s was rejected by daemon with status: - transaktionen %s avvisades av daemonen med status: - - - - - - - one of destinations is zero - ett av målen är noll - - - - Failed to find a suitable way to split transactions - Det gick inte att hitta ett passande sätt att dela upp transaktioner - - - - - - - unknown transfer error: - okänt överföringsfel: - - - + Sweeping Sveper upp - - Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No) - Sveper upp %s för en total avgift på %s. Är detta okej? (J/Ja/N/Nej) - - - - - + Money successfully sent, transaction: Pengar skickades, transaktion: - + Change goes to more than one address Växel går till mer än en adress - + %s change to %s %s växel till %s - + no change ingen växel - + + + Transaction successfully signed to file Transaktionen signerades till fil - - usage: get_tx_key <txid> - användning: get_tx_key <transaktions-ID> + + failed to parse Payment ID + - - - - - - - + + usage: sweep_single [<priority>] [<ring_size>] <key_image> <address> [<payment_id>] + + + + + failed to parse key image + + + + + No outputs found + + + + + Multiple transactions are created, which is not supposed to happen + + + + + The transaction uses multiple or no inputs, which is not supposed to happen + + + + + missing threshold amount + + + + + donations are not enabled on the testnet + + + + + usage: donate [index=<N1>[,<N2>,...]] [<priority>] [<ring_size>] <amount> [<payment_id>] + + + + + dummy output(s) + + + + + Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu, %s. %sIs this okay? (Y/Yes/N/No): + + + + + This is a multisig wallet, it can only sign with sign_multisig + + + + + usage: sign_transfer [export] + + + + + Transaction raw hex data exported to + + + + + usage: get_tx_key <txid> + användning: get_tx_key <transaktions-ID> + + + + + + + + + + + failed to parse txid det gick inte att parsa transaktions-id - + Tx key: Tx-nyckel: - + no tx keys found for this txid inga tx-nycklar kunde hittas för detta txid - - usage: check_tx_key <txid> <txkey> <address> - användning: check_tx_key <txid> <txnyckel> <adress> + + usage: get_tx_proof <txid> <address> [<message>] + - - + + + + signature file saved to: + + + + + + + failed to save signature file + + + + + usage: check_tx_key <txid> <txkey> <address> + användning: check_tx_key <txid> <txnyckel> <adress> + + + + failed to parse tx key det gick inte att parsa transaktionsnyckeln - - - failed to get transaction from daemon - det gick inte att hämta transaktion från daemon - - - - - failed to parse transaction from daemon - det gick inte att parsa transaktion från daemonen - - - - - failed to validate transaction from daemon - det gick inte att validera transaktion från daemon - - - - - failed to get the right transaction from daemon - det gick inte att hämta rätt transaktion från daemonen - - - - failed to generate key derivation from supplied parameters - det gick inte att skapa nyckelhärledning från angivna parametrar - - - + + + error: fel: - + + received mottaget - + + in txid i transaktions-id - + + received nothing in txid tog emot ingenting i transaktions-id - + + WARNING: this transaction is not yet included in the blockchain! VARNING: denna transaktion är ännu inte inkluderad i blockkedjan! - + + This transaction has %u confirmations Transaktionen har %u bekräftelser - + + WARNING: failed to determine number of confirmations! VARNING: det gick inte att avgöra antal bekräftelser! - - usage: show_transfers [in|out|all|pending|failed] [<min_height> [<max_height>]] - användning: show_transfers [in|out|all|pending|failed] [<min_höjd> [<max_höjd>]] - - - + bad min_height parameter: dålig parameter för min_height: - + bad max_height parameter: dålig parameter för max_height: - + in in - - + + out ut - + failed misslyckades - + pending väntar - - usage: unspent_outputs [<min_amount> <max_amount>] - användning: unspent_outputs [<min_belopp> <max_belopp>] + + <min_amount> should be smaller than <max_amount> + <min_belopp> måste vara mindre än <max_belopp> - - <min_amount> should be smaller than <max_amount> - <min_belopp> måste vara mindre än <max_belopp> - - - + Amount: Belopp: - + , number of keys: , antal nycklar: - + - + Min block height: Minblockhöjd: - + Max block height: Maxblockhöjd: - + Min amount found: Minbelopp funnet: - + Max amount found: Maxbelopp funnet: - + Total count: Totalt antal: - + Bin size: Storlek för binge: - + Outputs per *: Utgångar per *: - + count ^ @@ -2318,67 +3488,156 @@ Utgångar per *: - + | | - + + + - - +--> block height + + +--> block height - +--> blockhöjd + +--> blockhöjd - + ^ ^ - + ^ ^ - + - + wallet plånbok - - + + Random payment ID: Slumpmässigt betalnings-ID: - + Matching integrated address: Matchande integrerad adress: + + genms + + + Base filename (-1, -2, etc suffixes will be appended as needed) + + + + + Give threshold and participants at once as M/N + + + + + How many participants wil share parts of the multisig wallet + + + + + How many signers are required to sign a valid transaction + + + + + Create testnet multisig wallets + + + + + Generating %u %u/%u multisig wallets + + + + + Error verifying multisig extra info + + + + + Error finalizing multisig + + + + + Generated multisig wallets for address + + + + + Error creating multisig wallets: + + + + + This program generates a set of multisig wallets - use this simpler scheme only if all the participants trust each other + + + + + Error: expected N/M, but got: + + + + + + Error: either --scheme or both of --threshold and --participants may be given + + + + + Error: expected N > 1 and N <= M, but got N==%u and M==%d + + + + + Error: --filename-base is required + + + + + Error: unsupported scheme: only N/N and N-1/N are supported + + + sw + + + Generate new wallet and save it to <arg> + Skapa ny plånbok och spara den till <arg> + - Generate new wallet and save it to <arg> - Skapa ny plånbok och spara den till <arg> + Generate incoming-only wallet from view key + Skapa granskningsplånbok från visningsnyckel - Generate incoming-only wallet from view key - Skapa granskningsplånbok från visningsnyckel + Generate deterministic wallet from spend key + @@ -2386,242 +3645,252 @@ Utgångar per *: Skapa plånbok från privata nycklar - + + Generate a master wallet from multisig wallet keys + + + + + Language for mnemonic + + + + Specify Electrum seed for wallet recovery/creation Ange Electrum-frö för att återställa/skapa plånbok - + Recover wallet using Electrum-style mnemonic seed Återställ plånbok genom användning av minnesfrö (Electrum-typ) - + + Recover multisig wallet using Electrum-style mnemonic seed + + + + Generate non-deterministic view and spend keys Skapa non-deterministic visnings- och spendernyckel - + Enable commands which rely on a trusted daemon Aktivera kommandon som kräver en betrodd daemon - + Allow communicating with a daemon that uses a different RPC version Tillåt kommunikation med en daemon som använder en annan version av RPC - + Restore from specific blockchain height Återställ från angiven blockkedjehöjd - + + The newly created transaction will not be relayed to the monero network + + + + daemon is busy. Please try again later. daemonen är upptagen. Försök igen senare. - + possibly lost connection to daemon anslutning till daemonen kan ha tappats - + Error: Fel: - + + This is the command line monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Failed to initialize wallet Det gick inte att initiera plånbok - - tools::dns_utils - - - DNSSEC validation passed - DNSSEC-validering godkänd - - - - WARNING: DNSSEC validation was unsuccessful, this address may not be correct! - VARNING: DNSSEC-verifiering misslyckades, denna adress kanske inte är korrekt! - - - - For URL: - För URL: - - - - Monero Address = - Monero-adress = - - - - Is this OK? (Y/n) - är det OK? (J/n) - - - - you have cancelled the transfer request - du har avbrutit överföringsbegäran - - tools::wallet2 - - Use daemon instance at <host>:<port> - Använd daemoninstans på <värddator>:<port> + + Use daemon instance at <host>:<port> + Använd daemoninstans på <värddator>:<port> - - Use daemon instance at host <arg> instead of localhost - Använd daemon-instansen på värddator <arg> istället för localhost + + Use daemon instance at host <arg> instead of localhost + Använd daemon-instansen på värddator <arg> istället för localhost - - Wallet password - Lösenord för plånboken - - - + Wallet password file Lösenordsfil för plånboken - - Use daemon instance at port <arg> instead of 18081 - Använd daemon-instansen på port <arg> istället för 18081 + + Use daemon instance at port <arg> instead of 18081 + Använd daemon-instansen på port <arg> istället för 18081 - + For testnet. Daemon must also be launched with --testnet flag För testnet. Daemonen måste också startas med flaggan --testnet - + Restricts to view-only commands Begränsar till granskningskommandon - + can't specify daemon host or port more than once det går inte ange värd eller port för daemonen mer än en gång - + can't specify more than one of --password and --password-file det går inte att ange mer än en av --password och --password-file - + the password file specified could not be read det gick inte att läsa angiven lösenordsfil - - Enter new wallet password - Ange nytt lösenord för plånboken - - - - failed to read wallet password - det gick inte att läsa lösenord för plånboken - - - + Failed to load file Det gick inte att läsa in fil - + Wallet password (escape/quote as needed) Lösenord för plånboken (använd escape-sekvenser eller citattecken efter behov) - + Specify username[:password] for daemon RPC client Ange användarnamn[:lösenord] för RPC-klient till daemonen - + + no password specified; use --prompt-for-password to prompt for a password + + + + Failed to parse JSON Det gick inte att parsa JSON - + Version %u too new, we can only grok up to %u Version %u är för ny, vi förstår bara upp till %u - + failed to parse view key secret key det gick inte att parsa hemlig visningsnyckel - - - + + + failed to verify view key secret key det gick inte att verifiera hemlig visningsnyckel - + failed to parse spend key secret key det gick inte att parsa spendernyckel hemlig nyckel - - - + + + failed to verify spend key secret key det gick inte att verifiera spendernyckel hemlig nyckel - + Electrum-style word list failed verification det gick inte att verifiera ordlista av Electrum-typ - - At least one of Electrum-style word list and private view key must be specified - Åtminstone en av ordlista av Electrum-typ och privat visningsnyckel måste anges + + At least one of Electrum-style word list and private view key and private spend key must be specified + - + Both Electrum-style word list and private key(s) specified Både ordlista av Electrum-typ och privat nyckel har angivits - + invalid address ogiltig adress - + view key does not match standard address visningsnyckel matchar inte standardadress - + spend key does not match standard address spendernyckel matchar inte standardadress - + Cannot generate deprecated wallets from JSON Det går inte att skapa inaktuella plånböcker från JSON - + + failed to parse address: + + + + + Address must be specified in order to create watch-only wallet + + + + failed to generate new wallet: det gick inte att skapa ny plånbok: - + + + + + + + + + Primary account + + + + + No funds received in this tx. + + + + failed to read file det gick inte att läsa filen @@ -2629,153 +3898,191 @@ Utgångar per *: tools::wallet_rpc_server - + Daemon is local, assuming trusted Daemonen är lokal, utgår från att den är betrodd - + + Failed to create directory + + + + + Failed to create directory %s: %s + + + + Cannot specify -- Det går inte att ange -- - + and -- och -- - + Failed to create file Det gick inte att skapa fil - + . Check permissions or remove file . Kontrollera behörigheter eller ta bort filen - + Error writing to file Fel vid skrivning till fil - + RPC username/password is stored in file Användarnamn/lösenord för RPC har sparats i fil - + + Tag %s is unregistered. + + + + + Transaction not possible. Available only %s, transaction amount %s = %s + %s (fee) + + + + + This is the RPC monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Can't specify more than one of --wallet-file and --generate-from-json Det går inte att ange mer än en av --wallet-file och --generate-from-json - + Must specify --wallet-file or --generate-from-json or --wallet-dir Måste ange --wallet-file eller --generate-from-json eller --wallet-dir - + Loading wallet... Läser in plånbok … - - - Storing wallet... - Sparar plånbok … + + + Saving wallet... + - - - Stored ok - Sparad ok + + + Successfully saved + - - Loaded ok - Inläst ok + + Successfully loaded + - + + Failed to initialize wallet RPC server + + + + + Starting wallet RPC server + + + + + Failed to run wallet: + + + + + Stopped wallet RPC server + + + + + Failed to save wallet: + + + + Wallet initialization failed: Det gick inte att initiera plånbok: - - - Failed to initialize wallet rpc server - Det gick inte att initiera RPC-servern för plånbok - - - - Starting wallet rpc server - Startar RPC-servern för plånbok - - - - Stopped wallet rpc server - Stoppade RPC-servern för plånbok - - - - Failed to store wallet: - Det gick inte att spara plånbok: - wallet_args - - + + + Wallet options Alternativ för plånbok - + Generate wallet from JSON format file Skapa plånbok från fil i JSON-format - - Use wallet <arg> - Använd plånbok <arg> + + Use wallet <arg> + Använd plånbok <arg> - + Max number of threads to use for a parallel job Max antal trådar att använda för ett parallellt jobb - + Specify log file Ange loggfil - + Config file Konfigurationsfil - + General options Allmänna alternativ - + + This is the command line monero wallet. It needs to connect to a monero +daemon to work correctly. + + + + Can't find config file Det gick inte att hitta konfigurationsfilen - + Logging to: Loggar till: - + Logging to %s Loggar till %s - + Usage: Användning: