commit 729cc4df2b2ff9f79ba558eb4aba9360115ff47d Author: Verita84 Date: Wed Aug 25 08:39:26 2021 -0600 fix diff --git a/README.md b/README.md new file mode 100644 index 0000000..5bcae91 --- /dev/null +++ b/README.md @@ -0,0 +1,62 @@ +# Quickly Run Pleroma in Docker +This setup will allow you to quickly run and maintain a Pleroma instance. + +### Features +* Mostly Automated Install +* Automatic Backup +* Automatic Restore +* Automatic Upgrades +* Automatic install of SoapBoxFE if needed +* Daily Postgresql backups + +### System Requirements + +* Your own Domain Name +* Docker installed +* Cloudflare setup for your Domain Name +* Port 443 open on your firewall/router + +### Getting Started + +##### Modify ```terms-of-service.html``` with your terms of service + +##### Modify ```ENDPOINT``` in ```docker-compose.yml``` with your domain name + +##### Modify the second to last line in ```pleroma/setup.sh``` with your desired admin name + +### Running with a low-memory machine? ### +Here is the recommended changes to make at the bottom of ```postgresql/postgresql.conf``` +``` +max_connections = 200 +shared_buffers = 128MB +effective_cache_size = 384MB +maintenance_work_mem = 32MB +checkpoint_completion_target = 0.9 +wal_buffers = 3932kB +default_statistics_target = 100 +random_page_cost = 4 +effective_io_concurrency = 2 +work_mem = 327kB +min_wal_size = 1GB +max_wal_size = 4GB +``` + + +##### Build and Start Pleroma + +``` +git checkout HEAD config/config.exs +docker-compose up -d +``` + +##### Get the URL to change the Pleromp Admin user + +``` +docker-compose logs -f +``` + +The URL will let you set the admin password so you can login your instance. + + + + diff --git a/config/.placeholder b/config/.placeholder new file mode 100755 index 0000000..e69de29 diff --git a/config/config.exs b/config/config.exs new file mode 100755 index 0000000..69fe894 --- /dev/null +++ b/config/config.exs @@ -0,0 +1,59 @@ +# Pleroma instance configuration + +# NOTE: This file should not be committed to a repo or otherwise made public +# without removing sensitive information. + +import Config + +config :pleroma, Pleroma.Web.Endpoint, + url: [host: "replaceME", scheme: "https", port: 443], + http: [ip: {0, 0, 0, 0}, port: 4000], + secret_key_base: "0jKveRU44GNncPeKLgcdGVm+7rJb2hNxCpCWd2g0A8Lw2cVJmDCypNqa3ljMZcwJ", + signing_salt: "C+0dBzoS" + +config :pleroma, :instance, + name: "admin", + email: "admin@localhost", + notify_email: "admin@localhost", + limit: 5000, + registrations_open: true + +config :pleroma, :media_proxy, + enabled: false, + redirect_on_failure: true + #base_url: "https://cache.pleroma.social" + +config :pleroma, Pleroma.Repo, + adapter: Ecto.Adapters.Postgres, + username: "pleroma", + password: "sql", + database: "pleroma", + hostname: "postgresql", + pool_size: 10 + +# Configure web push notifications +config :web_push_encryption, :vapid_details, + subject: "mailto:admin@admin@localhost", + public_key: "BFXyq2frSPpiMgueoxcmvoMzp6Bm-vXI-dasDM4fAA-zjP7JgILG06LKpQuU4eLdbjGnYsmurUeubD8l7b103zg", + private_key: "Ths8KtdsPNEXl2EazZj7MQRY3xxIb0FOCjEvai4eI8Y" + +config :pleroma, :database, rum_enabled: false +config :pleroma, :instance, static_dir: "/var/lib/pleroma/static" +config :pleroma, Pleroma.Uploaders.Local, uploads: "/var/lib/pleroma/uploads" + +# Enable Strict-Transport-Security once SSL is working: +# config :pleroma, :http_security, +# sts: true + +# Configure S3 support if desired. +# The public S3 endpoint is different depending on region and provider, +# consult your S3 provider's documentation for details on what to use. +# +# config :pleroma, Pleroma.Uploaders.S3, +# bucket: "some-bucket", +# public_endpoint: "https://s3.amazonaws.com" +# +# +config :joken, default_signer: "6EasmUX4lCJSlAnGScL0rXBhIeoaWjarH7TGhdbe9VLXO/MnSkMY2LaZixW7kgaT" + +config :pleroma, configurable_from_database: true diff --git a/docker-compose.yaml b/docker-compose.yaml new file mode 100644 index 0000000..ef811de --- /dev/null +++ b/docker-compose.yaml @@ -0,0 +1,36 @@ +version: '3' +services: + postgresql: + build: ./postgresql + restart: "always" + volumes: + - postgresql:/var/lib/postgresql + networks: + - pleroma + environment: + ENDPOINT: "localhost" + privileged: true + + pleroma: + build: ./pleroma + restart: "always" + volumes: + - ./config:/etc/pleroma + - ./var:/var/lib/pleroma + - ./saves:/saves + ports: + - "443:443" + networks: + - pleroma + environment: + ENDPOINT: "localhost" + privileged: true + +networks: + pleroma: + +volumes: + postgresql: + external: false + + \ No newline at end of file diff --git a/emoji.sh b/emoji.sh new file mode 100755 index 0000000..71242a6 --- /dev/null +++ b/emoji.sh @@ -0,0 +1,37 @@ +#!/bin/bash +HOST='freespeechextremist.com' + +gather () { + clear + echo "Gathering Emojis" + curl -s https://$HOST/api/v1/custom_emojis | \ + jq -r 'map(.shortcode + " " + .url) | join("\n")' | \ + awk '{gsub(/[^-_a-z0-9]+/, "_", $1); + r=rand(); + system("sleep " r ";wget -nv -O \"" $1 ".png\" \"" $2 "\"")}' +} + +process () { + echo;echo;echo "Creating pack.json" + echo '{ "files": {' > pack.json + find . -type f -name \*.png -exec echo \"{}\": \"{}\", \; > pack.test + sed -i '$s/,//' pack.test + cat pack.test >> pack.json + echo '},' >> pack.json + echo '"pack": { ' >> pack.json + echo '"description": "'gentoo user' user banner made by enigmatico",' >> pack.json + echo '"fallback-src": "https://fedi.absturztau.be/emoji-packs/gentoouserbanner.zip",' >> pack.json + echo '"fallback-src-sha256": "0671cffc082bab70b9f67d3f20183f957d3d6294e9416ccbe5b709beccea4ada",' >> pack.json + echo '"homepage": "https://fedi.absturztau.be/emoji-packs/index.html",' >> pack.json + echo '"license": "Apache 2.0",' >> pack.json + echo '"share-files": true' >> pack.json + echo '}' >> pack.json + echo '}' >> pack.json + sed -i 's/.\///g' pack.json +} + + +#gather +process +su pleroma -s $SHELL -lc "/opt/pleroma/bin/pleroma_ctl emoji reload" + diff --git a/pleroma/Dockerfile b/pleroma/Dockerfile new file mode 100644 index 0000000..d31eb2c --- /dev/null +++ b/pleroma/Dockerfile @@ -0,0 +1,36 @@ +FROM ubuntu:rolling +ENV DEBIAN_FRONTEND=noninteractive +RUN apt-get update;apt-get install exiftool libmagic-dev software-properties-common cron libncurses6 musl sudo bash curl nginx unzip postgresql-contrib certbot busybox imagemagick ffmpeg -y +RUN add-apt-repository universe;apt-get update +RUN apt-get -y install python3-certbot-nginx + +WORKDIR /tmp +ENV SHELL="/bin/bash" +ENV FLAVOUR="amd64" + +RUN adduser --system --shell /bin/false --home /opt/pleroma pleroma + +WORKDIR /tmp +RUN su pleroma -s $SHELL -lc "curl 'https://git.pleroma.social/api/v4/projects/2/jobs/artifacts/stable/download?job=$FLAVOUR' -o /tmp/pleroma.zip;unzip /tmp/pleroma.zip -d /tmp/" + +RUN su pleroma -s $SHELL -lc "mv /tmp/release/* /opt/pleroma;rmdir /tmp/release;rm /tmp/pleroma.zip" + +RUN mkdir -p /var/lib/pleroma/uploads;chown -R pleroma /var/lib/pleroma + +RUN mkdir -p /var/lib/pleroma/static;chown -R pleroma /var/lib/pleroma + +RUN mkdir -p /etc/pleroma;chown -R pleroma /etc/pleroma + +ADD default.conf /etc/nginx/conf.d/ +ADD start.sh / +ADD setup.sh / + +ADD crontab / +RUN crontab /crontab + +ADD restore.sh / +ADD backup.sh / + +ADD terms-of-service.html /tmp/ + +CMD bash /start.sh diff --git a/pleroma/backup.sh b/pleroma/backup.sh new file mode 100644 index 0000000..9241efb --- /dev/null +++ b/pleroma/backup.sh @@ -0,0 +1,3 @@ +#!/bin/bash +su postgres -s /bin/bash -lc "/usr/lib/postgresql/12/bin/pg_dumpall > /saves/pleroma-`date +%Y-%m-%d-%H-%M`.pgdump" + diff --git a/pleroma/crontab b/pleroma/crontab new file mode 100644 index 0000000..52654ce --- /dev/null +++ b/pleroma/crontab @@ -0,0 +1,2 @@ +00 23 * * * bash /backup.sh + diff --git a/pleroma/default.conf b/pleroma/default.conf new file mode 100644 index 0000000..56c96c7 --- /dev/null +++ b/pleroma/default.conf @@ -0,0 +1,94 @@ +# default nginx site config for Pleroma +# +# Simple installation instructions: +# 1. Install your TLS certificate, possibly using Let's Encrypt. +# 2. Replace 'example.tld' with your instance's domain wherever it appears. +# 3. Copy this file to /etc/nginx/sites-available/ and then add a symlink to it +# in /etc/nginx/sites-enabled/ and run 'nginx -s reload' or restart nginx. + +proxy_cache_path /tmp/pleroma-media-cache levels=1:2 keys_zone=pleroma_media_cache:10m max_size=10g + inactive=720m use_temp_path=off; + +server { + server_name replaceME; + + listen 80; + listen [::]:80; + + # Uncomment this if you need to use the 'webroot' method with certbot. Make sure + # that the directory exists and that it is accessible by the webserver. If you followed + # the guide, you already ran 'mkdir -p /var/lib/letsencrypt' to create the folder. + # You may need to load this file with the ssl server block commented out, run certbot + # to get the certificate, and then uncomment it. + # + # location ~ /\.well-known/acme-challenge { + # root /var/lib/letsencrypt/; + # } + location / { + return 301 https://$server_name$request_uri; + } +} + +# Enable SSL session caching for improved performance +#ssl_session_cache shared:ssl_session_cache:10m; + +server { + server_name replaceME; + + #listen 443 ssl http2; + listen 0.0.0.0:443 ssl http2; + listen [::]:443 ssl http2; + ssl_session_timeout 1d; + ssl_session_cache shared:MozSSL:10m; # about 40000 sessions + ssl_session_tickets off; + + ssl_certificate /etc/ssl/certs/nginx-selfsigned.crt; + ssl_certificate_key /etc/ssl/certs/nginx-selfsigned.key; + + ssl_protocols TLSv1.2 TLSv1.3; + ssl_ciphers "ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:!aNULL:!eNULL:!EXPORT:!DES:!MD5:!PSK:!RC4"; + ssl_prefer_server_ciphers off; + # In case of an old server with an OpenSSL version of 1.0.2 or below, + # leave only prime256v1 or comment out the following line. + ssl_ecdh_curve X25519:prime256v1:secp384r1:secp521r1; + ssl_stapling on; + ssl_stapling_verify on; + + gzip_vary on; + gzip_proxied any; + gzip_comp_level 6; + gzip_buffers 16 8k; + gzip_http_version 1.1; + gzip_types text/plain text/css application/json application/javascript text/xml application/xml application/xml+rss text/javascript application/activity+json application/atom+xml; + + # the nginx default is 1m, not enough for large media uploads + client_max_body_size 16m; + + location / { + proxy_http_version 1.1; + proxy_set_header Upgrade $http_upgrade; + proxy_set_header Connection "upgrade"; + proxy_set_header Host $http_host; + proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; + + # this is explicitly IPv4 since Pleroma.Web.Endpoint binds on IPv4 only + # and `localhost.` resolves to [::0] on some systems: see issue #930 + proxy_pass http://127.0.0.1:4000; + + client_max_body_size 16m; + } + + location ~ ^/(media|proxy) { + proxy_cache pleroma_media_cache; + slice 1m; + proxy_cache_key $host$uri$is_args$args$slice_range; + proxy_set_header Range $slice_range; + proxy_http_version 1.1; + proxy_cache_valid 200 206 301 304 1h; + proxy_cache_lock on; + proxy_ignore_client_abort on; + proxy_buffering on; + chunked_transfer_encoding on; + proxy_pass http://127.0.0.1:4000; + } +} diff --git a/pleroma/restore.sh b/pleroma/restore.sh new file mode 100644 index 0000000..8ced6ce --- /dev/null +++ b/pleroma/restore.sh @@ -0,0 +1,11 @@ +#!/bin/bash +clear +/etc/init.d/postgresql stop +su postgres -s $SHELL -lc "mkdir /var/lib/postgresql/data;chmod 0700 /var/lib/postgresql/data" +chown -R postgres:postgres /var/lib/postgresql +/etc/init.d/postgresql start +sleep 5 + +su postgres -s $SHELL -lc "/usr/lib/postgresql/12/bin/psql -f `ls /saves/pleroma* | sort -r | head -1`" +sleep 10 +su postgres -s $SHELL -lc "/usr/lib/postgresql/12/bin/vacuumdb --all --analyze-in-stages" diff --git a/pleroma/setup.sh b/pleroma/setup.sh new file mode 100644 index 0000000..7005eae --- /dev/null +++ b/pleroma/setup.sh @@ -0,0 +1,43 @@ +#!/bin/bash +export SHELL="/bin/bash" + +sed -i "s/replaceME/${ENDPOINT}/g" /etc/pleroma/config.exs + +#Nginx and SSL +sed -i "s/replaceME/${ENDPOINT}/g" /etc/nginx/conf.d/default.conf +openssl req -new -newkey rsa:4096 -days 365 -nodes -x509 -subj "/C=US/ST=CO/L=Denver/O=$ENDPOINT/CN=$ENDPOINT" -keyout /etc/ssl/certs/nginx-selfsigned.key -out /etc/ssl/certs/nginx-selfsigned.crt +mkdir /var/run/nginx + +#Database Setup +sleep 10 +export PGPASSWORD="sql" +echo "CREATE EXTENSION IF NOT EXISTS citext;"| PGPASSWORD=sql psql -h postgresql -U pleroma +echo "CREATE EXTENSION IF NOT EXISTS pg_trgm;" | PGPASSWORD=sql psql psql -h postgresql -U pleroma +echo "CREATE EXTENSION IF NOT EXISTS \"uuid-ossp\";" | PGPASSWORD=sql psql -h postgresql -U pleroma +su pleroma -s $SHELL -lc "/opt/pleroma/bin/pleroma_ctl migrate" + +#su pleroma -s $SHELL -lc "./bin/pleroma_ctl instance gen --output /etc/pleroma/config.exs --output-psql /tmp/setup_db.psql --force" +#su postgres -s $SHELL -lc "/usr/lib/postgresql/12/bin/psql -f /tmp/setup_db.psql" + +#Create Pleroma Uploads Directory +mkdir /var/lib/pleroma/uploads +chown -R pleroma /var/lib/pleroma/uploads + +#Start Pleroma +su pleroma -s $SHELL -lc "/opt/pleroma/bin/pleroma daemon" + +#Install Soapbox +curl -L https://gitlab.com/soapbox-pub/soapbox-fe/-/jobs/artifacts/v1.3.0/download?job=build-production -o soapbox-fe.zip +busybox unzip /tmp/soapbox-fe.zip -o -d /var/lib/pleroma/ +mv /var/lib/pleroma/static/instance/about.example /var/lib/pleroma/static/instance/about +cp -f /tmp//terms-of-service.html /var/lib/pleroma/static/instance/about/tos.html +cp -f /tmp/terms-of-service.html /var/lib/pleroma/static/instance/about/index.html + + +#Create an Admin User +echo;echo;echo "Sleeping for 30 seconds so Pleroma starts.........." +sleep 30 +echo;echo;echo "Create and Admin User:" +su pleroma -s $SHELL -lc "echo y | ./bin/pleroma_ctl user new admin admin@$ENDPOINT --admin" + +touch /configured.txt diff --git a/pleroma/start.sh b/pleroma/start.sh new file mode 100644 index 0000000..362ee7a --- /dev/null +++ b/pleroma/start.sh @@ -0,0 +1,32 @@ +#!/bin/bash +export SHELL="/bin/bash" +FILE='/configured.txt' + +# Start the instance to verify that everything is working as expected + +#Set Permissions +chown -R pleroma /var/lib/pleroma +chmod -R 777 /saves + +#Configure Local Time +cp -f /usr/share/zoneinfo/US/Mountain /etc/localtime + +#Start Cron and Postgresql +/etc/init.d/cron start + +#Restore latest Database if container is new +if [ ! -f "$FILE" ] +then +#bash /restore.sh +bash /setup.sh +touch /configured.txt +fi + +#Configure and start Nginx +mkdir -p /run/nginx +nginx + +#Start Pleroma +su pleroma -s $SHELL -lc "/opt/pleroma/bin/pleroma daemon"& + +tail -f /dev/null diff --git a/pleroma/terms-of-service.html b/pleroma/terms-of-service.html new file mode 100644 index 0000000..371ee89 --- /dev/null +++ b/pleroma/terms-of-service.html @@ -0,0 +1,16 @@ +This is MOSTLY a free speech instance. There are are rules and standards of conduct here. + +

1. Pornography is discouraged. Mark as NSFW. No LOLI or Child pornography. +

2. Going out of your way to cause trouble with other friendly instances will not be tolerated. +

3. Do not post anything that violates the law of the United States. +

4. Free speech, here as anywhere else, means you can express any opinion you like. Directives and spam are not opinions. +

5. Accounts with no public posts may be purged after two weeks +

6. We will take down anything that gets us into legal trouble. +
Services Offered +

1. Git Repository +

2. Private Search Engine - Searx +

3. Personal Website/Blog based on Succulent +

4. Pleroma Access (This Server) +

5. Matrix Chat Server (Like Discord). +

6. BloatFE Soapbox + \ No newline at end of file diff --git a/postgresql/Dockerfile b/postgresql/Dockerfile new file mode 100644 index 0000000..2836be8 --- /dev/null +++ b/postgresql/Dockerfile @@ -0,0 +1,20 @@ +FROM ubuntu:rolling +ENV DEBIAN_FRONTEND=noninteractive +RUN apt-get update;apt-get install sudo postgresql -y + +WORKDIR /tmp +ENV SHELL="/bin/bash" + +ADD start.sh / +ADD setup.sh / + +ADD crontab / +RUN crontab /crontab + +ADD backup.sh / + +#POSTGRES Tweaks +ADD postgresql.conf /etc/postgresql/13/main/ +RUN echo "host all all 0.0.0.0/0 md5" >> /etc/postgresql/13/main/pg_hba.conf + +CMD bash /start.sh diff --git a/postgresql/backup.sh b/postgresql/backup.sh new file mode 100644 index 0000000..9241efb --- /dev/null +++ b/postgresql/backup.sh @@ -0,0 +1,3 @@ +#!/bin/bash +su postgres -s /bin/bash -lc "/usr/lib/postgresql/12/bin/pg_dumpall > /saves/pleroma-`date +%Y-%m-%d-%H-%M`.pgdump" + diff --git a/postgresql/crontab b/postgresql/crontab new file mode 100644 index 0000000..52654ce --- /dev/null +++ b/postgresql/crontab @@ -0,0 +1,2 @@ +00 23 * * * bash /backup.sh + diff --git a/postgresql/postgresql.conf b/postgresql/postgresql.conf new file mode 100644 index 0000000..5c81b87 --- /dev/null +++ b/postgresql/postgresql.conf @@ -0,0 +1,770 @@ +# ----------------------------- +# PostgreSQL configuration file +# ----------------------------- +# +# This file consists of lines of the form: +# +# name = value +# +# (The "=" is optional.) Whitespace may be used. Comments are introduced with +# "#" anywhere on a line. The complete list of parameter names and allowed +# values can be found in the PostgreSQL documentation. +# +# The commented-out settings shown in this file represent the default values. +# Re-commenting a setting is NOT sufficient to revert it to the default value; +# you need to reload the server. +# +# This file is read on server startup and when the server receives a SIGHUP +# signal. If you edit the file on a running system, you have to SIGHUP the +# server for the changes to take effect, run "pg_ctl reload", or execute +# "SELECT pg_reload_conf()". Some parameters, which are marked below, +# require a server shutdown and restart to take effect. +# +# Any parameter can also be given as a command-line option to the server, e.g., +# "postgres -c log_connections=on". Some parameters can be changed at run time +# with the "SET" SQL command. +# +# Memory units: kB = kilobytes Time units: ms = milliseconds +# MB = megabytes s = seconds +# GB = gigabytes min = minutes +# TB = terabytes h = hours +# d = days + + +#------------------------------------------------------------------------------ +# FILE LOCATIONS +#------------------------------------------------------------------------------ + +# The default values of these variables are driven from the -D command-line +# option or PGDATA environment variable, represented here as ConfigDir. + +data_directory = '/var/lib/postgresql/13/main' # use data in another directory + # (change requires restart) +hba_file = '/etc/postgresql/13/main/pg_hba.conf' # host-based authentication file + # (change requires restart) +ident_file = '/etc/postgresql/13/main/pg_ident.conf' # ident configuration file + # (change requires restart) + +# If external_pid_file is not explicitly set, no extra PID file is written. +external_pid_file = '/var/run/postgresql/13-main.pid' # write an extra PID file + # (change requires restart) + + +#------------------------------------------------------------------------------ +# CONNECTIONS AND AUTHENTICATION +#------------------------------------------------------------------------------ + +# - Connection Settings - + +#listen_addresses = 'localhost' # what IP address(es) to listen on; + # comma-separated list of addresses; + # defaults to 'localhost'; use '*' for all + # (change requires restart) +listen_addresses = '*' +port = 5432 # (change requires restart) +max_connections = 200 # (change requires restart) +#superuser_reserved_connections = 3 # (change requires restart) +unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories + # (change requires restart) +#unix_socket_group = '' # (change requires restart) +#unix_socket_permissions = 0777 # begin with 0 to use octal notation + # (change requires restart) +#bonjour = off # advertise server via Bonjour + # (change requires restart) +#bonjour_name = '' # defaults to the computer name + # (change requires restart) + +# - TCP settings - +# see "man 7 tcp" for details + +#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; + # 0 selects the system default +#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; + # 0 selects the system default +#tcp_keepalives_count = 0 # TCP_KEEPCNT; + # 0 selects the system default +#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; + # 0 selects the system default + +# - Authentication - + +#authentication_timeout = 1min # 1s-600s +#password_encryption = md5 # md5 or scram-sha-256 +#db_user_namespace = off + +# GSSAPI using Kerberos +#krb_server_keyfile = '' +#krb_caseins_users = off + +# - SSL - + +ssl = on +#ssl_ca_file = '' +ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem' +#ssl_crl_file = '' +ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key' +#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers +#ssl_prefer_server_ciphers = on +#ssl_ecdh_curve = 'prime256v1' +#ssl_min_protocol_version = 'TLSv1' +#ssl_max_protocol_version = '' +#ssl_dh_params_file = '' +#ssl_passphrase_command = '' +#ssl_passphrase_command_supports_reload = off + + +#------------------------------------------------------------------------------ +# RESOURCE USAGE (except WAL) +#------------------------------------------------------------------------------ + +# - Memory - + +shared_buffers = 128MB # min 128kB + # (change requires restart) +#huge_pages = try # on, off, or try + # (change requires restart) +#temp_buffers = 8MB # min 800kB +#max_prepared_transactions = 0 # zero disables the feature + # (change requires restart) +# Caution: it is not advisable to set max_prepared_transactions nonzero unless +# you actively intend to use prepared transactions. +#work_mem = 4MB # min 64kB +#maintenance_work_mem = 64MB # min 1MB +#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem +#max_stack_depth = 2MB # min 100kB +#shared_memory_type = mmap # the default is the first option + # supported by the operating system: + # mmap + # sysv + # windows + # (change requires restart) +dynamic_shared_memory_type = posix # the default is the first option + # supported by the operating system: + # posix + # sysv + # windows + # mmap + # (change requires restart) + +# - Disk - + +#temp_file_limit = -1 # limits per-process temp file space + # in kB, or -1 for no limit + +# - Kernel Resources - + +#max_files_per_process = 1000 # min 25 + # (change requires restart) + +# - Cost-Based Vacuum Delay - + +#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) +#vacuum_cost_page_hit = 1 # 0-10000 credits +#vacuum_cost_page_miss = 10 # 0-10000 credits +#vacuum_cost_page_dirty = 20 # 0-10000 credits +#vacuum_cost_limit = 200 # 1-10000 credits + +# - Background Writer - + +#bgwriter_delay = 200ms # 10-10000ms between rounds +#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables +#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round +#bgwriter_flush_after = 512kB # measured in pages, 0 disables + +# - Asynchronous Behavior - + +#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching +#max_worker_processes = 8 # (change requires restart) +#max_parallel_maintenance_workers = 2 # taken from max_parallel_workers +#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers +#parallel_leader_participation = on +#max_parallel_workers = 8 # maximum number of max_worker_processes that + # can be used in parallel operations +#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate + # (change requires restart) +#backend_flush_after = 0 # measured in pages, 0 disables + + +#------------------------------------------------------------------------------ +# WRITE-AHEAD LOG +#------------------------------------------------------------------------------ + +# - Settings - + +#wal_level = replica # minimal, replica, or logical + # (change requires restart) +#fsync = on # flush data to disk for crash safety + # (turning this off can cause + # unrecoverable data corruption) +#synchronous_commit = on # synchronization level; + # off, local, remote_write, remote_apply, or on +#wal_sync_method = fsync # the default is the first option + # supported by the operating system: + # open_datasync + # fdatasync (default on Linux) + # fsync + # fsync_writethrough + # open_sync +#full_page_writes = on # recover from partial page writes +#wal_compression = off # enable compression of full-page writes +#wal_log_hints = off # also do full page writes of non-critical updates + # (change requires restart) +#wal_init_zero = on # zero-fill new WAL files +#wal_recycle = on # recycle WAL files +#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers + # (change requires restart) +#wal_writer_delay = 200ms # 1-10000 milliseconds +#wal_writer_flush_after = 1MB # measured in pages, 0 disables + +#commit_delay = 0 # range 0-100000, in microseconds +#commit_siblings = 5 # range 1-1000 + +# - Checkpoints - + +#checkpoint_timeout = 5min # range 30s-1d +max_wal_size = 1GB +min_wal_size = 80MB +#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0 +#checkpoint_flush_after = 256kB # measured in pages, 0 disables +#checkpoint_warning = 30s # 0 disables + +# - Archiving - + +#archive_mode = off # enables archiving; off, on, or always + # (change requires restart) +#archive_command = '' # command to use to archive a logfile segment + # placeholders: %p = path of file to archive + # %f = file name only + # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' +#archive_timeout = 0 # force a logfile segment switch after this + # number of seconds; 0 disables + +# - Archive Recovery - + +# These are only used in recovery mode. + +#restore_command = '' # command to use to restore an archived logfile segment + # placeholders: %p = path of file to restore + # %f = file name only + # e.g. 'cp /mnt/server/archivedir/%f %p' + # (change requires restart) +#archive_cleanup_command = '' # command to execute at every restartpoint +#recovery_end_command = '' # command to execute at completion of recovery + +# - Recovery Target - + +# Set these only when performing a targeted recovery. + +#recovery_target = '' # 'immediate' to end recovery as soon as a + # consistent state is reached + # (change requires restart) +#recovery_target_name = '' # the named restore point to which recovery will proceed + # (change requires restart) +#recovery_target_time = '' # the time stamp up to which recovery will proceed + # (change requires restart) +#recovery_target_xid = '' # the transaction ID up to which recovery will proceed + # (change requires restart) +#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed + # (change requires restart) +#recovery_target_inclusive = on # Specifies whether to stop: + # just after the specified recovery target (on) + # just before the recovery target (off) + # (change requires restart) +#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID + # (change requires restart) +#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' + # (change requires restart) + + +#------------------------------------------------------------------------------ +# REPLICATION +#------------------------------------------------------------------------------ + +# - Sending Servers - + +# Set these on the master and on any standby that will send replication data. + +#max_wal_senders = 10 # max number of walsender processes + # (change requires restart) +#wal_keep_segments = 0 # in logfile segments; 0 disables +#wal_sender_timeout = 60s # in milliseconds; 0 disables + +#max_replication_slots = 10 # max number of replication slots + # (change requires restart) +#track_commit_timestamp = off # collect timestamp of transaction commit + # (change requires restart) + +# - Master Server - + +# These settings are ignored on a standby server. + +#synchronous_standby_names = '' # standby servers that provide sync rep + # method to choose sync standbys, number of sync standbys, + # and comma-separated list of application_name + # from standby(s); '*' = all +#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed + +# - Standby Servers - + +# These settings are ignored on a master server. + +#primary_conninfo = '' # connection string to sending server + # (change requires restart) +#primary_slot_name = '' # replication slot on sending server + # (change requires restart) +#promote_trigger_file = '' # file name whose presence ends recovery +#hot_standby = on # "off" disallows queries during recovery + # (change requires restart) +#max_standby_archive_delay = 30s # max delay before canceling queries + # when reading WAL from archive; + # -1 allows indefinite delay +#max_standby_streaming_delay = 30s # max delay before canceling queries + # when reading streaming WAL; + # -1 allows indefinite delay +#wal_receiver_status_interval = 10s # send replies at least this often + # 0 disables +#hot_standby_feedback = off # send info from standby to prevent + # query conflicts +#wal_receiver_timeout = 60s # time that receiver waits for + # communication from master + # in milliseconds; 0 disables +#wal_retrieve_retry_interval = 5s # time to wait before retrying to + # retrieve WAL after a failed attempt +#recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery + +# - Subscribers - + +# These settings are ignored on a publisher. + +#max_logical_replication_workers = 4 # taken from max_worker_processes + # (change requires restart) +#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers + + +#------------------------------------------------------------------------------ +# QUERY TUNING +#------------------------------------------------------------------------------ + +# - Planner Method Configuration - + +#enable_bitmapscan = on +#enable_hashagg = on +#enable_hashjoin = on +#enable_indexscan = on +#enable_indexonlyscan = on +#enable_material = on +#enable_mergejoin = on +#enable_nestloop = on +#enable_parallel_append = on +#enable_seqscan = on +#enable_sort = on +#enable_tidscan = on +#enable_partitionwise_join = off +#enable_partitionwise_aggregate = off +#enable_parallel_hash = on +#enable_partition_pruning = on + +# - Planner Cost Constants - + +#seq_page_cost = 1.0 # measured on an arbitrary scale +#random_page_cost = 4.0 # same scale as above +#cpu_tuple_cost = 0.01 # same scale as above +#cpu_index_tuple_cost = 0.005 # same scale as above +#cpu_operator_cost = 0.0025 # same scale as above +#parallel_tuple_cost = 0.1 # same scale as above +#parallel_setup_cost = 1000.0 # same scale as above + +#jit_above_cost = 100000 # perform JIT compilation if available + # and query more expensive than this; + # -1 disables +#jit_inline_above_cost = 500000 # inline small functions if query is + # more expensive than this; -1 disables +#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if + # query is more expensive than this; + # -1 disables + +#min_parallel_table_scan_size = 8MB +#min_parallel_index_scan_size = 512kB +#effective_cache_size = 4GB + +# - Genetic Query Optimizer - + +#geqo = on +#geqo_threshold = 12 +#geqo_effort = 5 # range 1-10 +#geqo_pool_size = 0 # selects default based on effort +#geqo_generations = 0 # selects default based on effort +#geqo_selection_bias = 2.0 # range 1.5-2.0 +#geqo_seed = 0.0 # range 0.0-1.0 + +# - Other Planner Options - + +#default_statistics_target = 100 # range 1-10000 +#constraint_exclusion = partition # on, off, or partition +#cursor_tuple_fraction = 0.1 # range 0.0-1.0 +#from_collapse_limit = 8 +#join_collapse_limit = 8 # 1 disables collapsing of explicit + # JOIN clauses +#force_parallel_mode = off +#jit = on # allow JIT compilation +#plan_cache_mode = auto # auto, force_generic_plan or + # force_custom_plan + + +#------------------------------------------------------------------------------ +# REPORTING AND LOGGING +#------------------------------------------------------------------------------ + +# - Where to Log - + +#log_destination = 'stderr' # Valid values are combinations of + # stderr, csvlog, syslog, and eventlog, + # depending on platform. csvlog + # requires logging_collector to be on. + +# This is used when logging to stderr: +#logging_collector = off # Enable capturing of stderr and csvlog + # into log files. Required to be on for + # csvlogs. + # (change requires restart) + +# These are only used if logging_collector is on: +#log_directory = 'log' # directory where log files are written, + # can be absolute or relative to PGDATA +#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern, + # can include strftime() escapes +#log_file_mode = 0600 # creation mode for log files, + # begin with 0 to use octal notation +#log_truncate_on_rotation = off # If on, an existing log file with the + # same name as the new log file will be + # truncated rather than appended to. + # But such truncation only occurs on + # time-driven rotation, not on restarts + # or size-driven rotation. Default is + # off, meaning append to existing files + # in all cases. +#log_rotation_age = 1d # Automatic rotation of logfiles will + # happen after that time. 0 disables. +#log_rotation_size = 10MB # Automatic rotation of logfiles will + # happen after that much log output. + # 0 disables. + +# These are relevant when logging to syslog: +#syslog_facility = 'LOCAL0' +#syslog_ident = 'postgres' +#syslog_sequence_numbers = on +#syslog_split_messages = on + +# This is only relevant when logging to eventlog (win32): +# (change requires restart) +#event_source = 'PostgreSQL' + +# - When to Log - + +#log_min_messages = warning # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic + +#log_min_error_statement = error # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic (effectively off) + +#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements + # and their durations, > 0 logs only + # statements running at least this number + # of milliseconds + +#log_transaction_sample_rate = 0.0 # Fraction of transactions whose statements + # are logged regardless of their duration. 1.0 logs all + # statements from all transactions, 0.0 never logs. + +# - What to Log - + +#debug_print_parse = off +#debug_print_rewritten = off +#debug_print_plan = off +#debug_pretty_print = on +#log_checkpoints = off +#log_connections = off +#log_disconnections = off +#log_duration = off +#log_error_verbosity = default # terse, default, or verbose messages +#log_hostname = off +log_line_prefix = '%m [%p] %q%u@%d ' # special values: + # %a = application name + # %u = user name + # %d = database name + # %r = remote host and port + # %h = remote host + # %p = process ID + # %t = timestamp without milliseconds + # %m = timestamp with milliseconds + # %n = timestamp with milliseconds (as a Unix epoch) + # %i = command tag + # %e = SQL state + # %c = session ID + # %l = session line number + # %s = session start timestamp + # %v = virtual transaction ID + # %x = transaction ID (0 if none) + # %q = stop here in non-session + # processes + # %% = '%' + # e.g. '<%u%%%d> ' +#log_lock_waits = off # log lock waits >= deadlock_timeout +#log_statement = 'none' # none, ddl, mod, all +#log_replication_commands = off +#log_temp_files = -1 # log temporary files equal or larger + # than the specified size in kilobytes; + # -1 disables, 0 logs all temp files +log_timezone = 'Etc/UTC' + +#------------------------------------------------------------------------------ +# PROCESS TITLE +#------------------------------------------------------------------------------ + +cluster_name = '12/main' # added to process titles if nonempty + # (change requires restart) +#update_process_title = on + + +#------------------------------------------------------------------------------ +# STATISTICS +#------------------------------------------------------------------------------ + +# - Query and Index Statistics Collector - + +#track_activities = on +#track_counts = on +#track_io_timing = off +#track_functions = none # none, pl, all +#track_activity_query_size = 1024 # (change requires restart) +stats_temp_directory = '/var/run/postgresql/12-main.pg_stat_tmp' + + +# - Monitoring - + +#log_parser_stats = off +#log_planner_stats = off +#log_executor_stats = off +#log_statement_stats = off + + +#------------------------------------------------------------------------------ +# AUTOVACUUM +#------------------------------------------------------------------------------ + +#autovacuum = on # Enable autovacuum subprocess? 'on' + # requires track_counts to also be on. +#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and + # their durations, > 0 logs only + # actions running at least this number + # of milliseconds. +#autovacuum_max_workers = 3 # max number of autovacuum subprocesses + # (change requires restart) +#autovacuum_naptime = 1min # time between autovacuum runs +#autovacuum_vacuum_threshold = 50 # min number of row updates before + # vacuum +#autovacuum_analyze_threshold = 50 # min number of row updates before + # analyze +#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum +#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze +#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum + # (change requires restart) +#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age + # before forced vacuum + # (change requires restart) +#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for + # autovacuum, in milliseconds; + # -1 means use vacuum_cost_delay +#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for + # autovacuum, -1 means use + # vacuum_cost_limit + + +#------------------------------------------------------------------------------ +# CLIENT CONNECTION DEFAULTS +#------------------------------------------------------------------------------ + +# - Statement Behavior - + +#client_min_messages = notice # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # log + # notice + # warning + # error +#search_path = '"$user", public' # schema names +#row_security = on +#default_tablespace = '' # a tablespace name, '' uses the default +#temp_tablespaces = '' # a list of tablespace names, '' uses + # only default tablespace +#default_table_access_method = 'heap' +#check_function_bodies = on +#default_transaction_isolation = 'read committed' +#default_transaction_read_only = off +#default_transaction_deferrable = off +#session_replication_role = 'origin' +#statement_timeout = 0 # in milliseconds, 0 is disabled +#lock_timeout = 0 # in milliseconds, 0 is disabled +#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled +#vacuum_freeze_min_age = 50000000 +#vacuum_freeze_table_age = 150000000 +#vacuum_multixact_freeze_min_age = 5000000 +#vacuum_multixact_freeze_table_age = 150000000 +#vacuum_cleanup_index_scale_factor = 0.1 # fraction of total number of tuples + # before index cleanup, 0 always performs + # index cleanup +#bytea_output = 'hex' # hex, escape +#xmlbinary = 'base64' +#xmloption = 'content' +#gin_fuzzy_search_limit = 0 +#gin_pending_list_limit = 4MB + +# - Locale and Formatting - + +datestyle = 'iso, mdy' +#intervalstyle = 'postgres' +timezone = 'Etc/UTC' +#timezone_abbreviations = 'Default' # Select the set of available time zone + # abbreviations. Currently, there are + # Default + # Australia (historical usage) + # India + # You can create your own file in + # share/timezonesets/. +#extra_float_digits = 1 # min -15, max 3; any value >0 actually + # selects precise output mode +#client_encoding = sql_ascii # actually, defaults to database + # encoding + +# These settings are initialized by initdb, but they can be changed. +lc_messages = 'C.UTF-8' # locale for system error message + # strings +lc_monetary = 'C.UTF-8' # locale for monetary formatting +lc_numeric = 'C.UTF-8' # locale for number formatting +lc_time = 'C.UTF-8' # locale for time formatting + +# default configuration for text search +default_text_search_config = 'pg_catalog.english' + +# - Shared Library Preloading - + +#shared_preload_libraries = '' # (change requires restart) +#local_preload_libraries = '' +#session_preload_libraries = '' +#jit_provider = 'llvmjit' # JIT library to use + +# - Other Defaults - + +#dynamic_library_path = '$libdir' + + +#------------------------------------------------------------------------------ +# LOCK MANAGEMENT +#------------------------------------------------------------------------------ + +#deadlock_timeout = 1s +#max_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_relation = -2 # negative values mean + # (max_pred_locks_per_transaction + # / -max_pred_locks_per_relation) - 1 +#max_pred_locks_per_page = 2 # min 0 + + +#------------------------------------------------------------------------------ +# VERSION AND PLATFORM COMPATIBILITY +#------------------------------------------------------------------------------ + +# - Previous PostgreSQL Versions - + +#array_nulls = on +#backslash_quote = safe_encoding # on, off, or safe_encoding +#escape_string_warning = on +#lo_compat_privileges = off +#operator_precedence_warning = off +#quote_all_identifiers = off +#standard_conforming_strings = on +#synchronize_seqscans = on + +# - Other Platforms and Clients - + +#transform_null_equals = off + + +#------------------------------------------------------------------------------ +# ERROR HANDLING +#------------------------------------------------------------------------------ + +#exit_on_error = off # terminate session on any error? +#restart_after_crash = on # reinitialize after backend crash? +#data_sync_retry = off # retry or panic on failure to fsync + # data? + # (change requires restart) + + +#------------------------------------------------------------------------------ +# CONFIG FILE INCLUDES +#------------------------------------------------------------------------------ + +# These options allow settings to be loaded from files other than the +# default postgresql.conf. Note that these are directives, not variable +# assignments, so they can usefully be given more than once. + +include_dir = 'conf.d' # include files ending in '.conf' from + # a directory, e.g., 'conf.d' +#include_if_exists = '...' # include file only if it exists +#include = '...' # include file + + +#------------------------------------------------------------------------------ +# CUSTOMIZED OPTIONS +#------------------------------------------------------------------------------ + +# Add settings for extensions here +shared_buffers = 2024MB +effective_cache_size = 1536MB +maintenance_work_mem = 128MB +work_mem = 26214kB +effective_cache_size = 6GB +maintenance_work_mem = 512MB +checkpoint_completion_target = 0.7 +wal_buffers = 16MB +default_statistics_target = 100 +random_page_cost = 4 +effective_io_concurrency = 2 +work_mem = 5242kB +min_wal_size = 1GB +max_wal_size = 4GB +max_worker_processes = 4 +max_parallel_workers_per_gather = 2 +max_parallel_workers = 4 +max_parallel_maintenance_workers = 2 + diff --git a/postgresql/setup.sh b/postgresql/setup.sh new file mode 100644 index 0000000..1fb3b4f --- /dev/null +++ b/postgresql/setup.sh @@ -0,0 +1,19 @@ +#!/bin/bash +export SHELL="/bin/bash" + +#Database Setup +mkdir /run/postgresql +mkdir -p /var/lib/postgresql/13/main +chown -R postgres:postgres /run/postgresql/ +chown -R postgres:postgres /var/lib/postgresql +chown -R postgres:postgres /var/log/postgresql +su postgres -s $SHELL -lc "mkdir /var/lib/postgresql/data;chmod 0700 /var/lib/postgresql/data" + +/etc/init.d/postgresql start +sleep 5 +echo "CREATE USER pleroma WITH ENCRYPTED PASSWORD 'sql';" | su postgres -s $SHELL -lc psql +echo "create user root with encrypted password 'sql';"| su postgres -s $SHELL -lc psql +echo "ALTER ROLE pleroma SUPERUSER;" | su postgres -s $SHELL -lc psql +echo "CREATE DATABASE pleroma OWNER pleroma;" | su postgres -s $SHELL -lc psql +echo "grant all privileges on database pleroma to pleroma;" | su postgres -s $SHELL -lc psql +touch /configured.txt diff --git a/postgresql/start.sh b/postgresql/start.sh new file mode 100644 index 0000000..e570dee --- /dev/null +++ b/postgresql/start.sh @@ -0,0 +1,23 @@ +#!/bin/bash +export SHELL="/bin/bash" +FILE='/configured.txt' + +#Set Permissions +chmod -R 777 /saves + +#Configure Local Time +cp -f /usr/share/zoneinfo/US/Mountain /etc/localtime + +#Start Cron and Postgresql +/etc/init.d/cron start +/etc/init.d/postgresql start + +#Restore latest Database if container is new +if [ ! -f "$FILE" ] +then +#bash /restore.sh +bash /setup.sh +touch /configured.txt +fi + +tail -f /dev/null diff --git a/relays.txt b/relays.txt new file mode 100644 index 0000000..7619309 --- /dev/null +++ b/relays.txt @@ -0,0 +1,39 @@ +https://nth.io/relay +https://shitposter.club/relay +https://iddqd.social/relay +https://neckbeard.xyz/relay +https://kiwifarms.cc/relay +https://fedi.absturztau.be/relay +https://pleroma.site/relay +https://gleasonator.com/relay +https://pleroma.soykaf.com/relay +https://434.earth/relay +https://blob.cat/relay +https://zefirchik.xyz/relay +https://jaeger.website/relay +https://expired.mentality.rip/relay +https://pl.devfs.xyz/relay +https://freespeechextremist.com/relay +https://pl.moggy.xyz/relay +https://yggdrasil.social/relay +https://anime.website/relay +https://freesoftwareextremist.com/relay +https://pleroma.wolfie.pw/relay +https://relay.canberrasocial.net/actor +https://pleroma.mouse.services/relay +https://netzsphaere.xyz/relay +https://stereophonic.space/relay +https://counter.fedi.live/relay +https://traboone.com/relay +https://outerheaven.club/relay +https://lain.sh/relay +https://society.kalli.st/relay +https://lain.com/relay +https://pler.spearman.xyz/relay +https://fiume.club/relay +https://frennet.link/relay +https://cock.fish/relay +https://pirateradio.social/relay +https://pleroma.retardcenter.xyz/relay +https://freespeech.group/relay +https://relay.fedi.agency/actor diff --git a/test.sh b/test.sh new file mode 100644 index 0000000..ec44964 --- /dev/null +++ b/test.sh @@ -0,0 +1,8 @@ +#!/bin/bash +docker-compose kill +docker-compose rm -f +docker volume rm pleroma_postgresql +docker-compose build +rm -rf var/uploads +docker-compose up -d +docker-compose logs -f diff --git a/update.sh b/update.sh new file mode 100644 index 0000000..358ae7d --- /dev/null +++ b/update.sh @@ -0,0 +1,8 @@ +#!/bin/bash +su pleroma -s $SHELL -lc "/opt/pleroma/bin/pleroma_ctl update" +su pleroma -s $SHELL -lc "/opt/pleroma/bin/pleroma_ctl migrate" +su pleroma -s $SHELL -lc "/opt/pleroma/bin/pleroma stop" +#su pleroma -s $SHELL -lc "/opt/pleroma/bin/pleroma daemon" +su pleroma -s $SHELL -lc "/opt/pleroma/bin/pleroma restart" + + diff --git a/var/.placeholder b/var/.placeholder new file mode 100644 index 0000000..e69de29